linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linux-media@vger.kernel.org, hverkuil@xs4all.nl
Cc: mchehab@redhat.com, vladimir.barinov@cogentembedded.com,
	linux-sh@vger.kernel.org
Subject: Re: [PATCH v3] adv7180: add more subdev video ops
Date: Mon, 20 May 2013 20:20:02 +0000	[thread overview]
Message-ID: <519A8572.7050700@cogentembedded.com> (raw)
In-Reply-To: <201305132321.39495.sergei.shtylyov@cogentembedded.com>

Hello.

On 05/13/2013 11:21 PM, Sergei Shtylyov wrote:

> From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
>
> Add subdev video ops for ADV7180 video decoder.  This makes decoder usable on
> the soc-camera drivers.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

     Hans, what's your opinion of this version? Mauro said I should ask 
you first...

> ---
> This patch is against the 'media_tree.git' repo.
>
> Changes from version 2:
> - set the field format depending on video standard in try_mbus_fmt() method;
> - removed querystd() method calls from try_mbus_fmt() and cropcap() methods;
> - removed g_crop() method.
>
>   drivers/media/i2c/adv7180.c |   86 ++++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 86 insertions(+)
>
> Index: media_tree/drivers/media/i2c/adv7180.c
> =================================> --- media_tree.orig/drivers/media/i2c/adv7180.c
> +++ media_tree/drivers/media/i2c/adv7180.c
> @@ -1,6 +1,8 @@
>   /*
>    * adv7180.c Analog Devices ADV7180 video decoder driver
>    * Copyright (c) 2009 Intel Corporation
> + * Copyright (C) 2013 Cogent Embedded, Inc.
> + * Copyright (C) 2013 Renesas Solutions Corp.
>    *
>    * This program is free software; you can redistribute it and/or modify
>    * it under the terms of the GNU General Public License version 2 as
> @@ -128,6 +130,7 @@ struct adv7180_state {
>   	v4l2_std_id		curr_norm;
>   	bool			autodetect;
>   	u8			input;
> +	struct v4l2_mbus_framefmt fmt;
>   };
>   #define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler,		\
>   					    struct adv7180_state,	\
> @@ -397,10 +400,93 @@ static void adv7180_exit_controls(struct
>   	v4l2_ctrl_handler_free(&state->ctrl_hdl);
>   }
>   
> +static int adv7180_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index,
> +				 enum v4l2_mbus_pixelcode *code)
> +{
> +	if (index > 0)
> +		return -EINVAL;
> +
> +	*code = V4L2_MBUS_FMT_YUYV8_2X8;
> +
> +	return 0;
> +}
> +
> +static int adv7180_try_mbus_fmt(struct v4l2_subdev *sd,
> +				struct v4l2_mbus_framefmt *fmt)
> +{
> +	struct adv7180_state *state = to_state(sd);
> +
> +	fmt->code = V4L2_MBUS_FMT_YUYV8_2X8;
> +	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
> +	fmt->field = state->curr_norm & V4L2_STD_525_60 ?
> +		     V4L2_FIELD_INTERLACED_BT : V4L2_FIELD_INTERLACED_TB;
> +	fmt->width = 720;
> +	fmt->height = state->curr_norm & V4L2_STD_525_60 ? 480 : 576;
> +
> +	return 0;
> +}
> +
> +static int adv7180_g_mbus_fmt(struct v4l2_subdev *sd,
> +			      struct v4l2_mbus_framefmt *fmt)
> +{
> +	struct adv7180_state *state = to_state(sd);
> +
> +	*fmt = state->fmt;
> +
> +	return 0;
> +}
> +
> +static int adv7180_s_mbus_fmt(struct v4l2_subdev *sd,
> +			      struct v4l2_mbus_framefmt *fmt)
> +{
> +	struct adv7180_state *state = to_state(sd);
> +
> +	adv7180_try_mbus_fmt(sd, fmt);
> +	state->fmt = *fmt;
> +
> +	return 0;
> +}
> +
> +static int adv7180_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
> +{
> +	struct adv7180_state *state = to_state(sd);
> +
> +	a->bounds.left = 0;
> +	a->bounds.top = 0;
> +	a->bounds.width = 720;
> +	a->bounds.height = state->curr_norm & V4L2_STD_525_60 ? 480 : 576;
> +	a->defrect = a->bounds;
> +	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	a->pixelaspect.numerator = 1;
> +	a->pixelaspect.denominator = 1;
> +
> +	return 0;
> +}
> +
> +static int adv7180_g_mbus_config(struct v4l2_subdev *sd,
> +				 struct v4l2_mbus_config *cfg)
> +{
> +	/*
> +	 * The ADV7180 sensor supports BT.601/656 output modes.
> +	 * The BT.656 is default and not yet configurable by s/w.
> +	 */
> +	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
> +		     V4L2_MBUS_DATA_ACTIVE_HIGH;
> +	cfg->type = V4L2_MBUS_BT656;
> +
> +	return 0;
> +}
> +
>   static const struct v4l2_subdev_video_ops adv7180_video_ops = {
>   	.querystd = adv7180_querystd,
>   	.g_input_status = adv7180_g_input_status,
>   	.s_routing = adv7180_s_routing,
> +	.enum_mbus_fmt = adv7180_enum_mbus_fmt,
> +	.try_mbus_fmt = adv7180_try_mbus_fmt,
> +	.g_mbus_fmt = adv7180_g_mbus_fmt,
> +	.s_mbus_fmt = adv7180_s_mbus_fmt,
> +	.cropcap = adv7180_cropcap,
> +	.g_mbus_config = adv7180_g_mbus_config,
>   };
>   
>   static const struct v4l2_subdev_core_ops adv7180_core_ops = {

WBR, Sergei


  reply	other threads:[~2013-05-20 20:20 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-13 19:21 [PATCH v3] adv7180: add more subdev video ops Sergei Shtylyov
2013-05-20 20:20 ` Sergei Shtylyov [this message]
2013-05-21  9:28 ` Hans Verkuil
2013-05-21  9:35 ` Hans Verkuil
2013-05-21 14:28   ` Sergei Shtylyov
2013-05-21 14:45     ` Hans Verkuil
2013-05-21 17:17       ` Sergei Shtylyov
2013-05-22  6:55         ` Hans Verkuil
2013-05-22 12:23           ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=519A8572.7050700@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=mchehab@redhat.com \
    --cc=vladimir.barinov@cogentembedded.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).