From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 3/3] smsc911x: convert rsk7203 platform to use smsc911x
Date: Fri, 14 Nov 2008 06:37:19 +0000 [thread overview]
Message-ID: <491D1C9F.6060302@renesas.com> (raw)
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
---
arch/sh/boards/board-rsk7203.c | 23 ++++++++++++-----------
arch/sh/configs/rsk7203_defconfig | 21 +++++++++++++++++++--
2 files changed, 31 insertions(+), 13 deletions(-)
diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c
index 58266f0..8446bf4 100644
--- a/arch/sh/boards/board-rsk7203.c
+++ b/arch/sh/boards/board-rsk7203.c
@@ -15,19 +15,20 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/map.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include <cpu/sh7203.h>
-static struct smc911x_platdata smc911x_info = {
- .flags = SMC911X_USE_16BIT,
- .irq_flags = IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
};
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
[0] = {
.start = 0x24000000,
.end = 0x24000000 + 0x100,
@@ -40,13 +41,13 @@ static struct resource smc911x_resources[] = {
},
};
-static struct platform_device smc911x_device = {
- .name = "smc911x",
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
.id = -1,
- .num_resources = ARRAY_SIZE(smc911x_resources),
- .resource = smc911x_resources,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
.dev = {
- .platform_data = &smc911x_info,
+ .platform_data = &smsc911x_config,
},
};
@@ -154,7 +155,7 @@ static struct platform_device led_device = {
};
static struct platform_device *rsk7203_devices[] __initdata = {
- &smc911x_device,
+ &smsc911x_device,
&flash_device,
&led_device,
};
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 85b0ac4..c48ddcb 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -496,13 +496,30 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
--
1.5.6.5
reply other threads:[~2008-11-14 6:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=491D1C9F.6060302@renesas.com \
--to=iwamatsu.nobuhiro@renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox