linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ben Dooks <ben.dooks@codethink.co.uk>
To: Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Ian Molton <ian.molton-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>,
	linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
	SH-Linux <linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH] EMMA: Add em i2c driver
Date: Thu, 29 Aug 2013 10:24:22 +0000	[thread overview]
Message-ID: <521F2156.6040506@codethink.co.uk> (raw)
In-Reply-To: <CANqRtoRK+Ur=87-me7CpP+s9SO5g0ZVZSEOrqwDf4HFfjZZmZA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>

On 29/08/13 06:33, Magnus Damm wrote:
> Hi Ian,
>
> Thanks for submitting this patch. I have one comment only, please see below.
>
> On Wed, Aug 28, 2013 at 8:21 PM, Ian Molton<ian.molton@codethink.co.uk>  wrote:
>> Signed-off-by: Ian Molton<ian.molton@codethink.co.uk>
>> ---
>>   drivers/i2c/busses/Kconfig  |   10 +
>>   drivers/i2c/busses/Makefile |    1 +
>>   drivers/i2c/busses/i2c-em.c |  536 +++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 547 insertions(+)
>>   create mode 100644 drivers/i2c/busses/i2c-em.c
>>
>> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>> index dc6dea6..e5cda34 100644
>> --- a/drivers/i2c/busses/Kconfig
>> +++ b/drivers/i2c/busses/Kconfig
>> @@ -777,6 +777,16 @@ config I2C_RCAR
>>            This driver can also be built as a module.  If so, the module
>>            will be called i2c-rcar.
>>
>> +config I2C_EM
>> +       tristate "EMMA Mobile series I2C adapter"
>> +       depends on I2C&&  HAVE_CLK
>> +       help
>> +         If you say yes to this option, support will be included for the
>> +         I2C interface on the Renesas Electronics EM/EV of processors.
>> +
>> +         This driver can also be built as a module.  If so, the module
>> +         will be called i2c-em
>> +
>>   comment "External I2C/SMBus adapter drivers"
>>
>>   config I2C_DIOLAN_U2C
>> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
>> index d00997f..f7022ab 100644
>> --- a/drivers/i2c/busses/Makefile
>> +++ b/drivers/i2c/busses/Makefile
>> @@ -76,6 +76,7 @@ obj-$(CONFIG_I2C_OCTEON)      += i2c-octeon.o
>>   obj-$(CONFIG_I2C_XILINX)       += i2c-xiic.o
>>   obj-$(CONFIG_I2C_XLR)          += i2c-xlr.o
>>   obj-$(CONFIG_I2C_RCAR)         += i2c-rcar.o
>> +obj-$(CONFIG_I2C_EM)            += i2c-em.o
>>
>>   # External I2C/SMBus adapter drivers
>>   obj-$(CONFIG_I2C_DIOLAN_U2C)   += i2c-diolan-u2c.o
>> diff --git a/drivers/i2c/busses/i2c-em.c b/drivers/i2c/busses/i2c-em.c
>> new file mode 100644
>> index 0000000..b54a983
>> --- /dev/null
>> +++ b/drivers/i2c/busses/i2c-em.c
>
>> +static int em_i2c_probe(struct platform_device *pdev)
>> +{
>> +       struct em_i2c_device *i2c_dev;
>> +       struct resource *r;
>> +       int ret;
>> +
>> +       i2c_dev = devm_kzalloc(&pdev->dev, sizeof(struct em_i2c_device),
>> +                               GFP_KERNEL);
>> +
>> +       r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +       i2c_dev->membase = devm_ioremap_resource(&pdev->dev, r);
>> +       if (IS_ERR(i2c_dev->membase))
>> +               return PTR_ERR(i2c_dev->membase);
>> +
>> +       strlcpy(i2c_dev->adap.name, "em_i2c", sizeof(i2c_dev->adap.name));
>> +
>> +       i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
>> +       if (!IS_ERR(i2c_dev->clk))
>> +               clk_prepare(i2c_dev->clk);
>> +
>> +       i2c_dev->sclk = devm_clk_get(&pdev->dev, "sclk");
>> +       if (!IS_ERR(i2c_dev->sclk))
>> +               clk_prepare(i2c_dev->sclk);
>> +
>> +       i2c_dev->irq = platform_get_irq(pdev, 0);
>> +       i2c_dev->adap.timeout = msecs_to_jiffies(100);
>> +       i2c_dev->adap.dev.parent =&pdev->dev;
>> +       i2c_dev->adap.algo =&em_i2c_algo;
>> +       i2c_dev->adap.owner = THIS_MODULE;
>> +       i2c_dev->adap.nr = pdev->id;
>> +       i2c_dev->adap.dev.of_node = pdev->dev.of_node;
>> +
>> +       init_waitqueue_head(&i2c_dev->i2c_wait);
>> +
>> +       spin_lock_init(&i2c_dev->irq_lock);
>> +
>> +       i2c_dev->flags = I2C_BIT_DFC0;
>> +#ifdef CONFIG_I2C_EMXX_SMC
>> +       i2c_dev->flags |= I2C_BIT_SMC0;
>> +#endif
>
> I think CONFIG_I2C_EMXX_SMC probably want to be reworked somehow. I
> assume it's an old left over in this particular case. But if you need
> to have some special configuration method then please consider some
> other way than CONFIG_ variables that are not very compatible with
> future multi-platform kernel images.

Is it something that needs to be passed through the device tree binding
or something we can detect from the SoC itself?

-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

  parent reply	other threads:[~2013-08-29 10:24 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1377688911-10911-1-git-send-email-ian.molton@codethink.co.uk>
2013-08-29  5:33 ` [PATCH] EMMA: Add em i2c driver Magnus Damm
     [not found]   ` <CANqRtoRK+Ur=87-me7CpP+s9SO5g0ZVZSEOrqwDf4HFfjZZmZA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-08-29 10:24     ` Ben Dooks [this message]
2013-08-29 13:35       ` Ian Molton
2013-09-03 11:30     ` EMMA I2C driver Ian Molton
2013-09-03 11:30       ` [PATCH] EMMA: Add em i2c driver Ian Molton
2013-09-03 12:56         ` Ben Dooks
     [not found]           ` <5225DC8E.7070001-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
2013-09-04 12:06             ` Thomas Petazzoni
     [not found] ` <1377688911-10911-1-git-send-email-ian.molton-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
2013-09-03 16:49   ` [Patch v3]EMMA I2C driver Ian Molton
2013-09-03 16:49     ` [PATCH 1/2] I2C: EMMA Mobile I2C master driver Ian Molton
2013-09-05  6:04       ` Simon Horman
2013-09-25  4:45         ` Simon Horman
2013-12-06 20:52           ` Ian Molton
2013-12-11  2:09             ` Simon Horman
2013-12-11 11:59               ` Wolfram Sang
2014-01-08 10:33                 ` Ian Molton
     [not found]       ` <1378226969-18722-2-git-send-email-ian.molton-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
2014-02-18 17:38         ` Wolfram Sang
2014-06-17  9:57           ` Wolfram Sang
2014-07-18 15:45             ` Wolfram Sang
2014-08-22  2:57               ` Wolfram Sang
2013-08-28 14:04 [PATCH] EMMA: Add em i2c driver y
2013-08-28 14:10 ` Ben Dooks
2013-08-28 15:08 ` Ian Molton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=521F2156.6040506@codethink.co.uk \
    --to=ben.dooks@codethink.co.uk \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=ian.molton-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).