Re: [PATCH v2 9/9] media: i2c: tw9910: Remove soc_camera dependencies

[jacopo mondi <jacopo@jmondi.org>]

Hi Laurent,

On Tue, Jan 02, 2018 at 05:50:38PM +0200, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Thursday, 28 December 2017 16:01:21 EET Jacopo Mondi wrote:
> > -	priv->clk = v4l2_clk_get(&client->dev, "mclk");
> > -	if (IS_ERR(priv->clk))
> > +	priv->clk = clk_get(&client->dev, "mclk");
>
> The clock signal is called XTI (see page 60 of http://www.tecworth.com/
> administrator/upload/200956419240864.pdf). You should add a clock alias as for
> the ov7725.

I don't think Migo-R board code should provide any alias for XTI
clock, as the clock is generated by an on-board oscillator and not
from the SoC.

Also, changing the name in the driver seems safe, as `git grep tw9910
arch/` returns that only mach-ecovec uses TW9910 (Migo-R apart) and it
seems like also in that case the clock comes from an oscillator and it
is not provided by the SoC.

>
> > +	if (PTR_ERR(priv->clk) = -ENOENT) {
> > +		priv->clk = NULL;
> > +	} else if (IS_ERR(priv->clk)) {
> > +		dev_err(&client->dev, "Unable to get mclk clock\n");
> >  		return PTR_ERR(priv->clk);
> > +	}
> > +
> > +	priv->pdn_gpio = gpiod_get_optional(&client->dev, "pdn",
> > +					    GPIOD_OUT_HIGH);
> > +	if (IS_ERR(priv->pdn_gpio)) {
> > +		dev_info(&client->dev, "Unable to get GPIO \"pdn\"");
> > +		ret = PTR_ERR(priv->pdn_gpio);
> > +		goto error_clk_put;
> > +	}
> >
> >  	ret = tw9910_video_probe(client);
> >  	if (ret < 0)
> > -		v4l2_clk_put(priv->clk);
> > +		goto error_gpio_put;
> > +
> > +	ret = v4l2_async_register_subdev(&priv->subdev);
> > +	if (ret)
> > +		goto error_gpio_put;
> > +
> > +	return ret;
> > +
> > +error_gpio_put:
> > +	if (priv->pdn_gpio)
> > +		gpiod_put(priv->pdn_gpio);
> > +error_clk_put:
> > +	clk_put(priv->clk);
> >
> >  	return ret;
> >  }
>
> [snip]
>
> With these small issues fixed, and the comments to ov7725 that apply to tw9910
> addressed,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Thanks
   j

>
> --
> Regards,
>
> Laurent Pinchart
>