From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: SH-Linux <linux-sh@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Grant Likely <grant.likely@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>
Subject: [PATCH 1/2] usb: renesas_usbhs: Add device tree bindings documentation
Date: Fri, 01 Aug 2014 11:49:14 +0000 [thread overview]
Message-ID: <53DB7EBA.3080004@renesas.com> (raw)
Document the device tree bindings for the Renesas USBHS controller.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
.../devicetree/bindings/usb/renesas_usbhs.txt | 24 ++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/renesas_usbhs.txt
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
new file mode 100644
index 0000000..e9faa65
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -0,0 +1,24 @@
+Renesas Electronics USBHS driver
+
+Required properties:
+ - compatible: Must contain one of the following:
+ - "renesas,usbhs-r8a7790"
+ - "renesas,usbhs-r8a7791"
+ - reg: Base address and length of the register for the USBHS
+ - interrupts: Interrupt specifier for the USBHS
+ - clocks: A list of phandle + clock specifier pairs
+
+Optional properties:
+ - buswait_bwait: Integer to use BUSWAIT register
+ - enable-gpio: A gpio specifier to check GPIO determining if USB function
+ should be enabled
+ - phys: phandle + phy specifier pair
+ - phy-names: must be "usb"
+
+Example:
+ usbhs: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7790";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ };
--
1.7.9.5
next reply other threads:[~2014-08-01 11:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-01 11:49 Yoshihiro Shimoda [this message]
[not found] ` <53DB7EBA.3080004-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2014-08-01 13:35 ` [PATCH 1/2] usb: renesas_usbhs: Add device tree bindings documentation Sergei Shtylyov
2014-08-04 4:24 ` Yoshihiro Shimoda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53DB7EBA.3080004@renesas.com \
--to=yoshihiro.shimoda.uh@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).