From: Wolfram Sang <wsa@the-dreams.de>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org, linux-sh@vger.kernel.org,
Magnus Damm <magnus.damm@gmail.com>,
Simon Horman <horms@verge.net.au>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
Lars-Peter Clausen <lars@metafoo.de>,
Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
Subject: Re: [PATCH RESEND 1/3] drm: adv7511: really enable interrupts for EDID detection
Date: Mon, 04 Jan 2016 16:11:57 +0000 [thread overview]
Message-ID: <20160104161157.GB1599@katana> (raw)
In-Reply-To: <1537546.GLmkeJiXH5@avalon>
[-- Attachment #1: Type: text/plain, Size: 1842 bytes --]
On Mon, Jan 04, 2016 at 04:37:44PM +0200, Laurent Pinchart wrote:
> Hi Wolfram,
>
> Thank you for the patch.
>
> On Monday 04 January 2016 03:33:45 Wolfram Sang wrote:
> > From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> >
> > The interrupts for EDID_READY or DDC_ERROR were never enabled in this
> > driver, so reading EDID always timed out when chip was powered down and
> > interrupts were used. Fix this and remove clearing the interrupt flags,
> > they are cleared in POWER_DOWN mode anyhow (according to docs and my
> > tests).
> >
> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> > ---
> > drivers/gpu/drm/i2c/adv7511.c | 25 +++++++++++++++++--------
> > 1 file changed, 17 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
> > index 00416f23b5cb5f..85e994796d96a4 100644
> > --- a/drivers/gpu/drm/i2c/adv7511.c
> > +++ b/drivers/gpu/drm/i2c/adv7511.c
> > @@ -362,12 +362,19 @@ static void adv7511_power_on(struct adv7511 *adv7511)
> > {
> > adv7511->current_edid_segment = -1;
> >
> > - regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
> > - ADV7511_INT0_EDID_READY);
> > - regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
> > - ADV7511_INT1_DDC_ERROR);
> > regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
> > ADV7511_POWER_POWER_DOWN, 0);
> > + if (adv7511->i2c_main->irq) {
> > + /*
> > + * Documentation says the INT_ENABLE registers are reset in
> > + * POWER_DOWN mode. My tests with a 7511w show something else
> > + * but let's stick to the documentation.
>
> This contradicts the commit message, which one is correct ?
As Geert mentioned, the commit message refers to the interrupt flags not
the interrupt_enable flags.
Shall I rephrase?
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
prev parent reply other threads:[~2016-01-04 16:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 2:33 [PATCH RESEND 1/3] drm: adv7511: really enable interrupts for EDID detection Wolfram Sang
2016-01-04 2:33 ` [PATCH RESEND 2/3] drm: adv7511: mark ADV7511_REG_EDID_READ_CTRL volatile Wolfram Sang
2016-01-04 14:38 ` Laurent Pinchart
2016-01-04 16:10 ` Wolfram Sang
2016-01-04 2:33 ` [PATCH RESEND 3/3] drm: adv7511: it's HPD, not HDP Wolfram Sang
2016-01-04 14:28 ` Lars-Peter Clausen
2016-01-04 14:38 ` Laurent Pinchart
2016-01-04 6:53 ` [PATCH RESEND 1/3] drm: adv7511: really enable interrupts for EDID detection Archit Taneja
2016-01-04 14:37 ` Laurent Pinchart
2016-01-04 14:59 ` Geert Uytterhoeven
2016-01-04 16:11 ` Wolfram Sang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160104161157.GB1599@katana \
--to=wsa@the-dreams.de \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@gmail.com \
--cc=lars@metafoo.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox