From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: fix the value of sh_dmae_slave_config in setup-sh7757
Date: Wed, 29 Jun 2011 04:23:42 +0000 [thread overview]
Message-ID: <4E0AA8CE.1020205@renesas.com> (raw)
Fix the value of chcr for SCIF[2-4]_RX and RIIC[0-9]_RX and
the value of mid_rid for some RIIC.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 32 ++++++++++++++++----------------
1 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index 717a76b..6eba96b 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -183,7 +183,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
{
.slave_id = SHDMA_SLAVE_SCIF2_RX,
.addr = 0x1f4b0014,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
},
@@ -197,7 +197,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
{
.slave_id = SHDMA_SLAVE_SCIF3_RX,
.addr = 0x1f4c0014,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
},
@@ -211,7 +211,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
{
.slave_id = SHDMA_SLAVE_SCIF4_RX,
.addr = 0x1f4d0014,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x42,
},
@@ -228,7 +228,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC0_RX,
.addr = 0x1e500013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
},
@@ -242,7 +242,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC1_RX,
.addr = 0x1e510013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
},
@@ -256,7 +256,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC2_RX,
.addr = 0x1e520013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xa2,
},
@@ -265,12 +265,12 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
.addr = 0x1e530012,
.chcr = SM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xab,
+ .mid_rid = 0xa9,
},
{
.slave_id = SHDMA_SLAVE_RIIC3_RX,
.addr = 0x1e530013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xaf,
},
@@ -279,14 +279,14 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
.addr = 0x1e540012,
.chcr = SM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc1,
+ .mid_rid = 0xc5,
},
{
.slave_id = SHDMA_SLAVE_RIIC4_RX,
.addr = 0x1e540013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc2,
+ .mid_rid = 0xc6,
},
};
@@ -301,7 +301,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC5_RX,
.addr = 0x1e550013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
},
@@ -315,7 +315,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC6_RX,
.addr = 0x1e560013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
},
@@ -329,7 +329,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC7_RX,
.addr = 0x1e570013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x42,
},
@@ -343,7 +343,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC8_RX,
.addr = 0x1e580013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x46,
},
@@ -357,7 +357,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
{
.slave_id = SHDMA_SLAVE_RIIC9_RX,
.addr = 0x1e590013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x52,
},
--
1.7.1
next reply other threads:[~2011-06-29 4:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-29 4:23 Yoshihiro Shimoda [this message]
2011-06-29 8:39 ` [PATCH] sh: fix the value of sh_dmae_slave_config in setup-sh7757 Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E0AA8CE.1020205@renesas.com \
--to=yoshihiro.shimoda.uh@renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox