From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v3 4/7] ARM: lager: add vin1 node
Date: Thu, 08 May 2014 23:37:13 +0000 [thread overview]
Message-ID: <536C1529.3060107@cogentembedded.com> (raw)
In-Reply-To: <1397471802-27216-5-git-send-email-ben.dooks@codethink.co.uk>
Hello.
On 04/14/2014 02:36 PM, Ben Dooks wrote:
> Add device-tree for vin1 (composite video in) on the
> lager board.
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> ---
> arch/arm/boot/dts/r8a7790-lager.dts | 38 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
> index a087421..6888866 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
[...]
> @@ -239,8 +244,41 @@
> status = "ok";
> pinctrl-0 = <&i2c2_pins>;
> pinctrl-names = "default";
> +
> + adv7180: composite-in@0x20 {
You're not using that label, as far as I could see.
> + compatible = "adi,adv7180";
> + reg = <0x20>;
> + remote = <&vin1>;
> +
> + port {
> + adv7180_1: endpoint {
So, you could use 'adv7180:' here instead...
> + bus-width = <8>;
> + remote-endpoint = <&vin1ep0>;
> + };
> + };
> + };
> +
WBR, Sergei
next prev parent reply other threads:[~2014-05-08 23:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 10:36 [PATCH v3 4/7] ARM: lager: add vin1 node Ben Dooks
2014-05-03 16:56 ` Guennadi Liakhovetski
2014-05-08 23:37 ` Sergei Shtylyov [this message]
2014-06-06 20:57 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536C1529.3060107@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).