From: Thomas Gleixner <tglx@linutronix.de>
To: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>,
Yoshinori Sato <ysato@users.sourceforge.jp>,
linux-sh@vger.kernel.org
Cc: maz@kernel.org
Subject: Re: [RFC PATCH v3 16/35] drivers/irqchip: SH7751 IRL external encoder with enable gate.
Date: Mon, 16 Oct 2023 23:55:46 +0200 [thread overview]
Message-ID: <875y366xlp.ffs@tglx> (raw)
In-Reply-To: <66f918fd93b7a98a548bd95de615353a43d1cbd1.camel@physik.fu-berlin.de>
On Mon, Oct 16 2023 at 20:50, John Paul Adrian Glaubitz wrote:
> On Mon, 2023-10-16 at 20:46 +0200, Thomas Gleixner wrote:
>> > --- a/drivers/irqchip/Kconfig
>> > +++ b/drivers/irqchip/Kconfig
>> > @@ -688,4 +688,11 @@ config RENESAS_SH7751_INTC
>> > Support for the Renesas SH7751 On-chip interrupt controller.
>> > And external interrupt encoder for some targets.
>>
>> ... I have no idea against which tree this is supposed to apply. None of
>> the trees I usually use has the above. So I assume it's a patch in the
>> same series, but what do I know.
>
> This shall eventually go through my sh-linux tree [1].
That's an actual tree management problem, which is completely
independent of the review process.
Reviewing patches which depend on "unknown" other changes is per
definition impossible and in this case it's even worse because the
dependency affects the same subsystem, no?
Thanks,
tglx
next prev parent reply other threads:[~2023-10-16 21:55 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-14 14:53 [RFC PATCH v3 00/35] Device Tree support for SH7751 based board Yoshinori Sato
2023-10-14 14:53 ` [RFC PATCH v3 01/35] arch/sh/boot/compressed/head_32.S: passing FDT address to initialize function Yoshinori Sato
2023-10-14 17:11 ` Sergei Shtylyov
2023-10-14 14:53 ` [RFC PATCH v3 02/35] arch/sh/boards/Kconfig: unified OF supported targets Yoshinori Sato
2023-10-14 14:53 ` [RFC PATCH v3 03/35] arch/sh: Disable SH specific modules in OF enabled Yoshinori Sato
2023-10-14 14:53 ` [RFC PATCH v3 04/35] include/linux/sh_intc.h: Add stub function "intc_finalize" Yoshinori Sato
2023-10-14 14:53 ` [RFC PATCH v3 05/35] arch/sh/kernel/setup.c: Update DT support Yoshinori Sato
2023-10-19 10:01 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 06/35] arch/sh/boards/of-generic.c: some cleanup Yoshinori Sato
2023-10-18 18:37 ` Geert Uytterhoeven
2023-10-26 3:40 ` Yoshinori Sato
2023-10-26 7:20 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 07/35] arch/sh/kernel/time.c: support COMMON_CLK Yoshinori Sato
2023-10-14 14:53 ` [RFC PATCH v3 08/35] arch/sh/include/asm: Disable SH specific PCI define in OF enabled Yoshinori Sato
2023-10-14 14:53 ` [RFC PATCH v3 09/35] drivers/pci/controller: SH7751 PCI Host bridge driver Yoshinori Sato
2023-10-16 17:27 ` Bjorn Helgaas
2023-10-16 19:52 ` Bjorn Helgaas
2023-10-14 14:53 ` [RFC PATCH v3 10/35] Documentation/devicetree/bindings/pci: renesas,pci-sh7751.yaml new file Yoshinori Sato
2023-10-16 5:28 ` Krzysztof Kozlowski
2023-10-16 11:55 ` Krzysztof Kozlowski
2023-10-14 14:53 ` [RFC PATCH v3 11/35] include/dt-bindings/clock/sh7750.h: cpg-sh7750 binding header Yoshinori Sato
2023-10-18 13:49 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 12/35] drivers/clk/renesas: clk-sh7750.c SH7750/7751 CPG driver Yoshinori Sato
2023-10-18 13:02 ` Geert Uytterhoeven
2023-10-19 7:18 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 13/35] Documentation/devicetree/bindings/clock: Add renesas,sh7750-cpg binding document Yoshinori Sato
2023-10-18 13:41 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 14/35] drivers/irqchip: Add SH7751 Internal INTC drivers Yoshinori Sato
2023-10-17 9:27 ` Geert Uytterhoeven
2023-10-18 8:02 ` Thomas Gleixner
2023-10-18 8:18 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 15/35] Documentation/devicetree/bindings/interrupt-controller: Add renesas,sh7751-intc.yaml Yoshinori Sato
2023-10-19 11:29 ` Geert Uytterhoeven
2023-10-19 11:38 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 16/35] drivers/irqchip: SH7751 IRL external encoder with enable gate Yoshinori Sato
2023-10-16 18:46 ` Thomas Gleixner
2023-10-16 18:50 ` John Paul Adrian Glaubitz
2023-10-16 21:55 ` Thomas Gleixner [this message]
2023-10-17 16:33 ` Thomas Gleixner
2023-10-14 14:53 ` [RFC PATCH v3 17/35] Documentation/devicetree/bindings/interrupt-controller: Add renesas,sh7751-irl-ext.yaml Yoshinori Sato
2023-10-14 14:53 ` [RFC PATCH v3 18/35] drivers/tty/serial: sh-sci.c fix SH4 OF support Yoshinori Sato
2023-10-18 8:23 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 19/35] Documentation/devicetree/bindings/serial: renesas,scif.yaml Add SH Yoshinori Sato
2023-10-18 14:04 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 20/35] drivers/mfd: sm501 add some properties Yoshinori Sato
2023-10-19 11:55 ` Lee Jones
2023-10-14 14:53 ` [RFC PATCH v3 21/35] devicetree/binding/display/sm501fb.txt: sm501fb add properies Yoshinori Sato
2023-10-14 14:53 ` [RFC PATCH v3 22/35] drivers/clocksource/sh_tmu: Add support CLOCKSOURCE Yoshinori Sato
2023-10-18 16:04 ` Geert Uytterhoeven
2023-10-23 11:40 ` Yoshinori Sato
2023-10-14 14:53 ` [RFC PATCH v3 23/35] Documentation/devicetree/bindings/timer: renesas,tmu.yaml add SH Yoshinori Sato
2023-10-18 19:40 ` Geert Uytterhoeven
2023-10-14 14:53 ` [RFC PATCH v3 24/35] include/dt-binding/interrupt-controller/sh_intc.h: renesas,sh7751-intc.h helper Yoshinori Sato
2023-10-18 13:39 ` Geert Uytterhoeven
2023-10-18 14:03 ` Krzysztof Kozlowski
2023-10-14 14:54 ` [RFC PATCH v3 25/35] Documentation/devicetree/bindings/sh/cpus.yaml: Add SH CPU Yoshinori Sato
2023-10-18 14:27 ` Geert Uytterhoeven
2023-10-25 11:14 ` Yoshinori Sato
2023-10-25 11:33 ` D. Jeff Dionne
2023-10-25 12:04 ` Geert Uytterhoeven
2023-10-25 12:10 ` D. Jeff Dionne
2023-10-25 12:17 ` Geert Uytterhoeven
2023-10-25 12:34 ` D. Jeff Dionne
2023-10-25 12:07 ` Yoshinori Sato
2023-10-25 12:01 ` Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 26/35] arch/sh/boot/dts: SH7751R SoC Internal peripheral definition dtsi Yoshinori Sato
2023-10-19 12:18 ` Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 27/35] Documentation/devicetree/bindings: vendor-prefix add IO DATA DEVICE Inc Yoshinori Sato
2023-10-18 18:43 ` Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 28/35] Documentation/devicetree/bindings/ata: ata-generic.yaml add usl-5p and rts7751r2d Yoshinori Sato
2023-10-15 22:25 ` Damien Le Moal
2023-10-14 14:54 ` [RFC PATCH v3 29/35] Documentation/devicetree/bindings/soc/renesas/sh.yaml: Add SH7751 based target Yoshinori Sato
2023-10-18 18:48 ` Geert Uytterhoeven
2023-10-18 18:49 ` Geert Uytterhoeven
2023-10-18 19:44 ` Geert Uytterhoeven
2023-10-25 11:58 ` Yoshinori Sato
2023-10-25 12:05 ` Yoshinori Sato
2023-10-14 14:54 ` [RFC PATCH v3 30/35] arch/sh/boot/dts: RTS7751R2D Plus DeviceTree Yoshinori Sato
2023-10-19 12:13 ` Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 31/35] arch/sh/boot/dts: LANDISK DeviceTree Yoshinori Sato
2023-10-19 12:14 ` Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 32/35] arch/sh/boot/dts: USL-5P DeviceTree Yoshinori Sato
2023-10-14 14:54 ` [RFC PATCH v3 33/35] arch/sh: Add dtbs target support Yoshinori Sato
2023-10-19 11:54 ` Geert Uytterhoeven
2023-10-14 14:54 ` [RFC PATCH v3 34/35] arch/sh: RTS7751R2D Plus OF defconfig Yoshinori Sato
2023-10-14 14:54 ` [RFC PATCH v3 35/35] arch/sh/configs: LANDISK " Yoshinori Sato
2023-11-07 10:23 ` [RFC PATCH v3 00/35] Device Tree support for SH7751 based board John Paul Adrian Glaubitz
2023-11-08 7:57 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=875y366xlp.ffs@tglx \
--to=tglx@linutronix.de \
--cc=glaubitz@physik.fu-berlin.de \
--cc=linux-sh@vger.kernel.org \
--cc=maz@kernel.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox