Re: Can't boot kernel v4.0-rc2 on Koelsch

[Cao Minh Hiep <cm-hiep@jinso.co.jp>]

Hi Geert-san
Thanks for you comments,

On 2015年03月10日 20:32, Geert Uytterhoeven wrote:
> Hi Hiep-san,
>
> On Tue, Mar 10, 2015 at 10:03 AM, Cao Minh Hiep <cm-hiep@jinso.co.jp> wrote:
>> On 2015年03月10日 17:05, Nobuhiro Iwamatsu wrote:
>>> This is user land issue.
>>> Hiep, if you have not changed ttySCX in inittab, you will need to change.
>>> Could you check your inittab?
>>>
>>> --- a/inittab    2015-03-10 15:01:58.986609389 +0900
>>> +++ b/inittab    2015-03-10 15:00:32.132094877 +0900
>>> @@ -28,7 +28,7 @@
>>>    l6:6:wait:/etc/init.d/rc 6
>>>    # Normally not reached, but fallthrough in case of emergency.
>>>    z6:6:respawn:/sbin/sulogin
>>> -SC6:12345:respawn:/sbin/getty -L 38400 ttySC6
>>> +SC0:12345:respawn:/sbin/getty -L 38400 ttySC0
>>>    # /sbin/getty invocations for the runlevels.
>>>    #
>>>    # The "id" field MUST be the same as the last
>> There is no inittab file in Linaro userland that I am using.
> I'm not familiar with the Linaro userland.
>
> Is there any other configuration file that contains the string "ttySC6"?
> Or does the Linaro userland derive it from the kernel command line?
> If yes, perhaps there's a newer version that does look at stdout-path instead?
There is not any configuration file that contains ttySC6's string,
I think the Linaro userland drive it from the kernel command line.

> The goal of the stdout-path support was to have a better description in DT
> and automate things. So I don't think reverting the change is the proper way
> forward.
Thanks for your explanation

> If you can't get it to work, I think we should bring it up with the DT people
> first, some of which work for Linaro.
Now, I am trying to boot with other version of Linaro Userland.
Next, I am going to find other setting of userland or uboot in order to 
boot with current kernel version.
if impossible,firstly I am also thinking of changing other Userland 
(Yocto or Debian).

Best Regards,
Hiep.