From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Date: Wed, 05 Jun 2013 20:43:55 +0000 Subject: Re: [RFC PATCH net-next v2 2/3] sh_eth: add support RMIIMODE register Message-Id: <51AFA30B.4080809@cogentembedded.com> List-Id: References: <1368499073-21975-1-git-send-email-horms+renesas@verge.net.au> <1368499073-21975-3-git-send-email-horms+renesas@verge.net.au> <519240C7.1060406@cogentembedded.com> <20130515005117.GC12246@verge.net.au> In-Reply-To: <20130515005117.GC12246@verge.net.au> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Simon Horman Cc: netdev@vger.kernel.org, linux-sh@vger.kernel.org, Magnus Damm Hello. On 05/15/2013 04:51 AM, Simon Horman wrote: >>> This change is motivated by the lager board which uses the r8a7790 SoC, >>> an R-Car SoC. For this board setting the RMIIMODE register is necessary. >>> This patch assumes this is valid for all R-Car SoCs. >> No, RMIIMODE register is not documented on R8A7778/9 SoCs and >> this location is described as reserved. How's it called in R8A7790 >> manual, CXR15? > It appears to be undocumented in the R8A7790 I have. Of the manuals I have now this register is only documented in R-Car H2 user's manual 0.50, > Empirically it seems necessary for the lager/R8A7790. The manual confirms that. > To be honest I am entirely unsure of its relevance to other SoCs. > > I wonder if a better approach would be to add a flag to platform > data rather than struct sh_eth_cpu_data. This would allow the register > to only be accessed on boards where it is known to be useful. No, this doesn't depend on the board, judging on the H2 manual. You just must write it to 1 on R-Car H2 in order for Ether to operate. > >>> Signed-off-by: Simon Horman >> WBR, Sergei