From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benoit Cousson Date: Fri, 28 Feb 2014 16:34:55 +0000 Subject: Re: [RFC 0/4] ARM: shmobile: Add CPUFreq support for r8a7790-lager platform Message-Id: <5310BAAF.5030709@baylibre.com> List-Id: References: <1393456190-7870-1-git-send-email-bcousson@baylibre.com> In-Reply-To: <1393456190-7870-1-git-send-email-bcousson@baylibre.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-sh@vger.kernel.org On 28/02/2014 15:54, Geert Uytterhoeven wrote: > On Fri, Feb 28, 2014 at 3:15 PM, Benoit Cousson w= rote: >> For the voltage, it should be similar, but I do not have any information= and >> I'm not sure that the regulator used on the Koelsh board is the same >> (da9210). > > Koelsch also has a DA9210 regulator. At first sight, the wiring seems sim= ilar. > It's connected to i2c6 instead of i2c3, though. OK, that's a good news. Thanks for checking. Laurent, In order to check the voltage, just enable the DA9210 driver but do not=20 enable cpufreq. Then just check the regulator voltage. It was 1.08v by default on the Lager. Regards, Benoit > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m6= 8k.org > > In personal conversations with technical people, I call myself a hacker. = But > when I'm talking to journalists I just say "programmer" or something like= that. > -- Linus Torvalds > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > --=20 Beno=C3=AEt Cousson BayLibre Embedded Linux Technology Lab www.baylibre.com