linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v8] can: add Renesas R-Car CAN driver
@ 2014-04-11 21:52 Sergei Shtylyov
  2014-04-23 22:25 ` Sergei Shtylyov
  2014-05-12 14:53 ` Marc Kleine-Budde
  0 siblings, 2 replies; 4+ messages in thread
From: Sergei Shtylyov @ 2014-04-11 21:52 UTC (permalink / raw)
  To: wg, mkl, linux-can; +Cc: linux-sh, vksavl

Add support for the CAN controller found in Renesas R-Car SoCs. 

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
The patch is against the 'linux-can-next.git' repo.
Not posting to netdev@vger.kernel.org this time or DaveM will scold me. :-)

Changes in version 8:
- rewrote rcar_can_tx_done() to contain the loop in order to handle all possibly
  accumulated TX packets;
- moved clearing of TX FIFO interrupt into rcar_can_tx_done();
- renamed echo_skb_{head|tail} to tx_{head|tail} and extended them from 'u8' to
  'u32', switched to using these indexes modulo RCAR_CAN_FIFO_DEPTH instead  of
  the explicit wrap around RCAR_CAN_FIFO_DEPTH checks;
- changed/moved the TX FIFO full check in rcar_can_start_xmit();
- removed CLKR read in rcar_can_set_bittiming(), using 'struct rcar_can_priv::
  clock_select' instead and removing CLKR write from rcar_can_start().

Changes in version 7:
- changed TX algorithm to use mode in which TX FIFO interrupt is generated every
  time transmission completes, thus changed 3 fields of 'struct rcar_can_priv',
  removed #define RCAR_CAN_MIER1_TXFIT, and renamed #define RCAR_CAN_N_ECHO_SKB
  to RCAR_CAN_FIFO_DEPTH decreasing its value to 4;
- got the shifts in the BCR (24-bit register) field macros into the correct
  range;
- removed extra write to CLKR in rcar_can_set_bittiming(), adding comment about
  the register access peculiarities;
- restructured the loops polling STR.RSTST bit to avoid checkpatch.pl's errors;
- fixed heading comment format to avoid checkpatch.pl's warning.

Changes in version 6:
- removed '__packed' from 'struct rcar_can_mbox_regs' and 'struct
  rcar_can_regs';
- added counter to the loops polling STR.RSTST bit and converted them to use
  *for*;
- added error check and message in case of clk_[prepare_]enable() failure;
- fixed *goto* and error message in case of open_candev() failure;
- clarified check and added comment for calling netif_stop_queue();
- moved comments in theframe format decoding code to the right and so got rid of
  the braces;
- removed internal *for* loop from rcar_can_rx_poll(). converting *while* loop
  to *for*;
- converted 0xFF to lowercase;
- removed type cast in the 'ndev' variable initializer in rcar_can_interrupt();
- converted CLKR_* #define's to *enum*, used it in the platform data;
- changed the type of 'i' variable in tx_failure_cleanup() to *int*;
- fixed register_candev() error message to print the error code;
- added parens in the alloc_candev() error message;
- indented with tab the value of #define RCAR_CAN_NAPI_WEIGHT.

Changes in version 5:
- removed the code specific to the mailbox mode handling and added the code
  for the FIFO mode, dropping support for CAN_CTRLMODE_ONE_SHOT;
- stop accumulating errors in the byte 1 of an error frame;
- added #define RCAR_CAN_CTLR_CANM for CTLR.CANM field, added 'CANM_' infix to
  all its values;
- replaced ~RCAR_CAN_CTLR_CANM_FORCE_RESET with ~RCAR_CAN_CTLR_CANM; 
- added polling for the CAN reset status bit when going from/to CAN reset.

Changes in version 4:
- added 'RCAR_CAN_' prefix to all #define's;
- replaced all BIT(N) invocations with (1 << N) which allowed to remove casts
  to 'u8';
- called rcar_can_set_bittiming() from rcar_can_start()  again and  stopped
  registering it as do_set_bittiming() method which allowed to remove clock
  API calls and control register writes from this function and make it *void*;
- added #define RCAR_CAN_CTLR_IDFM for more clarity;
- clarified comment to #define RCAR_CAN_IER_TXMIE;
- did some whitespace cleanups.

Changes in version 3:
- replaced the register #define's with 'struct rcar_can_regs' fields, replaced
  rcar_can_{read|write}[bwl]() with mere {read|write}[bwl]();
- removed hardware bus-off recovery support which allowed to also remove
  rcar_can_start() prototype;
- added RX/TX error count to error data frame for error warning/passive;
- moved TX completion interrupt handling into separate function;
- added '__packed' to 'struct rcar_can_mbox_regs' and 'struct rcar_can_regs';
- removed unneeded type cast in the probe() method.

Changes in version 2:
- added function to clean up TX mailboxes after bus error and bus-off;
- added module parameter to enable hardware recovery from bus-off, added handler
  for the bus-off recovery interrupt, and set the control register according to
  the parameter value and the restart timer setting in rcar_can_start();
- changed the way CAN_ERR_CRTL_[RT]X_{PASSIVE|WARNING} flags are set to a more
  realistic one;
- replaced MBX_* macros and rcar_can_mbx_{read|write}[bl]() functions with
  'struct rcar_can_mbox_regs', 'struct rcar_can_regs', and {read|write}[bl](),
  replaced 'reg_base' field of 'struct rcar_can_priv' with 'struct rcar_can_regs
  __iomem *regs';
- added 'ier' field to 'struct rcar_can_priv' to cache the current value of the
  interrupt enable register;
- added a check for enabled interrupts on entry to rcar_can_interrupt();
- limited transmit mailbox search loop in rcar_can_interrupt();
- decoupled  TX byte count increment from can_get_echo_skb() call;
- removed netif_queue_stopped() call from rcar_can_interrupt();
- added clk_prepare_enable()/clk_disable_unprepare() to ndo_{open|close}(),
  do_set_bittiming(), and do_get_berr_counter() methods, removed clk_enable()
  call from the probe() method and clk_disable() call from the remove() method;
- allowed rcar_can_set_bittiming() to be called when the device is closed and
  remove  explicit call to it from rcar_can_start();
- switched to using mailbox number priority transmit mode, and switched to the
  sequential mailbox use in ndo_start_xmit() method;
- stopped reading the message control registers in ndo_start_xmit() method;
- avoided returning NETDEV_TX_BUSY from ndo_start_xmit() method;
- stopped reading data when RTR bit is set in the CAN frame;
- made 'num_pkts' variable *int* and moved its check to the *while* condition in
  rcar_can_rx_poll();
- used dev_get_platdata() in the probe() method;
- enabled bus error interrupt only if CAN_CTRLMODE_BERR_REPORTING flag is set;
- started reporting CAN_CTRLMODE_BERR_REPORTING support and stopped reporting
  CAN_CTRLMODE_3_SAMPLES support;
- set CAN_ERR_ACK flag on ACK error;
- switched to incrementing bus error counter only once per bus error interrupt;
- started switching to CAN sleep mode in rcar_can_stop() and stopped switching
  to it in the remove() method;
- removed netdev_err() calls on allocation failure in rcar_can_error() and
  rcar_can_rx_pkt();
- removed "CANi" from the register offset macro comments.

 drivers/net/can/Kconfig               |    9 
 drivers/net/can/Makefile              |    1 
 drivers/net/can/rcar_can.c            |  859 ++++++++++++++++++++++++++++++++++
 include/linux/can/platform/rcar_can.h |   17 
 4 files changed, 886 insertions(+)

Index: linux-can-next/drivers/net/can/Kconfig
=================================--- linux-can-next.orig/drivers/net/can/Kconfig
+++ linux-can-next/drivers/net/can/Kconfig
@@ -125,6 +125,15 @@ config CAN_GRCAN
 	  endian syntheses of the cores would need some modifications on
 	  the hardware level to work.
 
+config CAN_RCAR
+	tristate "Renesas R-Car CAN controller"
+	---help---
+	  Say Y here if you want to use CAN controller found on Renesas R-Car
+	  SoCs.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called rcar_can.
+
 source "drivers/net/can/mscan/Kconfig"
 
 source "drivers/net/can/sja1000/Kconfig"
Index: linux-can-next/drivers/net/can/Makefile
=================================--- linux-can-next.orig/drivers/net/can/Makefile
+++ linux-can-next/drivers/net/can/Makefile
@@ -25,5 +25,6 @@ obj-$(CONFIG_CAN_JANZ_ICAN3)	+= janz-ica
 obj-$(CONFIG_CAN_FLEXCAN)	+= flexcan.o
 obj-$(CONFIG_PCH_CAN)		+= pch_can.o
 obj-$(CONFIG_CAN_GRCAN)		+= grcan.o
+obj-$(CONFIG_CAN_RCAR)		+= rcar_can.o
 
 ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
Index: linux-can-next/drivers/net/can/rcar_can.c
=================================--- /dev/null
+++ linux-can-next/drivers/net/can/rcar_can.c
@@ -0,0 +1,859 @@
+/* Renesas R-Car CAN device driver
+ *
+ * Copyright (C) 2013 Cogent Embedded, Inc. <source@cogentembedded.com>
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/can/led.h>
+#include <linux/can/dev.h>
+#include <linux/clk.h>
+#include <linux/can/platform/rcar_can.h>
+
+#define RCAR_CAN_DRV_NAME	"rcar_can"
+
+/* Mailbox configuration:
+ * mailbox 60 - 63 - Rx FIFO mailboxes
+ * mailbox 56 - 59 - Tx FIFO mailboxes
+ * non-FIFO mailboxes are not used
+ */
+#define RCAR_CAN_N_MBX		64 /* Number of mailboxes in non-FIFO mode */
+#define RCAR_CAN_RX_FIFO_MBX	60 /* Mailbox - window to Rx FIFO */
+#define RCAR_CAN_TX_FIFO_MBX	56 /* Mailbox - window to Tx FIFO */
+#define RCAR_CAN_FIFO_DEPTH	4
+
+/* Mailbox registers structure */
+struct rcar_can_mbox_regs {
+	u32 id;		/* IDE and RTR bits, SID and EID */
+	u8 stub;	/* Not used */
+	u8 dlc;		/* Data Length Code - bits [0..3] */
+	u8 data[8];	/* Data Bytes */
+	u8 tsh;		/* Time Stamp Higher Byte */
+	u8 tsl;		/* Time Stamp Lower Byte */
+};
+
+struct rcar_can_regs {
+	struct rcar_can_mbox_regs mb[RCAR_CAN_N_MBX]; /* Mailbox registers */
+	u32 mkr_2_9[8];	/* Mask Registers 2-9 */
+	u32 fidcr[2];	/* FIFO Received ID Compare Register */
+	u32 mkivlr1;	/* Mask Invalid Register 1 */
+	u32 mier1;	/* Mailbox Interrupt Enable Register 1 */
+	u32 mkr_0_1[2];	/* Mask Registers 0-1 */
+	u32 mkivlr0;    /* Mask Invalid Register 0*/
+	u32 mier0;      /* Mailbox Interrupt Enable Register 0 */
+	u8 pad_440[0x3c0];
+	u8 mctl[64];	/* Message Control Registers */
+	u16 ctlr;	/* Control Register */
+	u16 str;	/* Status register */
+	u8 bcr[3];	/* Bit Configuration Register */
+	u8 clkr;	/* Clock Select Register */
+	u8 rfcr;	/* Receive FIFO Control Register */
+	u8 rfpcr;	/* Receive FIFO Pointer Control Register */
+	u8 tfcr;	/* Transmit FIFO Control Register */
+	u8 tfpcr;       /* Transmit FIFO Pointer Control Register */
+	u8 eier;	/* Error Interrupt Enable Register */
+	u8 eifr;	/* Error Interrupt Factor Judge Register */
+	u8 recr;	/* Receive Error Count Register */
+	u8 tecr;        /* Transmit Error Count Register */
+	u8 ecsr;	/* Error Code Store Register */
+	u8 cssr;	/* Channel Search Support Register */
+	u8 mssr;	/* Mailbox Search Status Register */
+	u8 msmr;	/* Mailbox Search Mode Register */
+	u16 tsr;	/* Time Stamp Register */
+	u8 afsr;	/* Acceptance Filter Support Register */
+	u8 pad_857;
+	u8 tcr;		/* Test Control Register */
+	u8 pad_859[7];
+	u8 ier;		/* Interrupt Enable Register */
+	u8 isr;		/* Interrupt Status Register */
+	u8 pad_862;
+	u8 mbsmr;	/* Mailbox Search Mask Register */
+};
+
+struct rcar_can_priv {
+	struct can_priv can;	/* Must be the first member! */
+	struct net_device *ndev;
+	struct napi_struct napi;
+	struct rcar_can_regs __iomem *regs;
+	struct clk *clk;
+	u8 tx_dlc[RCAR_CAN_FIFO_DEPTH];
+	u32 tx_head;
+	u32 tx_tail;
+	u8 clock_select;
+	u8 ier;
+};
+
+static const struct can_bittiming_const rcar_can_bittiming_const = {
+	.name = RCAR_CAN_DRV_NAME,
+	.tseg1_min = 4,
+	.tseg1_max = 16,
+	.tseg2_min = 2,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 1024,
+	.brp_inc = 1,
+};
+
+/* Control Register bits */
+#define RCAR_CAN_CTLR_BOM	(3 << 11) /* Bus-Off Recovery Mode Bits */
+#define RCAR_CAN_CTLR_BOM_ENT	(1 << 11) /* Entry to halt mode */
+					/* at bus-off entry */
+#define RCAR_CAN_CTLR_SLPM	(1 << 10)
+#define RCAR_CAN_CTLR_CANM	(3 << 8) /* Operating Mode Select Bit */
+#define RCAR_CAN_CTLR_CANM_HALT	(1 << 9)
+#define RCAR_CAN_CTLR_CANM_RESET (1 << 8)
+#define RCAR_CAN_CTLR_CANM_FORCE_RESET (3 << 8)
+#define RCAR_CAN_CTLR_MLM	(1 << 3) /* Message Lost Mode Select */
+#define RCAR_CAN_CTLR_IDFM	(3 << 1) /* ID Format Mode Select Bits */
+#define RCAR_CAN_CTLR_IDFM_MIXED (1 << 2) /* Mixed ID mode */
+#define RCAR_CAN_CTLR_MBM	(1 << 0) /* Mailbox Mode select */
+
+/* Status Register bits */
+#define RCAR_CAN_STR_RSTST	(1 << 8) /* Reset Status Bit */
+
+/* FIFO Received ID Compare Registers 0 and 1 bits */
+#define RCAR_CAN_FIDCR_IDE	(1 << 31) /* ID Extension Bit */
+#define RCAR_CAN_FIDCR_RTR	(1 << 30) /* Remote Transmission Request Bit */
+
+/* Receive FIFO Control Register bits */
+#define RCAR_CAN_RFCR_RFEST	(1 << 7) /* Receive FIFO Empty Status Flag */
+#define RCAR_CAN_RFCR_RFE	(1 << 0) /* Receive FIFO Enable */
+
+/* Transmit FIFO Control Register bits */
+#define RCAR_CAN_TFCR_TFUST	(7 << 1) /* Transmit FIFO Unsent Message */
+					/* Number Status Bits */
+#define RCAR_CAN_TFCR_TFUST_SHIFT 1	/* Offset of Transmit FIFO Unsent */
+					/* Message Number Status Bits */
+#define RCAR_CAN_TFCR_TFE	(1 << 0) /* Transmit FIFO Enable */
+
+#define RCAR_CAN_N_RX_MKREGS1	2	/* Number of mask registers */
+					/* for Rx mailboxes 0-31 */
+#define RCAR_CAN_N_RX_MKREGS2	8
+
+/* Bit Configuration Register settings */
+#define RCAR_CAN_BCR_TSEG1(x)	(((x) & 0x0f) << 20)
+#define RCAR_CAN_BCR_BPR(x)	(((x) & 0x3ff) << 8)
+#define RCAR_CAN_BCR_SJW(x)	(((x) & 0x3) << 4)
+#define RCAR_CAN_BCR_TSEG2(x)	((x) & 0x07)
+
+/* Mailbox and Mask Registers bits */
+#define RCAR_CAN_IDE		(1 << 31)
+#define RCAR_CAN_RTR		(1 << 30)
+#define RCAR_CAN_SID_SHIFT	18
+
+/* Mailbox Interrupt Enable Register 1 bits */
+#define RCAR_CAN_MIER1_RXFIE	(1 << 28) /* Receive  FIFO Interrupt Enable */
+#define RCAR_CAN_MIER1_TXFIE	(1 << 24) /* Transmit FIFO Interrupt Enable */
+
+/* Interrupt Enable Register bits */
+#define RCAR_CAN_IER_ERSIE	(1 << 5) /* Error (ERS) Interrupt Enable Bit */
+#define RCAR_CAN_IER_RXFIE	(1 << 4) /* Reception FIFO Interrupt */
+					/* Enable Bit */
+#define RCAR_CAN_IER_TXFIE	(1 << 3) /* Transmission FIFO Interrupt */
+					/* Enable Bit */
+/* Interrupt Status Register bits */
+#define RCAR_CAN_ISR_ERSF	(1 << 5) /* Error (ERS) Interrupt Status Bit */
+#define RCAR_CAN_ISR_RXFF	(1 << 4) /* Reception FIFO Interrupt */
+					/* Status Bit */
+#define RCAR_CAN_ISR_TXFF	(1 << 3) /* Transmission FIFO Interrupt */
+					/* Status Bit */
+
+/* Error Interrupt Enable Register bits */
+#define RCAR_CAN_EIER_BLIE	(1 << 7) /* Bus Lock Interrupt Enable */
+#define RCAR_CAN_EIER_OLIE	(1 << 6) /* Overload Frame Transmit */
+					/* Interrupt Enable */
+#define RCAR_CAN_EIER_ORIE	(1 << 5) /* Receive Overrun  Interrupt Enable */
+#define RCAR_CAN_EIER_BORIE	(1 << 4) /* Bus-Off Recovery Interrupt Enable */
+#define RCAR_CAN_EIER_BOEIE	(1 << 3) /* Bus-Off Entry Interrupt Enable */
+#define RCAR_CAN_EIER_EPIE	(1 << 2) /* Error Passive Interrupt Enable */
+#define RCAR_CAN_EIER_EWIE	(1 << 1) /* Error Warning Interrupt Enable */
+#define RCAR_CAN_EIER_BEIE	(1 << 0) /* Bus Error Interrupt Enable */
+
+/* Error Interrupt Factor Judge Register bits */
+#define RCAR_CAN_EIFR_BLIF	(1 << 7) /* Bus Lock Detect Flag */
+#define RCAR_CAN_EIFR_OLIF	(1 << 6) /* Overload Frame Transmission */
+					 /* Detect Flag */
+#define RCAR_CAN_EIFR_ORIF	(1 << 5) /* Receive Overrun Detect Flag */
+#define RCAR_CAN_EIFR_BORIF	(1 << 4) /* Bus-Off Recovery Detect Flag */
+#define RCAR_CAN_EIFR_BOEIF	(1 << 3) /* Bus-Off Entry Detect Flag */
+#define RCAR_CAN_EIFR_EPIF	(1 << 2) /* Error Passive Detect Flag */
+#define RCAR_CAN_EIFR_EWIF	(1 << 1) /* Error Warning Detect Flag */
+#define RCAR_CAN_EIFR_BEIF	(1 << 0) /* Bus Error Detect Flag */
+
+/* Error Code Store Register bits */
+#define RCAR_CAN_ECSR_EDPM	(1 << 7) /* Error Display Mode Select Bit */
+#define RCAR_CAN_ECSR_ADEF	(1 << 6) /* ACK Delimiter Error Flag */
+#define RCAR_CAN_ECSR_BE0F	(1 << 5) /* Bit Error (dominant) Flag */
+#define RCAR_CAN_ECSR_BE1F	(1 << 4) /* Bit Error (recessive) Flag */
+#define RCAR_CAN_ECSR_CEF	(1 << 3) /* CRC Error Flag */
+#define RCAR_CAN_ECSR_AEF	(1 << 2) /* ACK Error Flag */
+#define RCAR_CAN_ECSR_FEF	(1 << 1) /* Form Error Flag */
+#define RCAR_CAN_ECSR_SEF	(1 << 0) /* Stuff Error Flag */
+
+#define RCAR_CAN_NAPI_WEIGHT	4
+#define MAX_STR_READS		0x100
+
+static void tx_failure_cleanup(struct net_device *ndev)
+{
+	int i;
+
+	for (i = 0; i < RCAR_CAN_FIFO_DEPTH; i++)
+		can_free_echo_skb(ndev, i);
+}
+
+static void rcar_can_error(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	u8 eifr, txerr = 0, rxerr = 0;
+
+	/* Propagate the error condition to the CAN stack */
+	skb = alloc_can_err_skb(ndev, &cf);
+	if (!skb)
+		return;
+
+	eifr = readb(&priv->regs->eifr);
+	if (eifr & (RCAR_CAN_EIFR_EWIF | RCAR_CAN_EIFR_EPIF)) {
+		cf->can_id |= CAN_ERR_CRTL;
+		txerr = readb(&priv->regs->tecr);
+		rxerr = readb(&priv->regs->recr);
+		cf->data[6] = txerr;
+		cf->data[7] = rxerr;
+	}
+	if (eifr & RCAR_CAN_EIFR_BEIF) {
+		int rx_errors = 0, tx_errors = 0;
+		u8 ecsr;
+
+		netdev_dbg(priv->ndev, "Bus error interrupt:\n");
+		cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
+		cf->data[2] = CAN_ERR_PROT_UNSPEC;
+
+		ecsr = readb(&priv->regs->ecsr);
+		if (ecsr & RCAR_CAN_ECSR_ADEF) {
+			netdev_dbg(priv->ndev, "ACK Delimiter Error\n");
+			cf->data[3] |= CAN_ERR_PROT_LOC_ACK_DEL;
+			tx_errors++;
+			writeb(~RCAR_CAN_ECSR_ADEF, &priv->regs->ecsr);
+		}
+		if (ecsr & RCAR_CAN_ECSR_BE0F) {
+			netdev_dbg(priv->ndev, "Bit Error (dominant)\n");
+			cf->data[2] |= CAN_ERR_PROT_BIT0;
+			tx_errors++;
+			writeb(~RCAR_CAN_ECSR_BE0F, &priv->regs->ecsr);
+		}
+		if (ecsr & RCAR_CAN_ECSR_BE1F) {
+			netdev_dbg(priv->ndev, "Bit Error (recessive)\n");
+			cf->data[2] |= CAN_ERR_PROT_BIT1;
+			tx_errors++;
+			writeb(~RCAR_CAN_ECSR_BE1F, &priv->regs->ecsr);
+		}
+		if (ecsr & RCAR_CAN_ECSR_CEF) {
+			netdev_dbg(priv->ndev, "CRC Error\n");
+			cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
+			rx_errors++;
+			writeb(~RCAR_CAN_ECSR_CEF, &priv->regs->ecsr);
+		}
+		if (ecsr & RCAR_CAN_ECSR_AEF) {
+			netdev_dbg(priv->ndev, "ACK Error\n");
+			cf->can_id |= CAN_ERR_ACK;
+			cf->data[3] |= CAN_ERR_PROT_LOC_ACK;
+			tx_errors++;
+			writeb(~RCAR_CAN_ECSR_AEF, &priv->regs->ecsr);
+		}
+		if (ecsr & RCAR_CAN_ECSR_FEF) {
+			netdev_dbg(priv->ndev, "Form Error\n");
+			cf->data[2] |= CAN_ERR_PROT_FORM;
+			rx_errors++;
+			writeb(~RCAR_CAN_ECSR_FEF, &priv->regs->ecsr);
+		}
+		if (ecsr & RCAR_CAN_ECSR_SEF) {
+			netdev_dbg(priv->ndev, "Stuff Error\n");
+			cf->data[2] |= CAN_ERR_PROT_STUFF;
+			rx_errors++;
+			writeb(~RCAR_CAN_ECSR_SEF, &priv->regs->ecsr);
+		}
+
+		priv->can.can_stats.bus_error++;
+		ndev->stats.rx_errors += rx_errors;
+		ndev->stats.tx_errors += tx_errors;
+		writeb(~RCAR_CAN_EIFR_BEIF, &priv->regs->eifr);
+	}
+	if (eifr & RCAR_CAN_EIFR_EWIF) {
+		netdev_dbg(priv->ndev, "Error warning interrupt\n");
+		priv->can.state = CAN_STATE_ERROR_WARNING;
+		priv->can.can_stats.error_warning++;
+		cf->data[1] = txerr > rxerr ? CAN_ERR_CRTL_TX_WARNING :
+					      CAN_ERR_CRTL_RX_WARNING;
+		/* Clear interrupt condition */
+		writeb(~RCAR_CAN_EIFR_EWIF, &priv->regs->eifr);
+	}
+	if (eifr & RCAR_CAN_EIFR_EPIF) {
+		netdev_dbg(priv->ndev, "Error passive interrupt\n");
+		priv->can.state = CAN_STATE_ERROR_PASSIVE;
+		priv->can.can_stats.error_passive++;
+		cf->data[1] = txerr > rxerr ? CAN_ERR_CRTL_TX_PASSIVE :
+					      CAN_ERR_CRTL_RX_PASSIVE;
+		/* Clear interrupt condition */
+		writeb(~RCAR_CAN_EIFR_EPIF, &priv->regs->eifr);
+	}
+	if (eifr & RCAR_CAN_EIFR_BOEIF) {
+		netdev_dbg(priv->ndev, "Bus-off entry interrupt\n");
+		tx_failure_cleanup(ndev);
+		priv->ier = RCAR_CAN_IER_ERSIE;
+		writeb(priv->ier, &priv->regs->ier);
+		priv->can.state = CAN_STATE_BUS_OFF;
+		cf->can_id |= CAN_ERR_BUSOFF;
+		/* Clear interrupt condition */
+		writeb(~RCAR_CAN_EIFR_BOEIF, &priv->regs->eifr);
+		can_bus_off(ndev);
+	}
+	if (eifr & RCAR_CAN_EIFR_ORIF) {
+		netdev_dbg(priv->ndev, "Receive overrun error interrupt\n");
+		cf->can_id |= CAN_ERR_CRTL;
+		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		ndev->stats.rx_over_errors++;
+		ndev->stats.rx_errors++;
+		writeb(~RCAR_CAN_EIFR_ORIF, &priv->regs->eifr);
+	}
+	if (eifr & RCAR_CAN_EIFR_OLIF) {
+		netdev_dbg(priv->ndev,
+			   "Overload Frame Transmission error interrupt\n");
+		cf->can_id |= CAN_ERR_PROT;
+		cf->data[2] |= CAN_ERR_PROT_OVERLOAD;
+		ndev->stats.rx_over_errors++;
+		ndev->stats.rx_errors++;
+		writeb(~RCAR_CAN_EIFR_OLIF, &priv->regs->eifr);
+	}
+
+	netif_rx(skb);
+	stats->rx_packets++;
+	stats->rx_bytes += cf->can_dlc;
+}
+
+static void rcar_can_tx_done(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	u8 isr;
+
+	while (1) {
+		u8 unsent = readb(&priv->regs->tfcr);
+
+		unsent = (unsent & RCAR_CAN_TFCR_TFUST) >>
+			  RCAR_CAN_TFCR_TFUST_SHIFT;
+		if (priv->tx_head - priv->tx_tail <= unsent)
+			break;
+		stats->tx_packets++;
+		stats->tx_bytes += priv->tx_dlc[priv->tx_tail %
+						RCAR_CAN_FIFO_DEPTH];
+		priv->tx_dlc[priv->tx_tail % RCAR_CAN_FIFO_DEPTH] = 0;
+		can_get_echo_skb(ndev, priv->tx_tail % RCAR_CAN_FIFO_DEPTH);
+		priv->tx_tail++;
+		can_led_event(ndev, CAN_LED_EVENT_TX);
+		netif_wake_queue(ndev);
+	}
+	/* Clear interrupt */
+	isr = readb(&priv->regs->isr);
+	writeb(isr & ~RCAR_CAN_ISR_TXFF, &priv->regs->isr);
+}
+
+static irqreturn_t rcar_can_interrupt(int irq, void *dev_id)
+{
+	struct net_device *ndev = dev_id;
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u8 isr;
+
+	isr = readb(&priv->regs->isr);
+	if (!(isr & priv->ier))
+		return IRQ_NONE;
+
+	if (isr & RCAR_CAN_ISR_ERSF)
+		rcar_can_error(ndev);
+
+	if (isr & RCAR_CAN_ISR_TXFF)
+		rcar_can_tx_done(ndev);
+
+	if (isr & RCAR_CAN_ISR_RXFF) {
+		if (napi_schedule_prep(&priv->napi)) {
+			/* Disable Rx FIFO interrupts */
+			priv->ier &= ~RCAR_CAN_IER_RXFIE;
+			writeb(priv->ier, &priv->regs->ier);
+			__napi_schedule(&priv->napi);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void rcar_can_set_bittiming(struct net_device *dev)
+{
+	struct rcar_can_priv *priv = netdev_priv(dev);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	u32 bcr;
+
+	bcr = RCAR_CAN_BCR_TSEG1(bt->phase_seg1 + bt->prop_seg - 1) |
+	      RCAR_CAN_BCR_BPR(bt->brp - 1) | RCAR_CAN_BCR_SJW(bt->sjw - 1) |
+	      RCAR_CAN_BCR_TSEG2(bt->phase_seg2 - 1);
+	/* Don't overwrite CLKR with 32-bit BCR access; CLKR has 8-bit access.
+	 * All the registers are big-endian but they get byte-swapped on 32-bit
+	 * read/write (but not on 8-bit, contrary to the manuals)...
+	 */
+	writel((bcr << 8) | priv->clock_select, &priv->regs->bcr);
+}
+
+static void rcar_can_start(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u16 ctlr;
+	int i;
+
+	/* Set controller to known mode:
+	 * - FIFO mailbox mode
+	 * - accept all messages
+	 * - overrun mode
+	 * CAN is in sleep mode after MCU hardware or software reset.
+	 */
+	ctlr = readw(&priv->regs->ctlr);
+	ctlr &= ~RCAR_CAN_CTLR_SLPM;
+	writew(ctlr, &priv->regs->ctlr);
+	/* Go to reset mode */
+	ctlr |= RCAR_CAN_CTLR_CANM_FORCE_RESET;
+	writew(ctlr, &priv->regs->ctlr);
+	for (i = 0; i < MAX_STR_READS; i++) {
+		if (readw(&priv->regs->str) & RCAR_CAN_STR_RSTST)
+			break;
+	}
+	rcar_can_set_bittiming(ndev);
+	ctlr |= RCAR_CAN_CTLR_IDFM_MIXED; /* Select mixed ID mode */
+	ctlr |= RCAR_CAN_CTLR_BOM_ENT;	/* Entry to halt mode automatically */
+					/* at bus-off */
+	ctlr |= RCAR_CAN_CTLR_MBM;	/* Select FIFO mailbox mode */
+	ctlr |= RCAR_CAN_CTLR_MLM;	/* Overrun mode */
+	writew(ctlr, &priv->regs->ctlr);
+
+	/* Accept all SID and EID */
+	writel(0, &priv->regs->mkr_2_9[6]);
+	writel(0, &priv->regs->mkr_2_9[7]);
+	/* In FIFO mailbox mode, write "0" to bits 24 to 31 */
+	writel(0, &priv->regs->mkivlr1);
+	/* Accept all frames */
+	writel(0, &priv->regs->fidcr[0]);
+	writel(RCAR_CAN_FIDCR_IDE | RCAR_CAN_FIDCR_RTR, &priv->regs->fidcr[1]);
+	/* Enable and configure FIFO mailbox interrupts */
+	writel(RCAR_CAN_MIER1_RXFIE | RCAR_CAN_MIER1_TXFIE, &priv->regs->mier1);
+
+	priv->ier = RCAR_CAN_IER_ERSIE | RCAR_CAN_IER_RXFIE |
+		    RCAR_CAN_IER_TXFIE;
+	writeb(priv->ier, &priv->regs->ier);
+
+	/* Accumulate error codes */
+	writeb(RCAR_CAN_ECSR_EDPM, &priv->regs->ecsr);
+	/* Enable error interrupts */
+	writeb(RCAR_CAN_EIER_EWIE | RCAR_CAN_EIER_EPIE | RCAR_CAN_EIER_BOEIE |
+	       (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING ?
+	       RCAR_CAN_EIER_BEIE : 0) | RCAR_CAN_EIER_ORIE |
+	       RCAR_CAN_EIER_OLIE, &priv->regs->eier);
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	/* Go to operation mode */
+	writew(ctlr & ~RCAR_CAN_CTLR_CANM, &priv->regs->ctlr);
+	for (i = 0; i < MAX_STR_READS; i++) {
+		if (!(readw(&priv->regs->str) & RCAR_CAN_STR_RSTST))
+			break;
+	}
+	/* Enable Rx and Tx FIFO */
+	writeb(RCAR_CAN_RFCR_RFE, &priv->regs->rfcr);
+	writeb(RCAR_CAN_TFCR_TFE, &priv->regs->tfcr);
+}
+
+static int rcar_can_open(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err) {
+		netdev_err(ndev, "clk_prepare_enable() failed, error %d\n",
+			   err);
+		goto out;
+	}
+	err = open_candev(ndev);
+	if (err) {
+		netdev_err(ndev, "open_candev() failed, error %d\n", err);
+		goto out_clock;
+	}
+	napi_enable(&priv->napi);
+	err = request_irq(ndev->irq, rcar_can_interrupt, 0, ndev->name, ndev);
+	if (err) {
+		netdev_err(ndev, "error requesting interrupt %x\n", ndev->irq);
+		goto out_close;
+	}
+	can_led_event(ndev, CAN_LED_EVENT_OPEN);
+	rcar_can_start(ndev);
+	netif_start_queue(ndev);
+	return 0;
+out_close:
+	napi_disable(&priv->napi);
+	close_candev(ndev);
+out_clock:
+	clk_disable_unprepare(priv->clk);
+out:
+	return err;
+}
+
+static void rcar_can_stop(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u16 ctlr;
+	int i;
+
+	/* Go to (force) reset mode */
+	ctlr = readw(&priv->regs->ctlr);
+	ctlr |= RCAR_CAN_CTLR_CANM_FORCE_RESET;
+	writew(ctlr, &priv->regs->ctlr);
+	for (i = 0; i < MAX_STR_READS; i++) {
+		if (readw(&priv->regs->str) & RCAR_CAN_STR_RSTST)
+			break;
+	}
+	writel(0, &priv->regs->mier0);
+	writel(0, &priv->regs->mier1);
+	writeb(0, &priv->regs->ier);
+	writeb(0, &priv->regs->eier);
+	/* Go to sleep mode */
+	ctlr |= RCAR_CAN_CTLR_SLPM;
+	writew(ctlr, &priv->regs->ctlr);
+	priv->can.state = CAN_STATE_STOPPED;
+}
+
+static int rcar_can_close(struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	rcar_can_stop(ndev);
+	free_irq(ndev->irq, ndev);
+	napi_disable(&priv->napi);
+	clk_disable_unprepare(priv->clk);
+	close_candev(ndev);
+	can_led_event(ndev, CAN_LED_EVENT_STOP);
+	return 0;
+}
+
+static netdev_tx_t rcar_can_start_xmit(struct sk_buff *skb,
+				       struct net_device *ndev)
+{
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	u32 data, i;
+
+	if (can_dropped_invalid_skb(ndev, skb))
+		return NETDEV_TX_OK;
+
+	if (cf->can_id & CAN_EFF_FLAG)	/* Extended frame format */
+		data = (cf->can_id & CAN_EFF_MASK) | RCAR_CAN_IDE;
+	else				/* Standard frame format */
+		data = (cf->can_id & CAN_SFF_MASK) << RCAR_CAN_SID_SHIFT;
+
+	if (cf->can_id & CAN_RTR_FLAG)	/* Remote transmission request */
+		data |= RCAR_CAN_RTR;
+
+	writel(data, &priv->regs->mb[RCAR_CAN_TX_FIFO_MBX].id);
+
+	writeb(cf->can_dlc, &priv->regs->mb[RCAR_CAN_TX_FIFO_MBX].dlc);
+
+	for (i = 0; i < cf->can_dlc; i++)
+		writeb(cf->data[i],
+		       &priv->regs->mb[RCAR_CAN_TX_FIFO_MBX].data[i]);
+
+	priv->tx_dlc[priv->tx_head % RCAR_CAN_FIFO_DEPTH] = cf->can_dlc;
+	can_put_echo_skb(skb, ndev, priv->tx_head % RCAR_CAN_FIFO_DEPTH);
+	priv->tx_head++;
+	/* Start Tx: write 0xff to the TFPCR register to increment
+	 * the CPU-side pointer for the transmit FIFO to the next
+	 * mailbox location
+	 */
+	writeb(0xff, &priv->regs->tfpcr);
+	/* Stop the queue if we've filled all FIFO entries */
+	if (priv->tx_head - priv->tx_tail >= RCAR_CAN_FIFO_DEPTH)
+		netif_stop_queue(ndev);
+
+	return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops rcar_can_netdev_ops = {
+	.ndo_open = rcar_can_open,
+	.ndo_stop = rcar_can_close,
+	.ndo_start_xmit = rcar_can_start_xmit,
+};
+
+static void rcar_can_rx_pkt(struct rcar_can_priv *priv)
+{
+	struct net_device_stats *stats = &priv->ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	u32 data;
+	u8 dlc;
+
+	skb = alloc_can_skb(priv->ndev, &cf);
+	if (!skb) {
+		stats->rx_dropped++;
+		return;
+	}
+
+	data = readl(&priv->regs->mb[RCAR_CAN_RX_FIFO_MBX].id);
+	if (data & RCAR_CAN_IDE)
+		cf->can_id = (data & CAN_EFF_MASK) | CAN_EFF_FLAG;
+	else
+		cf->can_id = (data >> RCAR_CAN_SID_SHIFT) & CAN_SFF_MASK;
+
+	dlc = readb(&priv->regs->mb[RCAR_CAN_RX_FIFO_MBX].dlc);
+	cf->can_dlc = get_can_dlc(dlc);
+	if (data & RCAR_CAN_RTR) {
+		cf->can_id |= CAN_RTR_FLAG;
+	} else {
+		for (dlc = 0; dlc < cf->can_dlc; dlc++)
+			cf->data[dlc] +			readb(&priv->regs->mb[RCAR_CAN_RX_FIFO_MBX].data[dlc]);
+	}
+
+	can_led_event(priv->ndev, CAN_LED_EVENT_RX);
+
+	netif_receive_skb(skb);
+	stats->rx_bytes += cf->can_dlc;
+	stats->rx_packets++;
+}
+
+static int rcar_can_rx_poll(struct napi_struct *napi, int quota)
+{
+	struct rcar_can_priv *priv = container_of(napi,
+						  struct rcar_can_priv, napi);
+	int num_pkts;
+
+	for (num_pkts = 0; num_pkts < quota; num_pkts++) {
+		u8 rfcr, isr;
+
+		isr = readb(&priv->regs->isr);
+		/* Clear interrupt bit */
+		if (isr & RCAR_CAN_ISR_RXFF)
+			writeb(isr & ~RCAR_CAN_ISR_RXFF, &priv->regs->isr);
+		rfcr = readb(&priv->regs->rfcr);
+		if (rfcr & RCAR_CAN_RFCR_RFEST)
+			break;
+		rcar_can_rx_pkt(priv);
+		/* Write 0xff to the RFPCR register to increment
+		 * the CPU-side pointer for the receive FIFO
+		 * to the next mailbox location
+		 */
+		writeb(0xff, &priv->regs->rfpcr);
+	}
+	/* All packets processed */
+	if (num_pkts < quota) {
+		napi_complete(napi);
+		priv->ier |= RCAR_CAN_IER_RXFIE;
+		writeb(priv->ier, &priv->regs->ier);
+	}
+	return num_pkts;
+}
+
+static int rcar_can_do_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+	switch (mode) {
+	case CAN_MODE_START:
+		rcar_can_start(ndev);
+		netif_wake_queue(ndev);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int rcar_can_get_berr_counter(const struct net_device *dev,
+				     struct can_berr_counter *bec)
+{
+	struct rcar_can_priv *priv = netdev_priv(dev);
+	int err;
+
+	err = clk_prepare_enable(priv->clk);
+	if (err)
+		return err;
+	bec->txerr = readb(&priv->regs->tecr);
+	bec->rxerr = readb(&priv->regs->recr);
+	clk_disable_unprepare(priv->clk);
+	return 0;
+}
+
+static int rcar_can_probe(struct platform_device *pdev)
+{
+	struct rcar_can_platform_data *pdata;
+	struct rcar_can_priv *priv;
+	struct net_device *ndev;
+	struct resource *mem;
+	void __iomem *addr;
+	int err = -ENODEV;
+	int irq;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data provided!\n");
+		goto fail;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "No IRQ resource\n");
+		goto fail;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	addr = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(addr)) {
+		err = PTR_ERR(addr);
+		goto fail;
+	}
+
+	ndev = alloc_candev(sizeof(struct rcar_can_priv), RCAR_CAN_FIFO_DEPTH);
+	if (!ndev) {
+		dev_err(&pdev->dev, "alloc_candev() failed\n");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	priv = netdev_priv(ndev);
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		err = PTR_ERR(priv->clk);
+		dev_err(&pdev->dev, "cannot get clock: %d\n", err);
+		goto fail_clk;
+	}
+
+	ndev->netdev_ops = &rcar_can_netdev_ops;
+	ndev->irq = irq;
+	ndev->flags |= IFF_ECHO;
+	priv->ndev = ndev;
+	priv->regs = addr;
+	priv->clock_select = pdata->clock_select;
+	priv->can.clock.freq = clk_get_rate(priv->clk);
+	priv->can.bittiming_const = &rcar_can_bittiming_const;
+	priv->can.do_set_mode = rcar_can_do_set_mode;
+	priv->can.do_get_berr_counter = rcar_can_get_berr_counter;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING;
+	platform_set_drvdata(pdev, ndev);
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+
+	netif_napi_add(ndev, &priv->napi, rcar_can_rx_poll,
+		       RCAR_CAN_NAPI_WEIGHT);
+	err = register_candev(ndev);
+	if (err) {
+		dev_err(&pdev->dev, "register_candev() failed, error %d\n",
+			err);
+		goto fail_candev;
+	}
+
+	devm_can_led_init(ndev);
+
+	dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%u)\n",
+		 priv->regs, ndev->irq);
+
+	return 0;
+fail_candev:
+	netif_napi_del(&priv->napi);
+fail_clk:
+	free_candev(ndev);
+fail:
+	return err;
+}
+
+static int rcar_can_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+
+	unregister_candev(ndev);
+	netif_napi_del(&priv->napi);
+	free_candev(ndev);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rcar_can_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u16 ctlr;
+
+	if (netif_running(ndev)) {
+		netif_stop_queue(ndev);
+		netif_device_detach(ndev);
+	}
+	ctlr = readw(&priv->regs->ctlr);
+	ctlr |= RCAR_CAN_CTLR_CANM_HALT;
+	writew(ctlr, &priv->regs->ctlr);
+	ctlr |= RCAR_CAN_CTLR_SLPM;
+	writew(ctlr, &priv->regs->ctlr);
+	priv->can.state = CAN_STATE_SLEEPING;
+
+	clk_disable(priv->clk);
+	return 0;
+}
+
+static int rcar_can_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct rcar_can_priv *priv = netdev_priv(ndev);
+	u16 ctlr;
+	int err;
+
+	err = clk_enable(priv->clk);
+	if (err) {
+		netdev_err(ndev, "clk_enable() failed, error %d\n", err);
+		return err;
+	}
+
+	ctlr = readw(&priv->regs->ctlr);
+	ctlr &= ~RCAR_CAN_CTLR_SLPM;
+	writew(ctlr, &priv->regs->ctlr);
+	ctlr &= ~RCAR_CAN_CTLR_CANM;
+	writew(ctlr, &priv->regs->ctlr);
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	if (netif_running(ndev)) {
+		netif_device_attach(ndev);
+		netif_start_queue(ndev);
+	}
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rcar_can_pm_ops, rcar_can_suspend, rcar_can_resume);
+
+static struct platform_driver rcar_can_driver = {
+	.driver = {
+		.name = RCAR_CAN_DRV_NAME,
+		.owner = THIS_MODULE,
+		.pm = &rcar_can_pm_ops,
+	},
+	.probe = rcar_can_probe,
+	.remove = rcar_can_remove,
+};
+
+module_platform_driver(rcar_can_driver);
+
+MODULE_AUTHOR("Cogent Embedded, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CAN driver for Renesas R-Car SoC");
+MODULE_ALIAS("platform:" RCAR_CAN_DRV_NAME);
Index: linux-can-next/include/linux/can/platform/rcar_can.h
=================================--- /dev/null
+++ linux-can-next/include/linux/can/platform/rcar_can.h
@@ -0,0 +1,17 @@
+#ifndef _CAN_PLATFORM_RCAR_CAN_H_
+#define _CAN_PLATFORM_RCAR_CAN_H_
+
+#include <linux/types.h>
+
+/* Clock Select Register settings */
+enum CLKR {
+	CLKR_CLKP1 = 0,	/* Peripheral clock (clkp1) */
+	CLKR_CLKP2 = 1,	/* Peripheral clock (clkp2) */
+	CLKR_CLKEXT = 3	/* Externally input clock */
+};
+
+struct rcar_can_platform_data {
+	enum CLKR clock_select;	/* Clock source select */
+};
+
+#endif	/* !_CAN_PLATFORM_RCAR_CAN_H_ */

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-05-12 14:53 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-11 21:52 [PATCH v8] can: add Renesas R-Car CAN driver Sergei Shtylyov
2014-04-23 22:25 ` Sergei Shtylyov
2014-05-11 14:16   ` Sergei Shtylyov
2014-05-12 14:53 ` Marc Kleine-Budde

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).