* [PATCH 0/3] add support for the R-Car H2 and M2 xHCI controllers
@ 2014-05-19 10:07 Yoshihiro Shimoda
0 siblings, 0 replies; only message in thread
From: Yoshihiro Shimoda @ 2014-05-19 10:07 UTC (permalink / raw)
To: mathias.nyman-ral2JQCrhuEAvxtiuMwx3w, Greg Kroah-Hartman,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: SH-Linux, Magnus Damm, Geert Uytterhoeven, Grant Likely,
Rob Herring, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
This patch set adds the USB xHCI support for the R-Car H2 and M2 SoCs.
These SoCs use an xHCI but still need specific initialization, mainly
to setup the firmware downloading and the specific registers.
This patch set depends on the following patches:
http://marc.info/?l=linux-usb&m\x140014937401793&w=2
http://marc.info/?l=linux-usb&m\x140014935801786&w=2
http://marc.info/?l=linux-usb&m\x140014933101775&w=2
http://marc.info/?l=linux-usb&m\x140014932301770&w=2
However, this patch set doesn't depend on the following patch because
this patch set uses the "USB phy", not "phy":
http://marc.info/?l=linux-usb&m\x140025742005303&w=2
Yoshihiro Shimoda (3):
usb: host: xhci-plat: add xhci_plat_start()
usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI
controllers
Documentation: dt-bindings: update xhci-platform DT binding for R-Car
Gen2
Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +-
drivers/usb/host/Kconfig | 8 +
drivers/usb/host/Makefile | 3 +
drivers/usb/host/xhci-plat.c | 25 ++-
drivers/usb/host/xhci-rcar.c | 187 ++++++++++++++++++++
drivers/usb/host/xhci-rcar.h | 37 ++++
6 files changed, 261 insertions(+), 2 deletions(-)
create mode 100644 drivers/usb/host/xhci-rcar.c
create mode 100644 drivers/usb/host/xhci-rcar.h
--
1.7.9.5
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-05-19 10:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-19 10:07 [PATCH 0/3] add support for the R-Car H2 and M2 xHCI controllers Yoshihiro Shimoda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).