* [PATCH v2 4/6] ARM: shmobile: r8a7791 dtsi: Add GPIO clocks
@ 2014-04-14 18:33 Geert Uytterhoeven
2014-04-16 13:33 ` Laurent Pinchart
0 siblings, 1 reply; 2+ messages in thread
From: Geert Uytterhoeven @ 2014-04-14 18:33 UTC (permalink / raw)
To: linux-sh
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- No changes
---
arch/arm/boot/dts/r8a7791.dtsi | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 44f03444ef74..81f27a35b19f 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -76,6 +76,7 @@
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
};
gpio1: gpio@e6051000 {
@@ -87,6 +88,7 @@
gpio-ranges = <&pfc 0 32 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
};
gpio2: gpio@e6052000 {
@@ -98,6 +100,7 @@
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
};
gpio3: gpio@e6053000 {
@@ -109,6 +112,7 @@
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
};
gpio4: gpio@e6054000 {
@@ -120,6 +124,7 @@
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
};
gpio5: gpio@e6055000 {
@@ -131,6 +136,7 @@
gpio-ranges = <&pfc 0 160 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
};
gpio6: gpio@e6055400 {
@@ -142,6 +148,7 @@
gpio-ranges = <&pfc 0 192 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
};
gpio7: gpio@e6055800 {
@@ -153,6 +160,7 @@
gpio-ranges = <&pfc 0 224 26>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
};
thermal@e61f0000 {
@@ -805,18 +813,23 @@
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
+ clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
<&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
<&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
+ R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
+ R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
>;
clock-output-names - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3",
- "i2c2", "i2c1", "i2c0";
+ "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
+ "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2",
+ "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
--
1.7.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH v2 4/6] ARM: shmobile: r8a7791 dtsi: Add GPIO clocks
2014-04-14 18:33 [PATCH v2 4/6] ARM: shmobile: r8a7791 dtsi: Add GPIO clocks Geert Uytterhoeven
@ 2014-04-16 13:33 ` Laurent Pinchart
0 siblings, 0 replies; 2+ messages in thread
From: Laurent Pinchart @ 2014-04-16 13:33 UTC (permalink / raw)
To: linux-sh
Hi Geert,
Thank you for the patch.
On Monday 14 April 2014 20:33:15 Geert Uytterhoeven wrote:
> From: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> v2:
> - No changes
> ---
> arch/arm/boot/dts/r8a7791.dtsi | 19 ++++++++++++++++---
> 1 file changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
> index 44f03444ef74..81f27a35b19f 100644
> --- a/arch/arm/boot/dts/r8a7791.dtsi
> +++ b/arch/arm/boot/dts/r8a7791.dtsi
> @@ -76,6 +76,7 @@
> gpio-ranges = <&pfc 0 0 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
> };
>
> gpio1: gpio@e6051000 {
> @@ -87,6 +88,7 @@
> gpio-ranges = <&pfc 0 32 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
> };
>
> gpio2: gpio@e6052000 {
> @@ -98,6 +100,7 @@
> gpio-ranges = <&pfc 0 64 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
> };
>
> gpio3: gpio@e6053000 {
> @@ -109,6 +112,7 @@
> gpio-ranges = <&pfc 0 96 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
> };
>
> gpio4: gpio@e6054000 {
> @@ -120,6 +124,7 @@
> gpio-ranges = <&pfc 0 128 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
> };
>
> gpio5: gpio@e6055000 {
> @@ -131,6 +136,7 @@
> gpio-ranges = <&pfc 0 160 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
> };
>
> gpio6: gpio@e6055400 {
> @@ -142,6 +148,7 @@
> gpio-ranges = <&pfc 0 192 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
> };
>
> gpio7: gpio@e6055800 {
> @@ -153,6 +160,7 @@
> gpio-ranges = <&pfc 0 224 26>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
> };
>
> thermal@e61f0000 {
> @@ -805,18 +813,23 @@
> mstp9_clks: mstp9_clks@e6150994 {
> compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-
clocks";
> reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
> - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>,
<&hp_clk>,
> + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
> + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
> + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>,
<&hp_clk>,
> <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
> <&hp_clk>, <&hp_clk>;
> #clock-cells = <1>;
> renesas,clock-indices = <
> + R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5
R8A7791_CLK_GPIO4
> + R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1
> R8A7791_CLK_GPIO0 R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD
> R8A7791_CLK_I2C5 R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3
> R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
>
> >;
>
> clock-output-names > - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3",
> - "i2c2", "i2c1", "i2c0";
> + "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
"gpio1", "gpio0",
> + "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3",
"i2c2",
> + "i2c1", "i2c0";
I wouldn't have reflowed the existing lines though, but that's a minor detail.
> };
> mstp11_clks: mstp11_clks@e615099c {
> compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-
clocks";
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-04-16 13:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-14 18:33 [PATCH v2 4/6] ARM: shmobile: r8a7791 dtsi: Add GPIO clocks Geert Uytterhoeven
2014-04-16 13:33 ` Laurent Pinchart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).