From mboxrd@z Thu Jan  1 00:00:00 1970
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 17 Sep 2014 14:40:07 +0000
Subject: Re: [PATCH] ARM: shmobile: r8a7790: switch from scif to scifa
Message-Id: <6272980.nZASeRAm1h@avalon>
List-Id: <linux-sh.vger.kernel.org>
References: <1410883837-5611-1-git-send-email-wsa@the-dreams.de>
In-Reply-To: <1410883837-5611-1-git-send-email-wsa@the-dreams.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-sh@vger.kernel.org

Hi Wolfram,

On Tuesday 16 September 2014 18:10:37 Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> SCIF and SCIFA can be plexed onto the same wires on Lager board. The
> datasheet also describes the wires as SCIFA. So, to make use of the
> bigger FIFOs switch to SCIFA instead.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Currently, I use this patch to check if the DMA RX issue is the same on SCIF
> and SCIFA (yes, it is). However, I still think it makes sense to use the
> bigger FIFOs. I will check this next week with Bastian's FIFO patches.
> Until then, I send this as RFC to collect opinions speaking for/against
> this change.

I have nothing against this change, but I believe the aliases should now be 
serial0 and serial1 to match the legacy code (OK, that's a lame excuse, we all 
know that I just want to change the aliases ;-)).

>  arch/arm/boot/dts/r8a7790-lager.dts | 24 ++++++++++++------------
>  1 file changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts
> b/arch/arm/boot/dts/r8a7790-lager.dts index 84dcafa7179b..782f0aa938b3
> 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -19,8 +19,8 @@
>  	compatible = "renesas,lager", "renesas,r8a7790";
> 
>  	aliases {
> -		serial6 = &scif0;
> -		serial7 = &scif1;
> +		serial6 = &scifa0;
> +		serial7 = &scifa1;
>  	};
> 
>  	chosen {
> @@ -159,9 +159,9 @@
>  		renesas,function = "du";
>  	};
> 
> -	scif0_pins: serial0 {
> -		renesas,groups = "scif0_data";
> -		renesas,function = "scif0";
> +	scifa0_pins: serial0 {
> +		renesas,groups = "scifa0_data";
> +		renesas,function = "scifa0";
>  	};
> 
>  	ether_pins: ether {
> @@ -174,9 +174,9 @@
>  		renesas,function = "intc";
>  	};
> 
> -	scif1_pins: serial1 {
> -		renesas,groups = "scif1_data";
> -		renesas,function = "scif1";
> +	scifa1_pins: serial1 {
> +		renesas,groups = "scifa1_data";
> +		renesas,function = "scifa1";
>  	};
> 
>  	sdhi0_pins: sd0 {
> @@ -308,15 +308,15 @@
>  	};
>  };
> 
> -&scif0 {
> -	pinctrl-0 = <&scif0_pins>;
> +&scifa0 {
> +	pinctrl-0 = <&scifa0_pins>;
>  	pinctrl-names = "default";
> 
>  	status = "okay";
>  };
> 
> -&scif1 {
> -	pinctrl-0 = <&scif1_pins>;
> +&scifa1 {
> +	pinctrl-0 = <&scifa1_pins>;
>  	pinctrl-names = "default";
> 
>  	status = "okay";

-- 
Regards,

Laurent Pinchart