From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Yoshii Date: Mon, 04 Aug 2008 05:28:38 +0000 Subject: [PATCH] add addrespace definition for sh2a. Message-Id: <48969386.4050705@renesas.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org Newfile: arch/sh/include/cpu-sh2a/cpu/addrspace.h This file seems had be removed to use fallback (cpu-common/cpu/addrspace.h), but, I'd like to add sh2a specific file here, because 1. the values defined there are not suitable for sh2a. 2. I don't think there is "common" definition for these values. Values are chosen by consideration of followings... P1 is 0. perhaps no question. P2 is from hardware manual, which says no-cache area starts at 20000000. It means that P? space size 000000. P3 is P2+size since asm/ptrace.h uses P3 as a end of P2. P4 is P3+size since asm/fixup.h uses P4 as a end of P3. Signed-off-by: Takashi YOSHII --- arch/sh/include/cpu-sh2a/cpu/addrspace.h | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-) create mode 100644 arch/sh/include/cpu-sh2a/cpu/addrspace.h diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h new file mode 100644 index 0000000..31eb4b5 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H +#define __ASM_SH_CPU_SH2A_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x00000000 +#define P2SEG 0x20000000 +#define P3SEG 0x40000000 +#define P4SEG 0x60000000 + +#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ -- 1.5.4.5