From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurent Pinchart Date: Wed, 14 Oct 2015 11:41:42 +0000 Subject: Re: [PATCH] ARM: shmobile: defconfig: enable HDMI output for RCar Message-Id: <2447761.tSSFxNPgWH@avalon> List-Id: References: <1407974835-11064-1-git-send-email-khilman@linaro.org> In-Reply-To: <1407974835-11064-1-git-send-email-khilman@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org Hi Geert, On Wednesday 14 October 2015 09:07:41 Geert Uytterhoeven wrote: > On Wed, Oct 14, 2015 at 3:09 AM, Laurent Pinchart wrote: > >> Tested with a Lager board and using both I2C/IIC. Based on my testings in > >> Dublin with a Koelsch board, I'd be very surprised if it fails with > >> Koelsch. Laurent may prove me wrong ;) > > > > I've tried to reproduce the problem tonight and couldn't, even without > > your recent i2c-rcar patches :-/ I'll keep running tests on Koelsch with > > that configuration and make sure to report any issue I can find. > > The Koelsch that failed has a much newer U-Boot (b653737dfca2), which > only enables the MSTP clocks that are really needed, while you and I have > much older versions (I have b6af5fcc8dfc). It failed on my Koelsch before, and I have never updated U-Boot on it. -- Regards, Laurent Pinchart