Re: [PATCH v2 0/4] i2c: pca-platform: additional improvements

[Wolfram Sang <wsa@the-dreams.de>]

[-- Attachment #1: Type: text/plain, Size: 1163 bytes --]

On Wed, Jul 05, 2017 at 10:13:54PM +1200, Chris Packham wrote:
> This series addresses some of the points identified by Andy. The series is
> based on top of i2c/for-next. 2 of the patches from v1 have already been
> applied so I've dropped them from this version.
> 
> I have compile tested patch 1/1 but I don't have access to sh hardware
> to actually test the changes on.
> 
> Chris Packham (4):
>   sh: sh7785lcr: add GPIO lookup table for i2c controller reset
>   i2c: pca-platform: unconditionally use devm_gpiod_get_optional
>   i2c: pca-platform: use device_property_read_u32
>   i2c: pca-platform: drop gpio from platform data
> 
>  arch/blackfin/mach-bf561/boards/acvilon.c |  1 -
>  arch/sh/boards/board-sh7785lcr.c          | 11 +++++++++-
>  drivers/i2c/busses/i2c-pca-platform.c     | 34 +++++++++----------------------
>  include/linux/i2c-pca-platform.h          |  3 ---
>  4 files changed, 20 insertions(+), 29 deletions(-)

Series looks good to me, too. I'd need ACKs from the SH maintainers,
though. Technically, from Blackfin maintainers as well. But I haven't
heard from them in months, so I could go without that.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]