From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
horms@verge.net.au, magnus.damm@gmail.com, robh+dt@kernel.org,
pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linux@arm.linux.org.uk
Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
linux-sh@vger.kernel.org
Subject: Re: [PATCH v2 2/2] arm: shmobile: lager: enable HS-USB
Date: Tue, 07 Oct 2014 19:15:50 +0000 [thread overview]
Message-ID: <54343BE6.2020903@cogentembedded.com> (raw)
In-Reply-To: <5433DA52.2020005@renesas.com>
Hello.
On 10/07/2014 04:19 PM, Yoshihiro Shimoda wrote:
>>> Since this board doesn't have USB ID pin, we assumes the GP5_18 (USB0_PWEN)
>>> is an ID pin because the gpio is high when the SW5 is Pin 3 side.
>>> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
>>> ---
>>> arch/arm/boot/dts/r8a7790-lager.dts | 5 +++++
>>> 1 file changed, 5 insertions(+)
>>> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
>>> index 719979e..011254a 100644
>>> --- a/arch/arm/boot/dts/r8a7790-lager.dts
>>> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
>>> @@ -446,3 +446,8 @@
>>> };
>>> };
>>> };
>>> +
>>> +&hsusb {
>>> + status = "okay";
>>> + renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
>>> +};
>> As I said before, this is not enough. We need pinctrl-related props. Same is true for other boards.
> Thank you very much for the point again.
> Finally I understood what you said before.
> I will start studying the pinctrl world.
Looks like it will be quicker if I post v3 of your patches.
Unfortunately, there'll be pinctrl-related error messages in the log if
the internal PCI and HS-USB drivers are enabled together but everything should
still work.
> Best regards,
> Yoshihiro Shimoda
WBR, Sergei
prev parent reply other threads:[~2014-10-07 19:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-07 11:10 [PATCH v2 0/2] arm: shimobile: add HS-USB device node on r8a7790 Yoshihiro Shimoda
2014-10-07 11:10 ` [PATCH v2 1/2] arm: shmobile: r8a7790: add HS-USB device node Yoshihiro Shimoda
[not found] ` <1412680220-4552-1-git-send-email-yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2014-10-07 11:10 ` [PATCH v2 2/2] arm: shmobile: lager: enable HS-USB Yoshihiro Shimoda
2014-10-07 11:42 ` Sergei Shtylyov
2014-10-07 12:19 ` Yoshihiro Shimoda
2014-10-07 19:15 ` Sergei Shtylyov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54343BE6.2020903@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=horms@verge.net.au \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-sh@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).