From: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH RFC 0/7] ARM: shmobile: Support L2 shutdown mode in Suspend-to-RAM
Date: Fri, 26 Sep 2014 11:12:37 +0000 [thread overview]
Message-ID: <54254A25.7040407@renesas.com> (raw)
In-Reply-To: <5424D1ED.6070309@renesas.com>
On 9/26/2014 7:20 PM, Khiem Nguyen wrote:
> Hi Geert-san,
>
> On 9/26/2014 7:04 PM, Geert Uytterhoeven wrote:
>> Hi Khiem-san,
>>
>> On Fri, Sep 26, 2014 at 4:39 AM, Khiem Nguyen
>> <khiem.nguyen.xt@renesas.com> wrote:
>>> These patches implement L2 shutdown mode in RCar Gen2 SoC and change
>>> Suspend-to-RAM from Core Standby mode to L2 shutdown mode.
>>> The impact to CPUIdle operation was also put into consideration during
>>> implementation.
>>>
>>> I have confirmed Suspend-to-RAM in Lager board and Koelsch board.
>>> So far, there is no regression detected during my testing.
>>> There might be further patches to support Alt board. But it would be
>>> after upstream kernel can boot up in Alt board.
>>>
>>> I hope to receive some comments for this patch series whether it's
>>> right direction or not. Therefore, I marked it with RFC.
>>> Any comments are appreciated.
>>
>> While testing with various combinations of CONFIG_PM options, I noticed
>> the build fails if CONFIG_ARM_CPU_SUSPEND is not set:
>>
>> arch/arm/mach-shmobile/built-in.o: In function
>> `shmobile_smp_apmu_enter_cpuidle':
>> :(.text+0x27c): undefined reference to `cpu_suspend'
>> arch/arm/mach-shmobile/built-in.o: In function `shmobile_cpuidle_notifier_call':
>> :(.text+0x305c): undefined reference to `cpu_resume'
>> arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_apmu_prepare_cpus':
>> :(.init.text+0xddc): undefined reference to `cpu_resume'
>> arch/arm/mach-shmobile/built-in.o: In function `shmobile_cpuidle_init':
>> :(.init.text+0xe9c): undefined reference to `cpu_resume'
>> make[3]: *** [vmlinux] Error 1
>> make[2]: *** [sub-make] Error 2
>> make[1]: *** [__sub-make] Error 2
>> make: *** [all] Error 2
>>
> That is interesting build error.
> To make it clearer and able to fix it, please kindly confirm below points:
> 1. This only occurred after merging my patch ?
> (The part related to shmobile_cpuidle_init seems out of my scope.)
> 2. What kind of 'various combinations of CONFIG_PM options' were you select ?
To answer my own questions,
1. The build error occurred /after/ merging CPUIdle patches from Kobayashi-san.
2. If CONFIG_SUSPEND is disabled (and CPUIdle patches was merged),
this build error occurred.
(CONFIG_ARM_CPU_SUSPEND has dependency on CONFIG_SUSPEND)
@Kobayashi-san,
Please take care of this build error in your V2 patches.
Thanks.
>
> Thanks.
>
>> Gr{oetje,eeting}s,
>>
>> Geert
>>
>> --
>> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>>
>> In personal conversations with technical people, I call myself a hacker. But
>> when I'm talking to journalists I just say "programmer" or something like that.
>> -- Linus Torvalds
>>
>
--
Best regards,
KHIEM Nguyen
prev parent reply other threads:[~2014-09-26 11:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-26 2:39 [PATCH RFC 0/7] ARM: shmobile: Support L2 shutdown mode in Suspend-to-RAM Khiem Nguyen
2014-09-26 10:04 ` Geert Uytterhoeven
2014-09-26 10:20 ` Khiem Nguyen
2014-09-26 11:12 ` Khiem Nguyen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54254A25.7040407@renesas.com \
--to=khiem.nguyen.xt@renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).