From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: Re: [RFC 2/3] ARM: shmobile: r8a7793: use generic "renesas,rcar-gen2" machine
Date: Sat, 23 May 2015 18:02:26 +0000 [thread overview]
Message-ID: <2297771.6zOlWIIOB5@avalon> (raw)
In-Reply-To: <1432205413-9584-3-git-send-email-ulrich.hecht+renesas@gmail.com>
Hi Ulrich,
Thank you for the patch.
On Thursday 21 May 2015 12:50:12 Ulrich Hecht wrote:
> Removes the unnecessary SoC-specific setup code and uses the generic
> R-Car Gen2 machine.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm/boot/dts/r8a7793-gose.dts | 2 +-
> arch/arm/boot/dts/r8a7793.dtsi | 2 +-
> arch/arm/mach-shmobile/Makefile | 1 -
> arch/arm/mach-shmobile/setup-r8a7793.c | 34 -------------------------------
> 4 files changed, 2 insertions(+), 37 deletions(-)
> delete mode 100644 arch/arm/mach-shmobile/setup-r8a7793.c
>
> diff --git a/arch/arm/boot/dts/r8a7793-gose.dts
> b/arch/arm/boot/dts/r8a7793-gose.dts index 1edeba2..f6c5803 100644
> --- a/arch/arm/boot/dts/r8a7793-gose.dts
> +++ b/arch/arm/boot/dts/r8a7793-gose.dts
> @@ -34,7 +34,7 @@
>
> / {
> model = "Gose";
> - compatible = "renesas,gose", "renesas,r8a7793";
> + compatible = "renesas,gose", "renesas,r8a7793", "renesas,rcar-gen2";
>
> aliases {
> serial0 = &scif0;
> diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
> index 7ab3902..ea96479 100644
> --- a/arch/arm/boot/dts/r8a7793.dtsi
> +++ b/arch/arm/boot/dts/r8a7793.dtsi
> @@ -13,7 +13,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> - compatible = "renesas,r8a7793";
> + compatible = "renesas,r8a7793", "renesas,rcar-gen2";
> interrupt-parent = <&gic>;
> #address-cells = <2>;
> #size-cells = <2>;
> diff --git a/arch/arm/mach-shmobile/Makefile
> b/arch/arm/mach-shmobile/Makefile index a8f5d5d..81431c9 100644
> --- a/arch/arm/mach-shmobile/Makefile
> +++ b/arch/arm/mach-shmobile/Makefile
> @@ -13,7 +13,6 @@ obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
> obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o
> obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
> obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o
> -obj-$(CONFIG_ARCH_R8A7793) += setup-r8a7793.o
> obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o
> obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
> obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
> diff --git a/arch/arm/mach-shmobile/setup-r8a7793.c
> b/arch/arm/mach-shmobile/setup-r8a7793.c deleted file mode 100644
> index 2d7f18a..0000000
> --- a/arch/arm/mach-shmobile/setup-r8a7793.c
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -/*
> - * r8a7793 processor support
> - *
> - * Copyright (C) 2015 Ulrich Hecht
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; version 2 of the License.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#include <linux/init.h>
> -#include <asm/mach/arch.h>
> -
> -#include "common.h"
> -#include "r8a7793.h"
> -#include "rcar-gen2.h"
> -
> -static const char *r8a7793_boards_compat_dt[] __initconst = {
> - "renesas,r8a7793",
> - NULL,
> -};
> -
> -DT_MACHINE_START(R8A7793_DT, "Generic R8A7793 (Flattened Device Tree)")
> - .init_early = shmobile_init_delay,
> - .init_time = rcar_gen2_timer_init,
> - .init_late = shmobile_init_late,
> - .reserve = rcar_gen2_reserve,
> - .dt_compat = r8a7793_boards_compat_dt,
> -MACHINE_END
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2015-05-23 18:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-21 10:50 [RFC 2/3] ARM: shmobile: r8a7793: use generic "renesas,rcar-gen2" machine Ulrich Hecht
2015-05-23 18:02 ` Laurent Pinchart [this message]
2015-05-26 8:02 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2297771.6zOlWIIOB5@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox