From mboxrd@z Thu Jan 1 00:00:00 1970 From: Valentine Date: Thu, 19 Dec 2013 12:24:36 +0000 Subject: Re: [PATCH] arm: shmobile: r8a7790: Fix I2C controller names Message-Id: <52B2E584.4090508@cogentembedded.com> List-Id: References: <1387379302-20223-1-git-send-email-valentine.barshak@cogentembedded.com> In-Reply-To: <1387379302-20223-1-git-send-email-valentine.barshak@cogentembedded.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On 12/19/2013 12:58 PM, Simon Horman wrote: > On Wed, Dec 18, 2013 at 09:17:05PM -0800, Kuninori Morimoto wrote: >> >> Hi >> >>> The R8A7790 is an R-Car Gen2 SoC. The clock division factor >>> (CDF) width is 3 bits on Gen2 as opposed to 2 bits on Gen1. >>> Fix the device names for R8A7790 SoC to make the R-Car I2C >>> driver configure the hardware properly. >>> >>> Signed-off-by: Valentine Barshak >>> --- >> >> Grr... this is correct >> sorry my fault. >> >> Acked-by: Kuninori Morimoto >> >> Simon, this patch is based on below patch >> >> 043a3f113ce41e3e6fdbb49551df75e82e8c4ae7 >> (i2c: rcar: fixup rcar type naming) > > Thanks. > > Valentine could you please: > > 1. Rebase this on the fixes-for-v3.13 branch in the renesas tree and; > 2. Include something like this in the following. > > This resolves a regression which was introduced by > 043a3f113ce41e3 ("i2c: rcar: fixup rcar type naming") in v3.12-rc4. > Sure, I'll rebase, but I think the comment is not needed since the issue here is not really related to 043a3f113ce41e3. That patch changed the device name from "i2c-rcar_h2" to "i2c-rcar_gen2" in the driver, while the patch that adds i2c to the r8a7790 platform (b448c904f5058b6c "ARM: shmobile: r8a7790: add I2C support") uses a wrong ("i2c-rcar") name anyways. > Thanks. > Thanks, Val.