From mboxrd@z Thu Jan 1 00:00:00 1970 From: Valentine Date: Fri, 20 Dec 2013 14:07:46 +0000 Subject: Re: [PATCH 0/5] arm: shmobile: Lager Add USB and SATA support Message-Id: <52B44F32.80803@cogentembedded.com> List-Id: References: <1387370660-20481-1-git-send-email-valentine.barshak@cogentembedded.com> In-Reply-To: <1387370660-20481-1-git-send-email-valentine.barshak@cogentembedded.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-sh@vger.kernel.org On 12/18/2013 04:44 PM, Valentine Barshak wrote: > I've decided to bundle USB and SATA patches together, since I've done SAT= A on top of USB. > Most of the SATA/USBHS/PCI USB host support patches for Lager are availab= le in the respective > susbsystem git trees (for 3.14) but are still missing from the Renesas tr= ee. > > So, in order to test these, the following patches from other subsystem tr= ees are needed: > USB: > https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/commit/?h=3D= pci/host-rcar&id=FB178d8b2fab3f2a9f203c13ffe80cfd6e01bdf1 > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?i= d=C8ba8115a21226fba3211085f570b128fa271e31 > https://git.kernel.org/cgit/linux/kernel/git/balbi/usb.git/commit/?h=3Dne= xt&id=C3e5d2985ef720cbbdc63546a5c545ac4450d96e > https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=3Du= sb-next&id=103e127d1f8f985e8a662da6537ebc5e08902ee3 > https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=3Du= sb-next&id=1Ae5799ef63176cc75ec10e545cb65f620a82747 > > SATA: > https://git.kernel.org/cgit/linux/kernel/git/tj/libata.git/commit/?h=3Dfo= r-3.14&id=E67adb4e669db834c1f95cbdf99bb4e9ec8455b3 > > The USB channel 0 (CN6) is configured as PCI USB host if USB_RENESAS_USBH= S_UDC is disabled. > Otherwise it is configured as USBHS device. > Please note that the following switches have to be set correctly as well: > PCI USB Host: SW5 - pin1; SW6 - pin1 > USBHS device: SW5 - neutral; SW6 - pin3 > > Valentine Barshak (5): > arm: shmobile: r8a7790: Add PCI USB host clock support > arm: shmobile: r8a7790: Add SATA clock > arm: shmobile: lager: Add USBHS support > arm: shmobile: lager: Add internal PCI support > arm: shmobile: lager: Add SATA support > > arch/arm/mach-shmobile/board-lager.c | 203 ++++++++++++++++++++++++++= +++++++ > arch/arm/mach-shmobile/clock-r8a7790.c | 25 +++- > 2 files changed, 227 insertions(+), 1 deletion(-) > I've rebased the series on top of the latest renesas-devel-v3.13-rc4-201312= 19 branch and split it into separate USB and SATA ones. The SATA support was posted y= esterday. I'll resend the USB part for both Lager/Koelsch boards in a bit. Thanks, Val.