From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH v2 1/3] dmaengine: shdma: modify the DMAC Address Error
Date: Tue, 10 Jan 2012 05:20:16 +0000 [thread overview]
Message-ID: <4F0BCA90.3050508@renesas.com> (raw)
The USB-DMAC/SUDMAC don't have the interrupt of DMAC Address Error.
So, only when the resource has a name and it is "error_irq", the driver
calls request_irq() for DMAC Address Error.
This patch is also useful for the generic DMAC which doesn't have
DMAC Address Error. So, we can get rid of the "CPU_SH4 || ARCH_SHMOBILE"
ifdefs.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
about v2:
- use a resource name for the registration.
- rid of the "CPU_SH4 || ARCH_SHMOBILE" ifdefs.
drivers/dma/shdma.c | 74 ++++++++++++++++++++++++++------------------------
1 files changed, 38 insertions(+), 36 deletions(-)
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index 81809c2..4fff02b 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -1151,10 +1151,10 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
struct sh_dmae_pdata *pdata = pdev->dev.platform_data;
unsigned long irqflags = IRQF_DISABLED,
chan_flag[SH_DMAC_MAX_CHANNELS] = {};
- int errirq, chan_irq[SH_DMAC_MAX_CHANNELS];
+ int errirq = 0, chan_irq[SH_DMAC_MAX_CHANNELS];
int err, i, irq_cnt = 0, irqres = 0, irq_cap = 0;
struct sh_dmae_device *shdev;
- struct resource *chan, *dmars, *errirq_res, *chanirq_res;
+ struct resource *chan, *dmars, *errirq_res, *irq_res, *chanirq_res;
/* get platform data */
if (!pdata || !pdata->channel_num)
@@ -1179,8 +1179,8 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
* specify IORESOURCE_IRQ_SHAREABLE in their resources, they will be
* requested with the IRQF_SHARED flag
*/
- errirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!chan || !errirq_res)
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!chan || !irq_res)
return -ENODEV;
if (!request_mem_region(chan->start, resource_size(chan), pdev->name)) {
@@ -1258,33 +1258,35 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
/* Default transfer size of 32 bytes requires 32-byte alignment */
shdev->common.copy_align = LOG2_DEFAULT_XFER_SIZE;
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
- chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-
- if (!chanirq_res)
- chanirq_res = errirq_res;
- else
- irqres++;
-
- if (chanirq_res = errirq_res ||
- (errirq_res->flags & IORESOURCE_BITS) = IORESOURCE_IRQ_SHAREABLE)
- irqflags = IRQF_SHARED;
-
- errirq = errirq_res->start;
-
- err = request_irq(errirq, sh_dmae_err, irqflags,
- "DMAC Address Error", shdev);
- if (err) {
- dev_err(&pdev->dev,
- "DMA failed requesting irq #%d, error %d\n",
- errirq, err);
- goto eirq_err;
+ errirq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ "error_irq");
+ if (errirq_res) {
+ chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+
+ if (!chanirq_res)
+ chanirq_res = errirq_res;
+ else
+ irqres++;
+
+ if (chanirq_res = errirq_res ||
+ (errirq_res->flags & IORESOURCE_BITS) =
+ IORESOURCE_IRQ_SHAREABLE)
+ irqflags = IRQF_SHARED;
+
+ errirq = errirq_res->start;
+
+ err = request_irq(errirq, sh_dmae_err, irqflags,
+ "DMAC Address Error", shdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "DMA failed requesting irq #%d, error %d\n",
+ errirq, err);
+ goto eirq_err;
+ }
+ } else {
+ chanirq_res = irq_res;
}
-#else
- chanirq_res = errirq_res;
-#endif /* CONFIG_CPU_SH4 || CONFIG_ARCH_SHMOBILE */
-
if (chanirq_res->start = chanirq_res->end &&
!platform_get_resource(pdev, IORESOURCE_IRQ, 1)) {
/* Special case - all multiplexed */
@@ -1305,7 +1307,7 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
break;
}
- if ((errirq_res->flags & IORESOURCE_BITS) =
+ if ((irq_res->flags & IORESOURCE_BITS) =
IORESOURCE_IRQ_SHAREABLE)
chan_flag[irq_cnt] = IRQF_SHARED;
else
@@ -1345,10 +1347,9 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
chan_probe_err:
sh_dmae_chan_remove(shdev);
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
- free_irq(errirq, shdev);
+ if (errirq_res)
+ free_irq(errirq, shdev);
eirq_err:
-#endif
rst_err:
spin_lock_irq(&sh_dmae_lock);
list_del_rcu(&shdev->node);
@@ -1379,12 +1380,13 @@ static int __exit sh_dmae_remove(struct platform_device *pdev)
{
struct sh_dmae_device *shdev = platform_get_drvdata(pdev);
struct resource *res;
- int errirq = platform_get_irq(pdev, 0);
+ struct resource *errirq_res = platform_get_resource_byname(pdev,
+ IORESOURCE_IRQ, "error_irq");
dma_async_device_unregister(&shdev->common);
- if (errirq > 0)
- free_irq(errirq, shdev);
+ if (errirq_res)
+ free_irq(errirq_res->start, shdev);
spin_lock_irq(&sh_dmae_lock);
list_del_rcu(&shdev->node);
--
1.7.1
next reply other threads:[~2012-01-10 5:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-10 5:20 Shimoda, Yoshihiro [this message]
2012-01-10 5:33 ` [PATCH v2 1/3] dmaengine: shdma: modify the DMAC Address Error registration Paul Mundt
2012-01-10 5:56 ` [PATCH v2 1/3] dmaengine: shdma: modify the DMAC Address Error Shimoda, Yoshihiro
2012-01-10 6:01 ` [PATCH v2 1/3] dmaengine: shdma: modify the DMAC Address Error registration Paul Mundt
2012-01-10 6:19 ` [PATCH v2 1/3] dmaengine: shdma: modify the DMAC Address Error Shimoda, Yoshihiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F0BCA90.3050508@renesas.com \
--to=yoshihiro.shimoda.uh@renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).