From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Date: Sat, 06 Jan 2018 09:24:32 +0000 Subject: Re: [PATCH 2/2] SolutionEngine771x: add Ether TSU resource Message-Id: <405370a2-d421-be13-c051-ac972d083d95@cogentembedded.com> List-Id: References: <20180103201137.255228853@cogentembedded.com> In-Reply-To: <20180103201137.255228853@cogentembedded.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Yoshinori Sato , Rich Felker , linux-sh@vger.kernel.org Cc: netdev@vger.kernel.org Hello! On 1/3/2018 11:08 PM, Sergei Shtylyov wrote: > After the Ether platform data is fixed, the driver probe() method would > still fail since the 'struct sh_eth_cpu_data' corresponding to SH771x > indicates the presence of TSU but the memory resource for it is absent. > Add the missing TSU resource to both Ether devices and fix the harmless > off-by-one error in the main memory resources, while at it... > > Fixes: 4986b996882d ("net: sh_eth: remove the SH_TSU_ADDR") > Signed-off-by: Sergei Shtylyov > > --- > arch/sh/boards/mach-se/770x/setup.c | 14 ++++++++++++-- > arch/sh/include/mach-se/mach/se.h | 1 + > 2 files changed, 13 insertions(+), 2 deletions(-) > > Index: linux/arch/sh/boards/mach-se/770x/setup.c > =================================> --- linux.orig/arch/sh/boards/mach-se/770x/setup.c > +++ linux/arch/sh/boards/mach-se/770x/setup.c > @@ -123,10 +123,15 @@ static struct sh_eth_plat_data sh_eth_pl > static struct resource sh_eth0_resources[] = { > [0] = { > .start = SH_ETH0_BASE, > - .end = SH_ETH0_BASE + 0x1B8, > + .end = SH_ETH0_BASE + 0x1B8 - 1, > .flags = IORESOURCE_MEM, > }, > [1] = { > + .start = SH_TSU_BASE, > + .end = SH_TSU_BASE + 0xA00 - 1, Oops, should be 0x200, not 0xA00. > + .flags = IORESOURCE_MEM, > + }, > + [2] = { > .start = SH_ETH0_IRQ, > .end = SH_ETH0_IRQ, > .flags = IORESOURCE_IRQ, > @@ -146,10 +151,15 @@ static struct platform_device sh_eth0_de > static struct resource sh_eth1_resources[] = { > [0] = { > .start = SH_ETH1_BASE, > - .end = SH_ETH1_BASE + 0x1B8, > + .end = SH_ETH1_BASE + 0x1B8 - 1, > .flags = IORESOURCE_MEM, > }, > [1] = { > + .start = SH_TSU_BASE, > + .end = SH_TSU_BASE + 0xA00 - 1, Same here. I''ll repost... > + .flags = IORESOURCE_MEM, > + }, > + [2] = { > .start = SH_ETH1_IRQ, MBR, Sergei