From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH] usb: add support R8A66597 peripheral controller driver
Date: Thu, 20 Aug 2009 07:01:06 +0000 [thread overview]
Message-ID: <4A8CF4B2.9090000@renesas.com> (raw)
In-Reply-To: <4A8B86BB.1020605@renesas.com>
Alan Stern wrote:
> On Wed, 19 Aug 2009, Yoshihiro Shimoda wrote:
>
>> The R8A66597 is Renesas USB 2.0 host and peripheral controller.
>> This controller supports USB High-speed. This driver supports
>> peripheral side.
>
>> +static struct usb_ep_ops r8a66597_ep_ops = {
>> + .enable = r8a66597_enable,
>> + .disable = r8a66597_disable,
>> +
>> + .alloc_request = r8a66597_alloc_request,
>> + .free_request = r8a66597_free_request,
>> +
>> + .queue = r8a66597_queue,
>> + .dequeue = r8a66597_dequeue,
>> +
>> + .set_halt = r8a66597_set_halt,
>> + .fifo_flush = r8a66597_fifo_flush,
>> +};
>
> All new peripheral controller drivers should implement the set_wedge
> method.
Thank you very much for your comment!
I made a new patch of implement the set_wedge method.
Would you check this patch?
Best regards,
Yoshihiro Shimoda
---
Subject: [PATCH] usb: r8a66597-udc: implement the set_wedge method
fix the problem that MSC Tests of USBCV detects some warnings.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
---
drivers/usb/gadget/r8a66597-udc.c | 28 ++++++++++++++++++++++++++--
drivers/usb/gadget/r8a66597-udc.h | 1 +
2 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 1e3e638..473e03e 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -974,8 +974,13 @@ static void clear_feature(struct r8a66597 *r8a66597,
u16 w_index = le16_to_cpu(ctrl->wIndex);
ep = r8a66597->epaddr2ep[w_index & USB_ENDPOINT_NUMBER_MASK];
- pipe_stop(r8a66597, ep->pipenum);
- control_reg_sqclr(r8a66597, ep->pipenum);
+ if (!ep->wedge) {
+ pipe_stop(r8a66597, ep->pipenum);
+ control_reg_sqclr(r8a66597, ep->pipenum);
+ spin_unlock(&r8a66597->lock);
+ usb_ep_clear_halt(&ep->ep);
+ spin_lock(&r8a66597->lock);
+ }
control_end(r8a66597, 1);
@@ -1348,6 +1353,7 @@ static int r8a66597_set_halt(struct usb_ep *_ep, int value)
pipe_stall(ep->r8a66597, ep->pipenum);
} else {
ep->busy = 0;
+ ep->wedge = 0;
pipe_stop(ep->r8a66597, ep->pipenum);
}
@@ -1356,6 +1362,23 @@ out:
return ret;
}
+static int r8a66597_set_wedge(struct usb_ep *_ep)
+{
+ struct r8a66597_ep *ep;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct r8a66597_ep, ep);
+
+ if (!ep || !ep->desc)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->r8a66597->lock, flags);
+ ep->wedge = 1;
+ spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
+
+ return usb_ep_set_halt(_ep);
+}
+
static void r8a66597_fifo_flush(struct usb_ep *_ep)
{
struct r8a66597_ep *ep;
@@ -1381,6 +1404,7 @@ static struct usb_ep_ops r8a66597_ep_ops = {
.dequeue = r8a66597_dequeue,
.set_halt = r8a66597_set_halt,
+ .set_wedge = r8a66597_set_wedge,
.fifo_flush = r8a66597_fifo_flush,
};
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 7d9a325..3ff922c 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -73,6 +73,7 @@ struct r8a66597_ep {
struct list_head queue;
unsigned busy:1;
+ unsigned wedge:1;
unsigned internal_ccpl:1; /* use only control */
/* this member can able to after r8a66597_enable */
--
1.5.5
next prev parent reply other threads:[~2009-08-20 7:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-19 4:59 [PATCH] usb: add support R8A66597 peripheral controller driver Yoshihiro Shimoda
2009-08-19 10:22 ` Magnus Damm
2009-08-19 14:14 ` Greg KH
2009-08-19 14:44 ` Alan Stern
2009-08-20 1:49 ` Paul Mundt
2009-08-20 7:01 ` Yoshihiro Shimoda [this message]
2009-08-20 14:18 ` Alan Stern
2009-08-20 23:44 ` Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A8CF4B2.9090000@renesas.com \
--to=shimoda.yoshihiro@renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox