* Ethernet bug at Upstream-v3.15-rcx on Lager.
@ 2014-05-15 6:28 カオ ミン ヒェップ
2014-05-15 17:20 ` Sergei Shtylyov
0 siblings, 1 reply; 6+ messages in thread
From: カオ ミン ヒェップ @ 2014-05-15 6:28 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: netdev, linux-sh, Magnus Damm, Simon Horman
Hi Sergei
I am Hiep from JINZAI SOLUTION (a Japanese Company).
Now, I am testing a upstream-v3.15-rc2 on Lager for Renesas RSO.
I found a problem about Ethernet Driver so I would like to report to you.
The problem is losing data when sending data by UDP:
- From Lager board to PC:
BANDWIDTH from 10M to 70M are good, but they suddenly down 51.2
Mbits/sec at 80M
and 57.8 Mbits/sec at 90 M and 64.2 Mbits/sec at 100M.
- From PC to Lager board:
Some time when the message of "sh-eth r8a7790-ether eth0: Receive
FIFO Overflow" occurs,
some of datagrams will be lost as the logs show below:
「$ iperf -c 172.16.1.36 -u -b 90M
.....
[ 3] Server Report:
[ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.000 ms
36/76923 (0.047%)
.....
# iperf -s -u
[ ID] Interval Transfer Bandwidth Jitter
Lost/Total Datagrams
sh-eth r8a7790-ether eth0: Receive FIFO Overflow
[ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.001 ms
36/76923 (0.047%)
Please review it when you have time.
Bests Regards,
Cao Minh Hiep.
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Ethernet bug at Upstream-v3.15-rcx on Lager.
2014-05-15 6:28 Ethernet bug at Upstream-v3.15-rcx on Lager カオ ミン ヒェップ
@ 2014-05-15 17:20 ` Sergei Shtylyov
2014-05-16 1:08 ` カオ ミン ヒェップ
0 siblings, 1 reply; 6+ messages in thread
From: Sergei Shtylyov @ 2014-05-15 17:20 UTC (permalink / raw)
To: cm-hiep; +Cc: netdev, linux-sh, Magnus Damm, Simon Horman
Hello.
On 05/15/2014 10:28 AM, カオ ミン ヒェップ wrote:
> I am Hiep from JINZAI SOLUTION (a Japanese Company).
> Now, I am testing a upstream-v3.15-rc2 on Lager for Renesas RSO.
> I found a problem about Ethernet Driver so I would like to report to you.
> The problem is losing data when sending data by UDP:
> - From Lager board to PC:
> BANDWIDTH from 10M to 70M are good, but they suddenly down 51.2
> Mbits/sec at 80M
> and 57.8 Mbits/sec at 90 M and 64.2 Mbits/sec at 100M.
Do you mean 'iperf' tests here?
> - From PC to Lager board:
> Some time when the message of "sh-eth r8a7790-ether eth0: Receive FIFO
> Overflow" occurs,
> some of datagrams will be lost as the logs show below:
> 「$ iperf -c 172.16.1.36 -u -b 90M
> .....
> [ 3] Server Report:
> [ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.000 ms 36/76923
> (0.047%)
> .....
> # iperf -s -u
> [ ID] Interval Transfer Bandwidth Jitter Lost/Total
> Datagrams
> sh-eth r8a7790-ether eth0: Receive FIFO Overflow
> [ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.001 ms 36/76923
> (0.047%)
> Please review it when you have time.
Please try this patch:
http://marc.info/?l=linux-netdev&m\x139602519809181
> Bests Regards,
> Cao Minh Hiep.
WBR, Sergei
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Ethernet bug at Upstream-v3.15-rcx on Lager.
2014-05-15 17:20 ` Sergei Shtylyov
@ 2014-05-16 1:08 ` カオ ミン ヒェップ
2014-05-16 5:56 ` Yoshihiro Shimoda
0 siblings, 1 reply; 6+ messages in thread
From: カオ ミン ヒェップ @ 2014-05-16 1:08 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: netdev, linux-sh, Magnus Damm, Simon Horman
Hi Sergei
Thanks for your replying!
On 05/16/2014 02:20 AM, Sergei Shtylyov wrote:
> Hello.
>
> On 05/15/2014 10:28 AM, カオ ミン ヒェップ wrote:
>
>> I am Hiep from JINZAI SOLUTION (a Japanese Company).
>> Now, I am testing a upstream-v3.15-rc2 on Lager for Renesas RSO.
>> I found a problem about Ethernet Driver so I would like to report to
>> you.
>> The problem is losing data when sending data by UDP:
>
>> - From Lager board to PC:
>> BANDWIDTH from 10M to 70M are good, but they suddenly down 51.2
>> Mbits/sec at 80M
>> and 57.8 Mbits/sec at 90 M and 64.2 Mbits/sec at 100M.
>
> Do you mean 'iperf' tests here?
Yes, I used 'iperf' tool to test here.
And the results of test these test-cases on upstream-v3.15-rc5 as show
below:
79.9 Mbits/sec at 80M, 81.5 Mbits/sec at 90 M and 75.1 Mbits/sec at 100M.
>
>> - From PC to Lager board:
>> Some time when the message of "sh-eth r8a7790-ether eth0: Receive
>> FIFO
>> Overflow" occurs,
>> some of datagrams will be lost as the logs show below:
>> 「$ iperf -c 172.16.1.36 -u -b 90M
>> .....
>> [ 3] Server Report:
>> [ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.000 ms
>> 36/76923
>> (0.047%)
>> .....
>> # iperf -s -u
>> [ ID] Interval Transfer Bandwidth Jitter
>> Lost/Total
>> Datagrams
>> sh-eth r8a7790-ether eth0: Receive FIFO Overflow
>> [ 3] 0.0-10.0 sec 108 MBytes 90.4 Mbits/sec 0.001 ms
>> 36/76923
>> (0.047%)
>
>> Please review it when you have time.
>
> Please try this patch:
>
> http://marc.info/?l=linux-netdev&m\x139602519809181
>
I have tested this patch on v3.15.0-rc5-00077-g14186fe, and results are
the message of
"sh-eth r8a7790-ether eth0: Receive FIFO Overflow" has disappeared and
sending datagrams is good.
(Bandwidth 10M to 100M: Test with 5/5 times by script and by hand are good)
Bests Regards.
Hiep.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Ethernet bug at Upstream-v3.15-rcx on Lager.
2014-05-16 1:08 ` カオ ミン ヒェップ
@ 2014-05-16 5:56 ` Yoshihiro Shimoda
2014-05-30 14:04 ` Ben Dooks
0 siblings, 1 reply; 6+ messages in thread
From: Yoshihiro Shimoda @ 2014-05-16 5:56 UTC (permalink / raw)
To: cm-hiep, ben.dooks
Cc: Sergei Shtylyov, netdev, linux-sh, Magnus Damm, Simon Horman
Hi Hiep-san,
(2014/05/16 10:08), カオ ミン ヒェップ wrote:
>>
>>> Please review it when you have time.
>>
>> Please try this patch:
>>
>> http://marc.info/?l=linux-netdev&m\x139602519809181
>>
> I have tested this patch on v3.15.0-rc5-00077-g14186fe, and results are the message of
> "sh-eth r8a7790-ether eth0: Receive FIFO Overflow" has disappeared and sending datagrams is good.
> (Bandwidth 10M to 100M: Test with 5/5 times by script and by hand are good)
>
It's nice!
So, I hope the patch is merged in upstream.
However, the patch's change log mentioned r8a7790 only.
The r8a7791's ethernet controller also has this bit.
To Ben,
So, would you update your patch and resubmit it?
Best regards,
Yoshihiro Shimoda
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Ethernet bug at Upstream-v3.15-rcx on Lager.
2014-05-16 5:56 ` Yoshihiro Shimoda
@ 2014-05-30 14:04 ` Ben Dooks
2014-06-03 2:43 ` Yoshihiro Shimoda
0 siblings, 1 reply; 6+ messages in thread
From: Ben Dooks @ 2014-05-30 14:04 UTC (permalink / raw)
To: Yoshihiro Shimoda, cm-hiep
Cc: Sergei Shtylyov, netdev, linux-sh, Magnus Damm, Simon Horman
On 16/05/14 06:56, Yoshihiro Shimoda wrote:
> Hi Hiep-san,
>
> (2014/05/16 10:08), カオ ミン ヒェップ wrote:
>>>
>>>> Please review it when you have time.
>>>
>>> Please try this patch:
>>>
>>> http://marc.info/?l=linux-netdev&m\x139602519809181
>>>
>> I have tested this patch on v3.15.0-rc5-00077-g14186fe, and results are the message of
>> "sh-eth r8a7790-ether eth0: Receive FIFO Overflow" has disappeared and sending datagrams is good.
>> (Bandwidth 10M to 100M: Test with 5/5 times by script and by hand are good)
>>
>
> It's nice!
> So, I hope the patch is merged in upstream.
> However, the patch's change log mentioned r8a7790 only.
> The r8a7791's ethernet controller also has this bit.
The bit update covers both of them as the r8a7790 and r8a7791 both share
the same configuration structure.
I re-sent the patch but didn't find your email post until after I had
sent it, otherwise I would have mentioned your testing specifically. In
future it would be helpful if you could do the following
- Mention driver by name in the subject line
- Search the list for previous mentions and reply to that/those threads.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Ethernet bug at Upstream-v3.15-rcx on Lager.
2014-05-30 14:04 ` Ben Dooks
@ 2014-06-03 2:43 ` Yoshihiro Shimoda
0 siblings, 0 replies; 6+ messages in thread
From: Yoshihiro Shimoda @ 2014-06-03 2:43 UTC (permalink / raw)
To: Ben Dooks, cm-hiep
Cc: Sergei Shtylyov, netdev, linux-sh, Magnus Damm, Simon Horman
Hi Ben,
(2014/05/30 23:04), Ben Dooks wrote:
> On 16/05/14 06:56, Yoshihiro Shimoda wrote:
>> Hi Hiep-san,
>>
>> (2014/05/16 10:08), カオ ミン ヒェップ wrote:
>>>>
>>>>> Please review it when you have time.
>>>>
>>>> Please try this patch:
>>>>
>>>> http://marc.info/?l=linux-netdev&m\x139602519809181
>>>>
>>> I have tested this patch on v3.15.0-rc5-00077-g14186fe, and results are the message of
>>> "sh-eth r8a7790-ether eth0: Receive FIFO Overflow" has disappeared and sending datagrams is good.
>>> (Bandwidth 10M to 100M: Test with 5/5 times by script and by hand are good)
>>>
>>
>> It's nice!
>> So, I hope the patch is merged in upstream.
>> However, the patch's change log mentioned r8a7790 only.
>> The r8a7791's ethernet controller also has this bit.
>
> The bit update covers both of them as the r8a7790 and r8a7791 both share
> the same configuration structure.
>
> I re-sent the patch but didn't find your email post until after I had
> sent it, otherwise I would have mentioned your testing specifically. In
> future it would be helpful if you could do the following
>
> - Mention driver by name in the subject line
> - Search the list for previous mentions and reply to that/those threads.
>
Thank you very much for the comment and your v2 patch!
I understood it.
Best regards,
Yoshihiro Shimoda
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-06-03 2:43 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-15 6:28 Ethernet bug at Upstream-v3.15-rcx on Lager カオ ミン ヒェップ
2014-05-15 17:20 ` Sergei Shtylyov
2014-05-16 1:08 ` カオ ミン ヒェップ
2014-05-16 5:56 ` Yoshihiro Shimoda
2014-05-30 14:04 ` Ben Dooks
2014-06-03 2:43 ` Yoshihiro Shimoda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).