From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Date: Wed, 22 May 2013 14:19:28 +0000 Subject: Re: [PATCH FOR v3.10 v2] ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80 Message-Id: <519CD3F0.7050002@cogentembedded.com> List-Id: References: <1369232020-22681-1-git-send-email-horms+renesas@verge.net.au> In-Reply-To: <1369232020-22681-1-git-send-email-horms+renesas@verge.net.au> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org On 22-05-2013 18:13, Simon Horman wrote: > Update the CMT clocksource rating from 125 to 80. > This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1 > introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp: > Avoid dummy clockevent being preferred over real"). > The patch noted above reduces the rating of dummy clockevent from 400 to 100. > This patch reduces the rating of CMT so that it is once again less than that > of the dummy clockevent. > Signed-off-by: Simon Horman > --- > I also plan to reduce the rating of the STI clocksource to less than 100. > However, as I am not aware of any problems relating to STI in v3.10-rc > my plan is to update STI in the v3.11 timeframe. > --- > arch/arm/mach-shmobile/setup-sh73a0.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) BTW, shouldn't the subject be "ARM: shmobile: sh73a0: Update CMT clocksource rating to 80"? WBR, Sergei