From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Dooks Date: Mon, 27 Jan 2014 12:17:56 +0000 Subject: Re: [PATCH V3 0/3] ARM: shmobile: lager: Add USB support Message-Id: <52E64E74.9000502@codethink.co.uk> List-Id: References: <1390602529-11867-1-git-send-email-valentine.barshak@cogentembedded.com> In-Reply-To: <1390602529-11867-1-git-send-email-valentine.barshak@cogentembedded.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On 27/01/14 10:02, Valentine wrote: > On 01/27/2014 01:59 PM, Ben Dooks wrote: >> On 24/01/14 [snip] >> Hi, when doing this have you come across a problem where the OHCI >> controller on USB0 fails to start with an initialisation error? I >> think it is something to do with the bridge setup but have yet to >> have enough time to look into this issue. >> > > All PCI ports have worked fine for me. > Please, check that the SW5/SW6 pins are set correctly on your board. SW5 is at position 1 SW6 is at position 1 -- Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius