Re: [PATCH v2 0/4] i2c: pca-platform: additional improvements

[Wolfram Sang <wsa@the-dreams.de>]

[-- Attachment #1: Type: text/plain, Size: 1303 bytes --]

On Sun, Oct 29, 2017 at 06:29:18PM +0100, Wolfram Sang wrote:
> On Wed, Jul 05, 2017 at 10:13:54PM +1200, Chris Packham wrote:
> > This series addresses some of the points identified by Andy. The series is
> > based on top of i2c/for-next. 2 of the patches from v1 have already been
> > applied so I've dropped them from this version.
> > 
> > I have compile tested patch 1/1 but I don't have access to sh hardware
> > to actually test the changes on.
> > 
> > Chris Packham (4):
> >   sh: sh7785lcr: add GPIO lookup table for i2c controller reset
> >   i2c: pca-platform: unconditionally use devm_gpiod_get_optional
> >   i2c: pca-platform: use device_property_read_u32
> >   i2c: pca-platform: drop gpio from platform data
> > 
> >  arch/blackfin/mach-bf561/boards/acvilon.c |  1 -
> >  arch/sh/boards/board-sh7785lcr.c          | 11 +++++++++-
> >  drivers/i2c/busses/i2c-pca-platform.c     | 34 +++++++++----------------------
> >  include/linux/i2c-pca-platform.h          |  3 ---
> >  4 files changed, 20 insertions(+), 29 deletions(-)
> 
> Series looks good to me, too. I'd need ACKs from the SH maintainers,
> though. Technically, from Blackfin maintainers as well. But I haven't
> heard from them in months, so I could go without that.

Adding Rich Felker to CC...


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]