[PATCH 01/19] serial: sh-sci: Enable the driver on all ARM platforms

[PATCH 01/19] serial: sh-sci: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/tty/serial/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index febd45c..2976fa4 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -709,7 +709,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || ARCH_SHMOBILE)
+	depends on HAVE_CLK && (SUPERH || ARM)
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
-- 
1.8.1.5

[PATCH 02/19] DMA: shdma: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/dma/sh/Kconfig  | 2 +-
 drivers/dma/sh/shdmac.c | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig
index dadd9e01..4aab56d 100644
--- a/drivers/dma/sh/Kconfig
+++ b/drivers/dma/sh/Kconfig
@@ -4,7 +4,7 @@
 
 config SH_DMAE_BASE
 	bool "Renesas SuperH DMA Engine support"
-	depends on (SUPERH && SH_DMA) || (ARM && ARCH_SHMOBILE)
+	depends on (SUPERH && SH_DMA) || ARM
 	depends on !SH_DMA_API
 	default y
 	select DMA_ENGINE
diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c
index 1069e88..3625078 100644
--- a/drivers/dma/sh/shdmac.c
+++ b/drivers/dma/sh/shdmac.c
@@ -787,7 +787,7 @@ static int sh_dmae_probe(struct platform_device *pdev)
 	if (err)
 		goto rst_err;
 
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARM)
 	chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
 
 	if (!chanirq_res)
@@ -812,7 +812,7 @@ static int sh_dmae_probe(struct platform_device *pdev)
 
 #else
 	chanirq_res = errirq_res;
-#endif /* CONFIG_CPU_SH4 || CONFIG_ARCH_SHMOBILE */
+#endif /* CONFIG_CPU_SH4 || CONFIG_ARM */
 
 	if (chanirq_res->start = chanirq_res->end &&
 	    !platform_get_resource(pdev, IORESOURCE_IRQ, 1)) {
@@ -879,7 +879,7 @@ edmadevreg:
 chan_probe_err:
 	sh_dmae_chan_remove(shdev);
 
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARM)
 eirq_err:
 #endif
 rst_err:
-- 
1.8.1.5

[PATCH 03/19] i2c: sh_mobile: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index cdcbd83..6adce91 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -665,7 +665,7 @@ config I2C_SH7760
 
 config I2C_SH_MOBILE
 	tristate "SuperH Mobile I2C Controller"
-	depends on SUPERH || ARCH_SHMOBILE
+	depends on SUPERH || ARM
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Renesas SH-Mobile processor.
-- 
1.8.1.5

Re: [PATCH 03/19] i2c: sh_mobile: Enable the driver on all ARM platforms

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 631 bytes --]

On Tue, Oct 29, 2013 at 12:46:51AM +0100, Laurent Pinchart wrote:
> Renesas ARM platforms are transitioning from single-platform to
> multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
> and ARCH_SHMOBILE_MULTI and increase build testing coverage.
> 
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: linux-i2c@vger.kernel.org
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

I wonder if those two Kconfig patches couldn't be squashed, but other
than that:

Acked-by: Wolfram Sang <wsa@the-dreams.de>

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 03/19] i2c: sh_mobile: Enable the driver on all ARM platforms

[Laurent Pinchart]

[-- Attachment #1: Type: text/plain, Size: 836 bytes --]

Hi Wolfram,

On Tuesday 29 October 2013 06:03:37 Wolfram Sang wrote:
> On Tue, Oct 29, 2013 at 12:46:51AM +0100, Laurent Pinchart wrote:
> > Renesas ARM platforms are transitioning from single-platform to
> > multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> > driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
> > and ARCH_SHMOBILE_MULTI and increase build testing coverage.
> > 
> > Cc: Wolfram Sang <wsa@the-dreams.de>
> > Cc: linux-i2c@vger.kernel.org
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> 
> I wonder if those two Kconfig patches couldn't be squashed, but other
> than that:
> 
> Acked-by: Wolfram Sang <wsa@the-dreams.de>

Thank you. Please feel free to squash the patches together when applying if 
needed.

-- 
Regards,

Laurent Pinchart

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

[PATCH 04/19] input: sh_keysc: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/input/keyboard/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c1edd39..7ac6a716e 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -525,7 +525,7 @@ config KEYBOARD_SUNKBD
 
 config KEYBOARD_SH_KEYSC
 	tristate "SuperH KEYSC keypad support"
-	depends on SUPERH || ARCH_SHMOBILE
+	depends on SUPERH || ARM
 	help
 	  Say Y here if you want to use a keypad attached to the KEYSC block
 	  on SuperH processors such as sh7722 and sh7343.
-- 
1.8.1.5

[PATCH 05/19] iommu: shmobile: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/iommu/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index c880eba..3e7fdbb 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -206,7 +206,7 @@ config SHMOBILE_IPMMU_TLB
 config SHMOBILE_IOMMU
 	bool "IOMMU for Renesas IPMMU/IPMMUI"
 	default n
-	depends on (ARM && ARCH_SHMOBILE)
+	depends on ARM
 	select IOMMU_API
 	select ARM_DMA_USE_IOMMU
 	select SHMOBILE_IPMMU
-- 
1.8.1.5

[PATCH 06/19] i2c: rcar: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Remove the explicit I2C dependency as the configuration option is
already unavailable when I2C support is disabled.

Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6adce91..468c28a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -768,7 +768,7 @@ config I2C_XLR
 
 config I2C_RCAR
 	tristate "Renesas R-Car I2C Controller"
-	depends on ARCH_SHMOBILE && I2C
+	depends on ARM
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
-- 
1.8.1.5

Re: [PATCH 06/19] i2c: rcar: Enable the driver on all ARM platforms

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 674 bytes --]

On Tue, Oct 29, 2013 at 12:46:54AM +0100, Laurent Pinchart wrote:
> Renesas ARM platforms are transitioning from single-platform to
> multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
> and ARCH_SHMOBILE_MULTI and increase build testing coverage.
> 
> Remove the explicit I2C dependency as the configuration option is
> already unavailable when I2C support is disabled.
> 
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: linux-i2c@vger.kernel.org
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Acked-by: Wolfram Sang <wsa@the-dreams.de>


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 07/19] v4l: sh_vou: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/media/platform/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index c7caf94..a726f86 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -36,7 +36,7 @@ source "drivers/media/platform/blackfin/Kconfig"
 config VIDEO_SH_VOU
 	tristate "SuperH VOU video output driver"
 	depends on MEDIA_CAMERA_SUPPORT
-	depends on VIDEO_DEV && ARCH_SHMOBILE && I2C
+	depends on VIDEO_DEV && ARM && I2C
 	select VIDEOBUF_DMA_CONTIG
 	help
 	  Support for the Video Output Unit (VOU) on SuperH SoCs.
-- 
1.8.1.5

Re: [PATCH 07/19] v4l: sh_vou: Enable the driver on all ARM platforms

[Mauro Carvalho Chehab]

Hi Laurent,

Em Tue, 29 Oct 2013 00:46:55 +0100
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> escreveu:

> Renesas ARM platforms are transitioning from single-platform to
> multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
> and ARCH_SHMOBILE_MULTI and increase build testing coverage.
> 
> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
> Cc: linux-media@vger.kernel.org
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

I'm understanding that the plan is to commit it via an ARM tree, right?

If so:
	Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

PS.: With regards to the discussions about this patch series,
I'm ok on having this enabled for all archs or just for the
archs that are known have this IP block, of course provided that
not includes to march are there.

The rationale is that, in the specific case of V4L, the platform 
drivers are already on a separate Kconfig menu, with makes no sense
to be enabled on any non SoC configuration.

> ---
>  drivers/media/platform/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index c7caf94..a726f86 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -36,7 +36,7 @@ source "drivers/media/platform/blackfin/Kconfig"
>  config VIDEO_SH_VOU
>  	tristate "SuperH VOU video output driver"
>  	depends on MEDIA_CAMERA_SUPPORT
> -	depends on VIDEO_DEV && ARCH_SHMOBILE && I2C
> +	depends on VIDEO_DEV && ARM && I2C
>  	select VIDEOBUF_DMA_CONTIG
>  	help
>  	  Support for the Video Output Unit (VOU) on SuperH SoCs.


-- 

Cheers,
Mauro

Re: [PATCH 07/19] v4l: sh_vou: Enable the driver on all ARM platforms

[Laurent Pinchart]

Hi Mauro,

On Wednesday 30 October 2013 10:26:23 Mauro Carvalho Chehab wrote:
> Em Tue, 29 Oct 2013 00:46:55 +0100 Laurent Pinchart escreveu:
> > Renesas ARM platforms are transitioning from single-platform to
> > multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> > driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
> > and ARCH_SHMOBILE_MULTI and increase build testing coverage.
> > 
> > Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
> > Cc: linux-media@vger.kernel.org
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> 
> I'm understanding that the plan is to commit it via an ARM tree, right?

Actually the plan is to get this upstream through you tree :-) However, I'm 
trying a different approach to the problem, so I'll post a new version of the 
patch set in the near future.

> If so:
> 	Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
> 
> PS.: With regards to the discussions about this patch series, I'm ok on
> having this enabled for all archs or just for the archs that are known have
> this IP block, of course provided that not includes to march are there.
> 
> The rationale is that, in the specific case of V4L, the platform drivers are
> already on a separate Kconfig menu, with makes no sense to be enabled on any
> non SoC configuration.

We will likely split dependencies on two lines in Kconfig, one for the build-
time dependencies and one for the runtime dependencies. A driver that compiles 
on ARM only and supports hardware that is present on ARCH_SHMOBILE SoCs only 
would thus have

	depends on ARM
	depends on ARCH_SHMOBILE || COMPILE_TEST

Build-time dependencies on other software components (I2C for instance) would 
be listed on the first line. The code below would become

	depends on VIDEO_DEV && I2C
	depends on ARCH_SHMOBILE || COMPILE_TEST

> > ---
> > 
> >  drivers/media/platform/Kconfig | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/media/platform/Kconfig
> > b/drivers/media/platform/Kconfig index c7caf94..a726f86 100644
> > --- a/drivers/media/platform/Kconfig
> > +++ b/drivers/media/platform/Kconfig
> > @@ -36,7 +36,7 @@ source "drivers/media/platform/blackfin/Kconfig"
> >  config VIDEO_SH_VOU
> >  	tristate "SuperH VOU video output driver"
> >  	depends on MEDIA_CAMERA_SUPPORT
> > -	depends on VIDEO_DEV && ARCH_SHMOBILE && I2C
> > +	depends on VIDEO_DEV && ARM && I2C
> >  	select VIDEOBUF_DMA_CONTIG
> >  	help
> >  	  Support for the Video Output Unit (VOU) on SuperH SoCs.
-- 
Regards,

Laurent Pinchart

[PATCH 08/19] mmc: sdhi: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Chris Ball <cjb@laptop.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/mmc/host/Kconfig        | 2 +-
 drivers/mmc/host/tmio_mmc_dma.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 7fc5099..51957d4 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -479,7 +479,7 @@ config MMC_TMIO
 
 config MMC_SDHI
 	tristate "SH-Mobile SDHI SD/SDIO controller support"
-	depends on SUPERH || ARCH_SHMOBILE
+	depends on SUPERH || ARM
 	select MMC_TMIO_CORE
 	help
 	  This provides support for the SDHI SD/SDIO controller found in
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
index 65edb4a..535bc35 100644
--- a/drivers/mmc/host/tmio_mmc_dma.c
+++ b/drivers/mmc/host/tmio_mmc_dma.c
@@ -28,7 +28,7 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
 	if (!host->chan_tx || !host->chan_rx)
 		return;
 
-#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
+#if defined(CONFIG_SUPERH) || defined(CONFIG_ARM)
 	/* Switch DMA mode on or off - SuperH specific? */
 	sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
 #endif
-- 
1.8.1.5

Re: [PATCH 08/19] mmc: sdhi: Enable the driver on all ARM platforms

[Guennadi Liakhovetski]

Hi Laurent

On Tue, 29 Oct 2013, Laurent Pinchart wrote:

> Renesas ARM platforms are transitioning from single-platform to
> multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
> and ARCH_SHMOBILE_MULTI and increase build testing coverage.
> 
> Cc: Chris Ball <cjb@laptop.org>
> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> Cc: Ian Molton <ian@mnementh.co.uk>
> Cc: linux-mmc@vger.kernel.org
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
>  drivers/mmc/host/Kconfig        | 2 +-
>  drivers/mmc/host/tmio_mmc_dma.c | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 7fc5099..51957d4 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -479,7 +479,7 @@ config MMC_TMIO
>  
>  config MMC_SDHI
>  	tristate "SH-Mobile SDHI SD/SDIO controller support"
> -	depends on SUPERH || ARCH_SHMOBILE
> +	depends on SUPERH || ARM
>  	select MMC_TMIO_CORE
>  	help
>  	  This provides support for the SDHI SD/SDIO controller found in
> diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
> index 65edb4a..535bc35 100644
> --- a/drivers/mmc/host/tmio_mmc_dma.c
> +++ b/drivers/mmc/host/tmio_mmc_dma.c
> @@ -28,7 +28,7 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
>  	if (!host->chan_tx || !host->chan_rx)
>  		return;
>  
> -#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
> +#if defined(CONFIG_SUPERH) || defined(CONFIG_ARM)

I'm not sure about this one. In principle DMA so far is only used on SDHI 
with TMIO. But this #if was for a theoretical case, when a TMIO MMC IP 
inside an MFD is also used with DMA. Bus since I had no indormation about 
whether the CTL_DMA_ENABLE register was SDHI specific or not, I put it 
under an #if for the time being. In any case, I don't think making it 
#ifdef CONFIG_ARM makes much sense. We can either remove the #if 
completely, or keep it to limit the scope of this write to sh-mobile 
arches.

Thanks
Guennadi

>  	/* Switch DMA mode on or off - SuperH specific? */
>  	sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
>  #endif
> -- 
> 1.8.1.5
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/

Re: [PATCH 08/19] mmc: sdhi: Enable the driver on all ARM platforms

[Laurent Pinchart]

Hi Guennadi,

On Tuesday 29 October 2013 10:07:29 Guennadi Liakhovetski wrote:
> Hi Laurent
> 
> On Tue, 29 Oct 2013, Laurent Pinchart wrote:
> > Renesas ARM platforms are transitioning from single-platform to
> > multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> > driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
> > and ARCH_SHMOBILE_MULTI and increase build testing coverage.
> > 
> > Cc: Chris Ball <cjb@laptop.org>
> > Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > Cc: Ian Molton <ian@mnementh.co.uk>
> > Cc: linux-mmc@vger.kernel.org
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> > 
> >  drivers/mmc/host/Kconfig        | 2 +-
> >  drivers/mmc/host/tmio_mmc_dma.c | 2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> > index 7fc5099..51957d4 100644
> > --- a/drivers/mmc/host/Kconfig
> > +++ b/drivers/mmc/host/Kconfig
> > @@ -479,7 +479,7 @@ config MMC_TMIO
> > 
> >  config MMC_SDHI
> >  
> >  	tristate "SH-Mobile SDHI SD/SDIO controller support"
> > 
> > -	depends on SUPERH || ARCH_SHMOBILE
> > +	depends on SUPERH || ARM
> > 
> >  	select MMC_TMIO_CORE
> >  	help
> >  	
> >  	  This provides support for the SDHI SD/SDIO controller found in
> > 
> > diff --git a/drivers/mmc/host/tmio_mmc_dma.c
> > b/drivers/mmc/host/tmio_mmc_dma.c index 65edb4a..535bc35 100644
> > --- a/drivers/mmc/host/tmio_mmc_dma.c
> > +++ b/drivers/mmc/host/tmio_mmc_dma.c
> > @@ -28,7 +28,7 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host,
> > bool enable)> 
> >  	if (!host->chan_tx || !host->chan_rx)
> >  	
> >  		return;
> > 
> > -#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
> > +#if defined(CONFIG_SUPERH) || defined(CONFIG_ARM)
> 
> I'm not sure about this one. In principle DMA so far is only used on SDHI
> with TMIO. But this #if was for a theoretical case, when a TMIO MMC IP
> inside an MFD is also used with DMA. Bus since I had no indormation about
> whether the CTL_DMA_ENABLE register was SDHI specific or not, I put it
> under an #if for the time being. In any case, I don't think making it
> #ifdef CONFIG_ARM makes much sense. We can either remove the #if
> completely, or keep it to limit the scope of this write to sh-mobile
> arches.

SUPERH || ARCH_SHMOBILE covers all the platforms this driver currently builds 
on. Now that we're adding ARCH_SHMOBILE_MULTI the #if needs to cover that case 
as well. I'm fine with limiting the CTL_DMA_ENABLE write to SUPERH only (which 
would modify the driver's behaviour) or enabling it unconditionally, but I 
don't think adding a defined(CONFIG_ARCH_SHMOBILE_MULTI) to the above #if 
makes sense, unless there's a plan to add support for DMA for non-SH 
(including both SUPERH and ARCH_SHMOBILE) platforms.

> >  	/* Switch DMA mode on or off - SuperH specific? */
> >  	sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
> >  
> >  #endif

-- 
Regards,

Laurent Pinchart

Re: [PATCH 08/19] mmc: sdhi: Enable the driver on all ARM platforms

[Sergei Shtylyov]

Hello.

On 29-10-2013 13:52, Laurent Pinchart wrote:

>>> Renesas ARM platforms are transitioning from single-platform to
>>> multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
>>> driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
>>> and ARCH_SHMOBILE_MULTI and increase build testing coverage.

>>> Cc: Chris Ball <cjb@laptop.org>
>>> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
>>> Cc: Ian Molton <ian@mnementh.co.uk>
>>> Cc: linux-mmc@vger.kernel.org
>>> Signed-off-by: Laurent Pinchart
>>> <laurent.pinchart+renesas@ideasonboard.com>
[...]

>>> diff --git a/drivers/mmc/host/tmio_mmc_dma.c
>>> b/drivers/mmc/host/tmio_mmc_dma.c index 65edb4a..535bc35 100644
>>> --- a/drivers/mmc/host/tmio_mmc_dma.c
>>> +++ b/drivers/mmc/host/tmio_mmc_dma.c
>>> @@ -28,7 +28,7 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host,
>>> bool enable)>
>>>   	if (!host->chan_tx || !host->chan_rx)
>>>   	
>>>   		return;
>>>
>>> -#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
>>> +#if defined(CONFIG_SUPERH) || defined(CONFIG_ARM)

>> I'm not sure about this one. In principle DMA so far is only used on SDHI
>> with TMIO. But this #if was for a theoretical case, when a TMIO MMC IP
>> inside an MFD is also used with DMA. Bus since I had no indormation about
>> whether the CTL_DMA_ENABLE register was SDHI specific or not, I put it
>> under an #if for the time being. In any case, I don't think making it
>> #ifdef CONFIG_ARM makes much sense. We can either remove the #if
>> completely, or keep it to limit the scope of this write to sh-mobile
>> arches.

> SUPERH || ARCH_SHMOBILE covers all the platforms this driver currently builds
> on. Now that we're adding ARCH_SHMOBILE_MULTI the #if needs to cover that case
> as well. I'm fine with limiting the CTL_DMA_ENABLE write to SUPERH only (which
> would modify the driver's behaviour)

    I'm afraid that would break the driver's ability to work in DMA mode on 
SH-Mobile SoCs.

> or enabling it unconditionally, but I
> don't think adding a defined(CONFIG_ARCH_SHMOBILE_MULTI) to the above #if
> makes sense, unless there's a plan to add support for DMA for non-SH
> (including both SUPERH and ARCH_SHMOBILE) platforms.

    Not only the plan -- I have already posted the patches to do it for 
R8A777x, and Simon has queued them for 3.13.

>>>   	/* Switch DMA mode on or off - SuperH specific? */
>>>   	sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
>>>
>>>   #endif

WBR, Sergei

Re: [PATCH 08/19] mmc: sdhi: Enable the driver on all ARM platforms

[Laurent Pinchart]

Hi Sergei,

On Tuesday 29 October 2013 16:12:49 Sergei Shtylyov wrote:
> On 29-10-2013 13:52, Laurent Pinchart wrote:
> >>> Renesas ARM platforms are transitioning from single-platform to
> >>> multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> >>> driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
> >>> and ARCH_SHMOBILE_MULTI and increase build testing coverage.
> >>> 
> >>> Cc: Chris Ball <cjb@laptop.org>
> >>> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> >>> Cc: Ian Molton <ian@mnementh.co.uk>
> >>> Cc: linux-mmc@vger.kernel.org
> >>> Signed-off-by: Laurent Pinchart
> >>> <laurent.pinchart+renesas@ideasonboard.com>
> 
> [...]
> 
> >>> diff --git a/drivers/mmc/host/tmio_mmc_dma.c
> >>> b/drivers/mmc/host/tmio_mmc_dma.c index 65edb4a..535bc35 100644
> >>> --- a/drivers/mmc/host/tmio_mmc_dma.c
> >>> +++ b/drivers/mmc/host/tmio_mmc_dma.c
> >>> @@ -28,7 +28,7 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host,
> >>> bool enable)>
> >>> 
> >>>   	if (!host->chan_tx || !host->chan_rx)
> >>>   	
> >>>   		return;
> >>> 
> >>> -#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
> >>> +#if defined(CONFIG_SUPERH) || defined(CONFIG_ARM)
> >> 
> >> I'm not sure about this one. In principle DMA so far is only used on SDHI
> >> with TMIO. But this #if was for a theoretical case, when a TMIO MMC IP
> >> inside an MFD is also used with DMA. Bus since I had no indormation about
> >> whether the CTL_DMA_ENABLE register was SDHI specific or not, I put it
> >> under an #if for the time being. In any case, I don't think making it
> >> #ifdef CONFIG_ARM makes much sense. We can either remove the #if
> >> completely, or keep it to limit the scope of this write to sh-mobile
> >> arches.
> > 
> > SUPERH || ARCH_SHMOBILE covers all the platforms this driver currently
> > builds on. Now that we're adding ARCH_SHMOBILE_MULTI the #if needs to
> > cover that case as well. I'm fine with limiting the CTL_DMA_ENABLE write
> > to SUPERH only (which would modify the driver's behaviour)
> 
> I'm afraid that would break the driver's ability to work in DMA mode on SH-
> Mobile SoCs.

So can you confirm that writing the CTL_DMA_ENABLE register is required on all 
Renesas ARM SoCs (including SH-Mobile, R-Mobile and R-Car) ?

> > or enabling it unconditionally, but I don't think adding a
> > defined(CONFIG_ARCH_SHMOBILE_MULTI) to the above #if makes sense, unless
> > there's a plan to add support for DMA for non-SH (including both SUPERH
> > and ARCH_SHMOBILE) platforms.
> 
> Not only the plan -- I have already posted the patches to do it for R8A777x,
> and Simon has queued them for 3.13.

Could you please point me to those patches ?

> >>>   	/* Switch DMA mode on or off - SuperH specific? */
> >>>   	sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
> >>>   
> >>>   #endif

-- 
Regards,

Laurent Pinchart

Re: [PATCH 08/19] mmc: sdhi: Enable the driver on all ARM platforms

[Sergei Shtylyov]

On 10/29/2013 04:15 PM, Laurent Pinchart wrote:

>>>>> Renesas ARM platforms are transitioning from single-platform to
>>>>> multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
>>>>> driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
>>>>> and ARCH_SHMOBILE_MULTI and increase build testing coverage.

>>>>> Cc: Chris Ball <cjb@laptop.org>
>>>>> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
>>>>> Cc: Ian Molton <ian@mnementh.co.uk>
>>>>> Cc: linux-mmc@vger.kernel.org
>>>>> Signed-off-by: Laurent Pinchart
>>>>> <laurent.pinchart+renesas@ideasonboard.com>

>> [...]

>>>>> diff --git a/drivers/mmc/host/tmio_mmc_dma.c
>>>>> b/drivers/mmc/host/tmio_mmc_dma.c index 65edb4a..535bc35 100644
>>>>> --- a/drivers/mmc/host/tmio_mmc_dma.c
>>>>> +++ b/drivers/mmc/host/tmio_mmc_dma.c
>>>>> @@ -28,7 +28,7 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host,
>>>>> bool enable)>
>>>>>
>>>>>    	if (!host->chan_tx || !host->chan_rx)
>>>>>    	
>>>>>    		return;

>>>>> -#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
>>>>> +#if defined(CONFIG_SUPERH) || defined(CONFIG_ARM)

>>>> I'm not sure about this one. In principle DMA so far is only used on SDHI
>>>> with TMIO. But this #if was for a theoretical case, when a TMIO MMC IP
>>>> inside an MFD is also used with DMA. Bus since I had no indormation about
>>>> whether the CTL_DMA_ENABLE register was SDHI specific or not, I put it
>>>> under an #if for the time being. In any case, I don't think making it
>>>> #ifdef CONFIG_ARM makes much sense. We can either remove the #if
>>>> completely, or keep it to limit the scope of this write to sh-mobile
>>>> arches.

>>> SUPERH || ARCH_SHMOBILE covers all the platforms this driver currently
>>> builds on. Now that we're adding ARCH_SHMOBILE_MULTI the #if needs to
>>> cover that case as well. I'm fine with limiting the CTL_DMA_ENABLE write
>>> to SUPERH only (which would modify the driver's behaviour)

>> I'm afraid that would break the driver's ability to work in DMA mode on SH-
>> Mobile SoCs.

> So can you confirm that writing the CTL_DMA_ENABLE register is required on all
> Renesas ARM SoCs (including SH-Mobile, R-Mobile and R-Car) ?

    I can't actually say anything about all SH-Mobile and R-Mobile SoCs, only 
about the R-Car SoCs: though the datasheets don't contain the SDHI register 
info, from my experience the register exists on R8A777x (I had to fix up the 
broken PIO fallback in the SDHI driver).

>>> or enabling it unconditionally, but I don't think adding a
>>> defined(CONFIG_ARCH_SHMOBILE_MULTI) to the above #if makes sense, unless
>>> there's a plan to add support for DMA for non-SH (including both SUPERH
>>> and ARCH_SHMOBILE) platforms.

>> Not only the plan -- I have already posted the patches to do it for R8A777x,
>> and Simon has queued them for 3.13.

> Could you please point me to those patches ?

https://git.kernel.org/cgit/linux/kernel/git/horms/renesas.git/commit/?h=next&id\x1eb6b5a0e55bfcfb0852b7d0f9442841ff807345
https://git.kernel.org/cgit/linux/kernel/git/horms/renesas.git/commit/?h=next&id¤3e5bd76a4a3df58167d85e8020a1c9e566ad75
https://git.kernel.org/cgit/linux/kernel/git/horms/renesas.git/commit/?h=next&id]6aa3435275a5308684f90c17424b055ef7f572
https://git.kernel.org/cgit/linux/kernel/git/horms/renesas.git/commit/?h=next&idæa8b11b82fdeaa78dad52552f945b772ee1a5c9

WBR, Sergei

Re: [PATCH 08/19] mmc: sdhi: Enable the driver on all ARM platforms

[Laurent Pinchart]

Hi Sergei,

On Tuesday 29 October 2013 23:47:36 Sergei Shtylyov wrote:
> On 10/29/2013 04:15 PM, Laurent Pinchart wrote:
> >>>>> Renesas ARM platforms are transitioning from single-platform to
> >>>>> multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> >>>>> driver available on all ARM platforms to enable it on both
> >>>>> ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI and increase build testing
> >>>>> coverage.
> >>>>> 
> >>>>> Cc: Chris Ball <cjb@laptop.org>
> >>>>> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> >>>>> Cc: Ian Molton <ian@mnementh.co.uk>
> >>>>> Cc: linux-mmc@vger.kernel.org
> >>>>> Signed-off-by: Laurent Pinchart
> >>>>> <laurent.pinchart+renesas@ideasonboard.com>
> >> 
> >> [...]
> >> 
> >>>>> diff --git a/drivers/mmc/host/tmio_mmc_dma.c
> >>>>> b/drivers/mmc/host/tmio_mmc_dma.c index 65edb4a..535bc35 100644
> >>>>> --- a/drivers/mmc/host/tmio_mmc_dma.c
> >>>>> +++ b/drivers/mmc/host/tmio_mmc_dma.c
> >>>>> @@ -28,7 +28,7 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host,
> >>>>> bool enable)>
> >>>>> 
> >>>>>    	if (!host->chan_tx || !host->chan_rx)
> >>>>>    	
> >>>>>    		return;
> >>>>> 
> >>>>> -#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE)
> >>>>> +#if defined(CONFIG_SUPERH) || defined(CONFIG_ARM)
> >>>> 
> >>>> I'm not sure about this one. In principle DMA so far is only used on
> >>>> SDHI with TMIO. But this #if was for a theoretical case, when a TMIO
> >>>> MMC IP inside an MFD is also used with DMA. Bus since I had no
> >>>> indormation about whether the CTL_DMA_ENABLE register was SDHI specific
> >>>> or not, I put it under an #if for the time being. In any case, I don't
> >>>> think making it #ifdef CONFIG_ARM makes much sense. We can either
> >>>> remove the #if completely, or keep it to limit the scope of this write
> >>>> to sh-mobile arches.
> >>> 
> >>> SUPERH || ARCH_SHMOBILE covers all the platforms this driver currently
> >>> builds on. Now that we're adding ARCH_SHMOBILE_MULTI the #if needs to
> >>> cover that case as well. I'm fine with limiting the CTL_DMA_ENABLE write
> >>> to SUPERH only (which would modify the driver's behaviour)
> >> 
> >> I'm afraid that would break the driver's ability to work in DMA mode on
> >> SH-Mobile SoCs.
> > 
> > So can you confirm that writing the CTL_DMA_ENABLE register is required on
> > all Renesas ARM SoCs (including SH-Mobile, R-Mobile and R-Car) ?
> 
> I can't actually say anything about all SH-Mobile and R-Mobile SoCs, only
> about the R-Car SoCs: though the datasheets don't contain the SDHI register
> info, from my experience the register exists on R8A777x (I had to fix up the
> broken PIO fallback in the SDHI driver).

OK.

> >>> or enabling it unconditionally, but I don't think adding a
> >>> defined(CONFIG_ARCH_SHMOBILE_MULTI) to the above #if makes sense, unless
> >>> there's a plan to add support for DMA for non-SH (including both SUPERH
> >>> and ARCH_SHMOBILE) platforms.
> >> 
> >> Not only the plan -- I have already posted the patches to do it for
> >> R8A777x, and Simon has queued them for 3.13.
> > 
> > Could you please point me to those patches ?
> 
> https://git.kernel.org/cgit/linux/kernel/git/horms/renesas.git/commit/?h=nex
> t&id\x1eb6b5a0e55bfcfb0852b7d0f9442841ff807345
> https://git.kernel.org/cgit/linux/kernel/git/horms/renesas.git/commit/?h=ne
> xt&id¤3e5bd76a4a3df58167d85e8020a1c9e566ad75
> https://git.kernel.org/cgit/linux/kernel/git/horms/renesas.git/commit/?h=ne
> xt&id]6aa3435275a5308684f90c17424b055ef7f572
> https://git.kernel.org/cgit/linux/kernel/git/horms/renesas.git/commit/?h=ne
> xt&idæa8b11b82fdeaa78dad52552f945b772ee1a5c9

But that's still an ARCH_SHMOBILE platform. Guennadi's point, if I understood 
it correctly, was that whether the CTL_DMA_ENABLE register is part of the 
standard TMIO controller, or is Renesas-specific, is unknown. As we have no 
current or planned TMIO DMA users other than SUPERH and ARCH_SHMOBILE this is 
impossible to test. That is why the code is conditionally compiled.

We could either get rid of the #if completely and always write to the 
register, or add ARCH_SHMOBILE_MULTI to the condition. I now agree that adding 
ARM as a dependency makes no sense. Given that this will break on 
multiplatform kernels anyway, I'm enclined to write to the CTL_DMA_ENABLE 
register unconditionally. I'll update the patch accordingly.

-- 
Regards,

Laurent Pinchart

[PATCH 09/19] mmc: sh_mmcif: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/mmc/host/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 51957d4..1f3a0c1 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -588,7 +588,7 @@ config MMC_DW_PCI
 
 config MMC_SH_MMCIF
 	tristate "SuperH Internal MMCIF support"
-	depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE)
+	depends on MMC_BLOCK && (SUPERH || ARM)
 	help
 	  This selects the MMC Host Interface controller (MMCIF).
 
-- 
1.8.1.5

[PATCH 10/19] mtd: sh_flctl: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/mtd/nand/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index d885298..f491f5b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -486,7 +486,7 @@ config MTD_NAND_MXC
 
 config MTD_NAND_SH_FLCTL
 	tristate "Support for NAND on Renesas SuperH FLCTL"
-	depends on SUPERH || ARCH_SHMOBILE
+	depends on SUPERH || ARM
 	help
 	  Several Renesas SuperH CPU has FLCTL. This option enables support
 	  for NAND Flash using FLCTL.
-- 
1.8.1.5

[PATCH 11/19] net: sh_eth: Set receive alignment correctly on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Configure the
receive alignement correctly on all ARM platforms to enable the driver
on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/net/ethernet/renesas/sh_eth.c | 2 +-
 drivers/net/ethernet/renesas/sh_eth.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index b57c278..990fd5b 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -809,7 +809,7 @@ out:
 	return ret;
 }
 
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARM)
 static void sh_eth_set_receive_align(struct sk_buff *skb)
 {
 	int reserve;
diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h
index a0db02c..41509f7 100644
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -165,7 +165,7 @@ enum {
 };
 
 /* Driver's parameters */
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARM)
 #define SH4_SKB_RX_ALIGN	32
 #else
 #define SH2_SH3_SKB_RX_ALIGN	2
-- 
1.8.1.5

[PATCH 12/19] irda: sh_irda: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/net/irda/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 2a30193..54b4101 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -403,7 +403,7 @@ config MCS_FIR
 
 config SH_IRDA
 	tristate "SuperH IrDA driver"
-	depends on IRDA && ARCH_SHMOBILE
+	depends on IRDA && ARM
 	help
 	  Say Y here if your want to enable SuperH IrDA devices.
 
-- 
1.8.1.5

[PATCH 13/19] pinctrl: sh-pfc: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/pinctrl/Makefile       | 2 +-
 drivers/pinctrl/sh-pfc/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 496d9bf..bef5a9f 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -56,7 +56,7 @@ obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_VF610)	+= pinctrl-vf610.o
 
 obj-$(CONFIG_PLAT_ORION)        += mvebu/
-obj-$(CONFIG_ARCH_SHMOBILE)	+= sh-pfc/
+obj-$(CONFIG_ARM)		+= sh-pfc/
 obj-$(CONFIG_SUPERH)		+= sh-pfc/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
 obj-$(CONFIG_ARCH_VT8500)	+= vt8500/
diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index 636a882..1d6182e 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -2,7 +2,7 @@
 # Renesas SH and SH Mobile PINCTRL drivers
 #
 
-if ARCH_SHMOBILE || SUPERH
+if ARM || SUPERH
 
 config PINCTRL_SH_PFC
 	select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
-- 
1.8.1.5

[PATCH 14/19] pwm: pwm-renesas-tpu: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-pwm@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/pwm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 75840b5..d851fdb 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -130,7 +130,7 @@ config PWM_PXA
 
 config PWM_RENESAS_TPU
 	tristate "Renesas TPU PWM support"
-	depends on ARCH_SHMOBILE
+	depends on ARM
 	help
 	  This driver exposes the Timer Pulse Unit (TPU) PWM controller found
 	  in Renesas chips through the PWM API.
-- 
1.8.1.5

[PATCH 15/19] sh: intc: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/sh/intc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/sh/intc/Kconfig b/drivers/sh/intc/Kconfig
index a305731..9546a7a 100644
--- a/drivers/sh/intc/Kconfig
+++ b/drivers/sh/intc/Kconfig
@@ -6,7 +6,7 @@ comment "Interrupt controller options"
 
 config INTC_USERIMASK
 	bool "Userspace interrupt masking support"
-	depends on ARCH_SHMOBILE || (SUPERH && CPU_SH4A)
+	depends on ARM || (SUPERH && CPU_SH4A)
 	help
 	  This enables support for hardware-assisted userspace hardirq
 	  masking.
-- 
1.8.1.5

[PATCH 16/19] spi: sh_msiof: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/spi/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b9c53cc..a69b740 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -406,7 +406,7 @@ config SPI_SC18IS602
 
 config SPI_SH_MSIOF
 	tristate "SuperH MSIOF SPI controller"
-	depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+	depends on (SUPERH || ARM) && HAVE_CLK
 	select SPI_BITBANG
 	help
 	  SPI driver for SuperH and SH Mobile MSIOF blocks.
-- 
1.8.1.5

Re: [PATCH 16/19] spi: sh_msiof: Enable the driver on all ARM platforms

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 377 bytes --]

On Tue, Oct 29, 2013 at 12:47:04AM +0100, Laurent Pinchart wrote:

> Renesas ARM platforms are transitioning from single-platform to
> multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
> driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
> and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Why is this driver specific to ARM?

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 17/19] spi: sh_hspi: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI.

Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/spi/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index a69b740..ab98033 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -426,7 +426,7 @@ config SPI_SH_SCI
 
 config SPI_SH_HSPI
 	tristate "SuperH HSPI controller"
-	depends on ARCH_SHMOBILE || COMPILE_TEST
+	depends on ARM || COMPILE_TEST
 	help
 	  SPI driver for SuperH HSPI blocks.
 
-- 
1.8.1.5

[PATCH 18/19] thermal: rcar-thermal: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/thermal/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index dbfc390..a243bc0 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -121,7 +121,7 @@ config SPEAR_THERMAL
 
 config RCAR_THERMAL
 	tristate "Renesas R-Car thermal driver"
-	depends on ARCH_SHMOBILE
+	depends on ARM
 	help
 	  Enable this to plug the R-Car thermal sensor driver into the Linux
 	  thermal framework
-- 
1.8.1.5

[PATCH 19/19] fbdev: sh-mobile-lcdcfb: Enable the driver on all ARM platforms

[Laurent Pinchart]

Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI and increase build testing coverage.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/video/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 84b685f..681858e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -10,7 +10,7 @@ config HAVE_FB_ATMEL
 
 config SH_MIPI_DSI
 	tristate
-	depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+	depends on (SUPERH || ARM) && HAVE_CLK
 
 config SH_LCD_MIPI_DSI
 	bool
@@ -1995,7 +1995,7 @@ config FB_W100
 
 config FB_SH_MOBILE_LCDC
 	tristate "SuperH Mobile LCDC framebuffer support"
-	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+	depends on FB && (SUPERH || ARM) && HAVE_CLK
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
@@ -2482,7 +2482,7 @@ endif
 
 config FB_SH_MOBILE_MERAM
 	tristate "SuperH Mobile MERAM read ahead support"
-	depends on (SUPERH || ARCH_SHMOBILE)
+	depends on (SUPERH || ARM)
 	select GENERIC_ALLOCATOR
 	---help---
 	  Enable MERAM support for the SuperH controller.
-- 
1.8.1.5