From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Date: Sun, 11 May 2014 13:48:38 +0000 Subject: Re: [PATCH 2/3] ARM: shmobile: r8a7740 dtsi: Add Ethernet support Message-Id: <536F7FB6.5090508@cogentembedded.com> List-Id: References: <1399494750-31996-1-git-send-email-geert+renesas@glider.be> <1399494750-31996-2-git-send-email-geert+renesas@glider.be> <536B7FD3.5090506@cogentembedded.com> <536B8340.4010901@cogentembedded.com> <536BC445.8080007@cogentembedded.com> <536BD280.9070808@cogentembedded.com> <20140511010043.GZ31760@verge.net.au> In-Reply-To: <20140511010043.GZ31760@verge.net.au> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Simon Horman , Geert Uytterhoeven Cc: Geert Uytterhoeven , Magnus Damm , Bastian Hecht , Linux-sh list , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" Hello. On 05/11/2014 05:00 AM, Simon Horman wrote: >>>>> Mine was the same (but for BOCK-W board) but DT people didn't give a >>>>> damn. :-) So there's still no Ethernet support in BOCK-W DT. >>>> Yes there is: ethernet@18300000. >>> That's for an on-board SMSC911x, not for sh_eth. >> Oh, it has two Ethernet ports? Didn't know that. > IIRC only the SMSC911x is exposed on the Bock-W board. Not really. You're probably mixing it with Marzen. > From my point of view I would be happy to accept support for > the other port if there was some way (for someone to) verify it. There is, and you have accepted such support in the legacy board file. I had to postpone Ether DT support to the time when CCF support is available, though I have posted corresponding patches without the "clocks" property already. WBR, Sergei