* EMMA/EMEV2 SDHCI driver
@ 2013-07-16 15:06 Ben Dooks
2013-07-16 16:09 ` Ben Dooks
2013-07-16 16:33 ` Ben Dooks
0 siblings, 2 replies; 3+ messages in thread
From: Ben Dooks @ 2013-07-16 15:06 UTC (permalink / raw)
To: linux-sh
I am currently trying to get a driver going for the SDIO0/1/2 blocks
in the EMEV2 device. Using the SDHCI platform driver I've added a
sub-driver to get the bus and sclks and then instantiate the sdhci
core.
I have checked that the device is out of reset, and that all clocks
in to the block are enabled. I have a quick verification that all
SDHCI writes are making it to the registers.
Has anyone tried this with any success? Is there something I have
missed doing this?
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: EMMA/EMEV2 SDHCI driver
2013-07-16 15:06 EMMA/EMEV2 SDHCI driver Ben Dooks
@ 2013-07-16 16:09 ` Ben Dooks
2013-07-16 16:33 ` Ben Dooks
1 sibling, 0 replies; 3+ messages in thread
From: Ben Dooks @ 2013-07-16 16:09 UTC (permalink / raw)
To: linux-sh
On 16/07/13 16:06, Ben Dooks wrote:
> I am currently trying to get a driver going for the SDIO0/1/2 blocks
> in the EMEV2 device. Using the SDHCI platform driver I've added a
> sub-driver to get the bus and sclks and then instantiate the sdhci
> core.
>
> I have checked that the device is out of reset, and that all clocks
> in to the block are enabled. I have a quick verification that all
> SDHCI writes are making it to the registers.
>
> Has anyone tried this with any success? Is there something I have
> missed doing this?
I'm pretty sure we are somehow losing the interrupt from the SDIO0
block to the gic, but can't see how as the interrupt seems to be
appropriately unmasked.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: EMMA/EMEV2 SDHCI driver
2013-07-16 15:06 EMMA/EMEV2 SDHCI driver Ben Dooks
2013-07-16 16:09 ` Ben Dooks
@ 2013-07-16 16:33 ` Ben Dooks
1 sibling, 0 replies; 3+ messages in thread
From: Ben Dooks @ 2013-07-16 16:33 UTC (permalink / raw)
To: linux-sh
On 16/07/13 17:09, Ben Dooks wrote:
> On 16/07/13 16:06, Ben Dooks wrote:
>> I am currently trying to get a driver going for the SDIO0/1/2 blocks
>> in the EMEV2 device. Using the SDHCI platform driver I've added a
>> sub-driver to get the bus and sclks and then instantiate the sdhci
>> core.
>>
>> I have checked that the device is out of reset, and that all clocks
>> in to the block are enabled. I have a quick verification that all
>> SDHCI writes are making it to the registers.
>>
>> Has anyone tried this with any success? Is there something I have
>> missed doing this?
>
> I'm pretty sure we are somehow losing the interrupt from the SDIO0
> block to the gic, but can't see how as the interrupt seems to be
> appropriately unmasked.
Argh, this is my only silly fault for adding debug into the sdhci
core code and failing to notice i'd broken the irq claim. It is now
generating interrupts!
I am now looking in to what quirks may or may not be needed as I
am seeing ADMA errors returned.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-07-16 16:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-07-16 15:06 EMMA/EMEV2 SDHCI driver Ben Dooks
2013-07-16 16:09 ` Ben Dooks
2013-07-16 16:33 ` Ben Dooks
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).