From: Valentine <valentine.barshak@cogentembedded.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH 2/2] arm: shmobile: lager: Add VIN1 SoC camera support
Date: Thu, 26 Dec 2013 14:37:14 +0000 [thread overview]
Message-ID: <52BC3F1A.2070309@cogentembedded.com> (raw)
In-Reply-To: <1387911334-27117-3-git-send-email-valentine.barshak@cogentembedded.com>
On 12/26/2013 06:21 PM, Laurent Pinchart wrote:
> Hi Valentine,
>
> Thank you for the patch.
>
> Do you plan to implement DT support for the VIN driver in the near future ?
Obviously it has to be done. Though I'm not sure I'll be doing that in the near future.
>
> On Tuesday 24 December 2013 22:55:34 Valentine Barshak wrote:
>> This adds VIN1 SoC camera along with ADV7180 subdevice support to Lager.
>> VIN0 camera is not registered because it has ADV7612 I2C subdevice
>> which is not supported yet.
>>
>> Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
>> ---
>> arch/arm/mach-shmobile/board-lager.c | 76 +++++++++++++++++++++++++++++++++
>> 1 file changed, 76 insertions(+)
>>
>> diff --git a/arch/arm/mach-shmobile/board-lager.c
>> b/arch/arm/mach-shmobile/board-lager.c index f20c10a..50173ec 100644
>> --- a/arch/arm/mach-shmobile/board-lager.c
>> +++ b/arch/arm/mach-shmobile/board-lager.c
>> @@ -27,6 +27,7 @@
>> #include <linux/mmc/host.h>
>> #include <linux/mmc/sh_mmcif.h>
>> #include <linux/pinctrl/machine.h>
>> +#include <linux/platform_data/camera-rcar.h>
>> #include <linux/platform_data/gpio-rcar.h>
>> #include <linux/platform_data/rcar-du.h>
>> #include <linux/platform_device.h>
>> @@ -39,6 +40,7 @@
>> #include <mach/common.h>
>> #include <mach/irqs.h>
>> #include <mach/r8a7790.h>
>> +#include <media/soc_camera.h>
>> #include <asm/mach-types.h>
>> #include <asm/mach/arch.h>
>> #include <linux/mtd/partitions.h>
>> @@ -291,6 +293,62 @@ static const struct resource qspi_resources[]
>> __initconst = { DEFINE_RES_IRQ(gic_spi(184)),
>> };
>>
>> +/* VIN */
>> +static const struct resource vin_resources[] __initconst = {
>> + /* VIN0 */
>> + DEFINE_RES_MEM(0xe6ef0000, 0x1000),
>> + DEFINE_RES_IRQ(gic_spi(188)),
>> + /* VIN1 */
>> + DEFINE_RES_MEM(0xe6ef1000, 0x1000),
>> + DEFINE_RES_IRQ(gic_spi(189)),
>> +};
>> +
>> +void __init lager_add_vin_device(unsigned idx,
>> + struct rcar_vin_platform_data *pdata)
>
> You can make this function static.
Missed that one. Thanks, will do.
>
>> +{
>> + struct platform_device_info vin_info = {
>> + .parent = &platform_bus,
>> + .name = "r8a7790-vin",
>> + .id = idx,
>> + .res = &vin_resources[idx * 2],
>> + .num_res = 2,
>> + .dma_mask = DMA_BIT_MASK(32),
>> + .data = pdata,
>> + .size_data = sizeof(*pdata),
>> + };
>> +
>> + BUG_ON(idx > 1);
>> +
>> + platform_device_register_full(&vin_info);
>> +}
>> +
>> +#define LAGER_CAMERA(idx, name, addr, pdata, flag) \
>> +static struct i2c_board_info i2c_cam##idx##_device = { \
>> + I2C_BOARD_INFO(name, addr), \
>> +}; \
>> + \
>> +static struct rcar_vin_platform_data vin##idx##_pdata = { \
>> + .flags = flag, \
>> +}; \
>> + \
>> +static struct soc_camera_link cam##idx##_link = { \
>> + .bus_id = idx, \
>> + .board_info = &i2c_cam##idx##_device, \
>> + .i2c_adapter_id = 2, \
>> + .module_name = name, \
>> + .priv = pdata, \
>> +}
>> +
>> +/* Camera 0 is not currently supported due to adv7612 support missing */
>> +LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656);
>> +
>> +static void __init lager_add_camera1_device(void)
>> +{
>> + platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
>> + &cam1_link, sizeof(cam1_link));
>> + lager_add_vin_device(1, &vin1_pdata);
>> +}
>> +
>> static const struct pinctrl_map lager_pinctrl_map[] = {
>> /* DU (CN10: ARGB0, CN13: LVDS) */
>> PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
>> @@ -319,6 +377,22 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
>> "eth_rmii", "eth"),
>> PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
>> "intc_irq0", "intc"),
>> + /* VIN0 */
>> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
>> + "vin0_data24", "vin0"),
>> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
>> + "vin0_sync", "vin0"),
>> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
>> + "vin0_field", "vin0"),
>> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
>> + "vin0_clkenb", "vin0"),
>> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
>> + "vin0_clk", "vin0"),
>> + /* VIN1 */
>> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
>> + "vin1_data8", "vin1"),
>> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
>> + "vin1_clk", "vin1"),
>> };
>>
>> static void __init lager_add_standard_devices(void)
>> @@ -368,6 +442,8 @@ static void __init lager_add_standard_devices(void)
>> &vccq_sdhi0_info, sizeof(struct
> gpio_regulator_config));
>> platform_device_register_data(&platform_bus, "gpio-regulator",
>> gpio_regulator_idx++, &vccq_sdhi2_info, sizeof(struct
>> gpio_regulator_config)); +
>> + lager_add_camera1_device();
>> }
>>
>> /*
Thanks,
Val.
prev parent reply other threads:[~2013-12-26 14:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-24 18:55 [PATCH 2/2] arm: shmobile: lager: Add VIN1 SoC camera support Valentine Barshak
2013-12-26 14:21 ` Laurent Pinchart
2013-12-26 14:37 ` Valentine [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52BC3F1A.2070309@cogentembedded.com \
--to=valentine.barshak@cogentembedded.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).