From mboxrd@z Thu Jan 1 00:00:00 1970 From: Valentine Date: Wed, 15 Jan 2014 20:42:23 +0000 Subject: Re: [PATCH 1/2] ARM: dts: r8a7790: Add SATA nodes to r8a7790.dtsi Message-Id: <52D6F2AF.6020908@cogentembedded.com> List-Id: References: <1389719131-24376-2-git-send-email-valentine.barshak@cogentembedded.com> In-Reply-To: <1389719131-24376-2-git-send-email-valentine.barshak@cogentembedded.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On 01/15/2014 04:02 AM, Simon Horman wrote: > On Tue, Jan 14, 2014 at 10:04:12PM +0400, Valentine wrote: >> On 01/14/2014 09:23 PM, Laurent Pinchart wrote: >>> Hi Valentine, Hi Simon, Laurent, >>> >>> Thank you for the patch. >>> >>> On Tuesday 14 January 2014 21:05:30 Valentine Barshak wrote: >>>> This adds SATA[01] device nodes to r8a7790.dtsi >>>> >>>> Signed-off-by: Valentine Barshak >>>> --- >>>> arch/arm/boot/dts/r8a7790.dtsi | 18 ++++++++++++++++++ >>>> 1 file changed, 18 insertions(+) >>>> >>>> diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi >>>> index b2c2845..f2f5394 100644 >>>> --- a/arch/arm/boot/dts/r8a7790.dtsi >>>> +++ b/arch/arm/boot/dts/r8a7790.dtsi >>>> @@ -400,6 +400,24 @@ >>>> status = "disabled"; >>>> }; >>>> >>>> + sata0: sata@ee300000 { >>>> + compatible = "renesas,sata-r8a7790"; >>>> + reg = <0 0xee300000 0 0x2000>; >>>> + interrupt-parent = <&gic>; >>>> + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; >>>> + clocks = <&mstp8_clks R8A7790_CLK_SATA0>; >>> >>> If I'm not mistaken the RCar SATA DT bindings don't document the clocks >>> property. >> >> Yes, they don't, cause at that time the clocks were not supported. >> >>> Could you please submit a patch to fix that ? >> >> I could, but the patch that adds the description is still available only >> in the for-3.14 branch of the libata repo. > > I think you could provide a patch to update the bindings (documentation), > which is not part of this series, which applies to that branch. Okay. > > And once that has been acked or merged then this series could > be taken in parallel. > >> The other thing is that the clocks are not yet included in the r8a7779.dtsi, >> a snippet from which is used as an example of SATA bindings. > > So the bindings (documentation) includes an example which is not present in > r8a7779.dtsi? That sounds sane to me as there is no question > of a run-time dependency being a problem. The documentation includes an example of the R8A7779 SATA binding cause it was the only SoC supporting the SATA at that time. The problem is that the DT clock bindings are not supported on R8A7779. So we should either wait for them to become supported on R8A7779 or we may want to change the example to one of the Gen2 variants. > > But where is the patch to add the clocks to r8a7779.dtsi? Probably, has not been done yet. I guess, there's no DT clock support on r8a7779 yet. Laurent, do you have any patches for r8a7779? > Is it "ARM: shmobile: r8a7790: Add SATA clocks to device tree" which > I queued up yesterday? Nope, for the fact it adds the clocks to R8A7790, not R8A7779. > >> >> So we probably have to wait until both are available in 3.14. >> >> Thanks, >> Val. Thanks, Val. >> >>> >>> There's no need to delay this patch set. >>> for-3.14 >>>> + status = "disabled"; >>>> + }; >>>> + >>>> + sata1: sata@ee500000 { >>>> + compatible = "renesas,sata-r8a7790"; >>>> + reg = <0 0xee500000 0 0x2000>; >>>> + interrupt-parent = <&gic>; >>>> + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; >>>> + clocks = <&mstp8_clks R8A7790_CLK_SATA1>; >>>> + status = "disabled"; >>>> + }; >>>> + >>>> clocks { >>>> #address-cells = <2>; >>>> #size-cells = <2>; >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >