From: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 1/2 v4] ARM: shmobile: lager: add SDHI0/2 support
Date: Thu, 13 Feb 2014 05:42:52 +0000 [thread overview]
Message-ID: <8761ojd0vb.wl%kuninori.morimoto.gx@gmail.com> (raw)
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
SDHI0 (CN8) needs JP/SW settings
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v3 -> v4
- no change
arch/arm/mach-shmobile/board-lager.c | 64 ++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 3175748..90d7e81 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -26,8 +26,10 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/leds.h>
+#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/gpio-rcar.h>
@@ -68,6 +70,19 @@
* # amixer set "LINEOUT Mixer DACL" on
*/
+/*
+ * SDHI0 (CN8)
+ *
+ * JP3: pin1
+ * SW20: pin1
+
+ * GP5_24: 1: VDD 3.3V (defult)
+ * 0: VDD 0.0V
+ * GP5_29: 1: VccQ 3.3V (defult)
+ * 0: VccQ 1.8V
+ *
+ */
+
/* DU */
static struct rcar_du_encoder_data lager_du_encoders[] = {
{
@@ -595,6 +610,34 @@ static void __init lager_add_rsnd_device(void)
platform_device_register_full(&cardinfo);
}
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_POWER_OFF_CARD,
+ .tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
+ TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi0_resources[] __initdata = {
+ DEFINE_RES_MEM(0xee100000, 0x200),
+ DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_POWER_OFF_CARD,
+ .tmio_caps2 = MMC_CAP2_NO_MULTI_READ,
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
+ TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi2_resources[] __initdata = {
+ DEFINE_RES_MEM(0xee140000, 0x100),
+ DEFINE_RES_IRQ(gic_spi(167)),
+};
+
static const struct pinctrl_map lager_pinctrl_map[] = {
/* DU (CN10: ARGB0, CN13: LVDS) */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
@@ -612,6 +655,20 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
"scif1_data", "scif1"),
+ /* SDHI0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+ "sdhi0_data4", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+ "sdhi0_ctrl", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+ "sdhi0_cd", "sdhi0"),
+ /* SDHI2 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+ "sdhi2_data4", "sdhi2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+ "sdhi2_ctrl", "sdhi2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+ "sdhi2_cd", "sdhi2"),
/* SSI (CN17: sound) */
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
"ssi0129_ctrl", "ssi"),
@@ -716,6 +773,13 @@ static void __init lager_add_standard_devices(void)
lager_register_usbhs();
lager_add_rsnd_device();
+
+ platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+ sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+ &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
+ platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2,
+ sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
+ &sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
}
/*
--
1.7.9.5
next reply other threads:[~2014-02-13 5:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-13 5:42 Kuninori Morimoto [this message]
2014-02-13 5:51 ` [PATCH 1/2 v4] ARM: shmobile: lager: add SDHI0/2 support Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8761ojd0vb.wl%kuninori.morimoto.gx@gmail.com \
--to=kuninori.morimoto.gx@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox