From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Date: Mon, 13 Jul 2015 10:17:20 +0000 Subject: Re: [PATCH v3] phy: rcar-gen2 usb: Add Host/Function switching for USB0 Message-Id: <55A39030.1030601@cogentembedded.com> List-Id: References: <1436270121-25924-1-git-send-email-phil.edworthy@renesas.com> <559FF47A.5000001@cogentembedded.com> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Phil Edworthy , Kishon Vijay Abraham I Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Yoshihiro Shimoda , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" Hello. On 7/13/2015 12:04 PM, Phil Edworthy wrote: >>> Instead of statically selecting the PHY connection to either the >>> USBHS (Function) or PCI0 (Host) IP blocks, this change allows the >>> dts to specifiy gpio pins for the vbus and id signals. Additional >> These GPIOs don't have anything to do with the PHY, they're interfacing Perhaps that was too strong statement but nevertheless... >> Maxim MAX3355 OTG chip for which I have submitted the extcon driver. > Hmm, I see what you mean... could you post your latest version of that > driver as it seems to have stalled 6 months ago? I haven't worked on that driver since then. > Thanks > Phil WBR, Sergei