linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yusuke Goda <yusuke.goda.sx@renesas.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] ARM: mach-shmobile: mackerel: Add support get_cd in CN23
Date: Fri, 07 Jan 2011 09:48:36 +0000	[thread overview]
Message-ID: <4D26E174.9050302@renesas.com> (raw)
In-Reply-To: <w3p7hfw4po7.wl%kuninori.morimoto.gx@renesas.com>

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
---
 arch/arm/mach-shmobile/board-mackerel.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 42f7c0d..bea5320 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -524,6 +524,15 @@ static struct platform_device sdhi1_device = {
 };
 #endif

+/*
+ * The card detect pin of the top SD/MMC slot (CN23) is active low and is
+ * connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162).
+ */
+static int slot_cn23_get_cd(struct platform_device *pdev)
+{
+	return !gpio_get_value(GPIO_PORT162);
+}
+
 /* SDHI2 */
 static struct sh_mobile_sdhi_info sdhi2_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI2_TX,
@@ -531,6 +540,7 @@ static struct sh_mobile_sdhi_info sdhi2_info = {
 	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED |
 			  MMC_CAP_NEEDS_POLL,
+	.get_cd		= slot_cn23_get_cd,
 };

 static struct resource sdhi2_resources[] = {
@@ -904,6 +914,10 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_SDHID2_1, NULL);
 	gpio_request(GPIO_FN_SDHID2_0, NULL);

+	/* card detect pin for microSD slot (CN23) */
+	gpio_request(GPIO_PORT162, NULL);
+	gpio_direction_input(GPIO_PORT162);
+
 	/* MMCIF */
 	gpio_request(GPIO_FN_MMCD0_0, NULL);
 	gpio_request(GPIO_FN_MMCD0_1, NULL);
-- 
1.5.6.5


  parent reply	other threads:[~2011-01-07  9:48 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-29  6:19 [PATCH] ARM: mach-shmobile: mackerel: Add lost GPIO_FN_LCDD 18 - 23 Kuninori Morimoto
2010-11-29  8:26 ` Paul Mundt
2010-11-30  4:37 ` [PATCH] ARM: mach-shmobile: mackerel: Add USB1(Host) support Kuninori Morimoto
2010-11-30  5:18 ` Paul Mundt
2010-11-30  6:52 ` [PATCH] ARM: mach-shmobile: mackerel: Add LEDs support Kuninori Morimoto
2010-12-01  0:31 ` [PATCH] ARM: mach-shmobile: mackerel: Add FSI-AK4643 support Kuninori Morimoto
2010-12-01  7:09 ` [PATCH] ARM: mach-shmobile: mackerel: Add LEDs support Paul Mundt
2010-12-07  9:12 ` [PATCH] ARM: mach-shmobile: mackerel: Add Accelerometer sensor support sim.chinyeow
2010-12-08  5:37 ` Paul Mundt
2010-12-09  1:55 ` [PATCH] ARM: mach-shmobile: mackerel: Add keypad tca6408a support chinyeow.sim.xt
2010-12-13  5:10 ` Paul Mundt
2010-12-14  5:18 ` [PATCH] ARM: mach-shmobile: mackerel: Add sdhi support Yusuke Goda
2010-12-14  9:50 ` Paul Mundt
2010-12-15  4:08 ` [PATCH] ARM: mach-shmobile: mackerel: Add mmcif support Yusuke Goda
2010-12-15  6:02 ` Paul Mundt
2010-12-15  6:40 ` Magnus Damm
2010-12-15  6:43 ` Magnus Damm
2010-12-15  7:35 ` Yusuke Goda
2010-12-15  7:39 ` Magnus Damm
2010-12-15  7:59 ` Yusuke Goda
2010-12-20  1:06 ` [PATCH] ARM: mach-shmobile: mackerel: Add GPS support Yusuke Goda
2010-12-20 16:15 ` Paul Mundt
2010-12-23  6:36 ` [PATCH] ARM: mach-shmobile: mackerel: Add sdhi support Simon Horman
2011-01-07  9:48 ` Yusuke Goda [this message]
2011-01-11  0:47 ` [PATCH] ARM: mach-shmobile: mackerel: Add touchscreen ST1232 support chinyeow.sim.xt
2011-01-11  3:53 ` [PATCH] ARM: mach-shmobile: mackerel: Add support get_cd in CN23 Paul Mundt
2011-01-11  3:57 ` [PATCH] ARM: mach-shmobile: mackerel: Add touchscreen ST1232 support Paul Mundt
2011-01-11  9:27 ` [PATCH] ARM: mach-shmobile: mackerel: Add sdhi support Yusuke Goda
2011-01-11 22:48 ` Simon Horman
2012-01-19  0:37 ` [PATCH] ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment Kuninori Morimoto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D26E174.9050302@renesas.com \
    --to=yusuke.goda.sx@renesas.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).