From: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Simon <horms@verge.net.au>, Chris Ball <cjb@laptop.org>,
Magnus <magnus.damm@gmail.com>,
Linux-SH <linux-sh@vger.kernel.org>,
goda <yusuke.goda.sx@renesas.com>,
Linux MMC List <linux-mmc@vger.kernel.org>
Subject: Re: [PATCH 1/5] mmc: shmobile: add renesas,sdhi-rcar-gen1/gen2 in DT compatible
Date: Tue, 05 Aug 2014 23:45:06 +0000 [thread overview]
Message-ID: <87a97ilcw3.wl%kuninori.morimoto.gx@gmail.com> (raw)
In-Reply-To: <CAMuHMdWrbT2vvn+H=R1QhoUNzyPDUFoYMsPjtFW2sPOkVyCScw@mail.gmail.com>
Hi Geert
> > From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> >
> > This patch adds DT compatible for Renesas R-Car Gen1/Gen2.
> > Current driver has SoC level .compatible
> > (r8a7778/r8a7779/r8a7790/r8a7791),
> > but these can be match as generation level.
> >
> > Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> > ---
> > drivers/mmc/host/sh_mobile_sdhi.c | 2 ++
> > 1 file changed, 2 insertions(+)
>
> I think you should also update
> Documentation/devicetree/bindings/mmc/tmio_mmc.txt
Indeed, thanks
Will do in v2
Best regards
---
Kuninori Morimoto
next prev parent reply other threads:[~2014-08-05 23:45 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <d3d6aa34548248768494ad88056cf4bd@SINPR06MB105.apcprd06.prod.outlook.com>
[not found] ` <87simtenpi.wl%kuninori.morimoto.gx@renesas.com>
[not found] ` <cb608c5e763f47b597936724ec05b615@SINPR06MB105.apcprd06.prod.outlook.com>
[not found] ` <87pphxe2q0.wl%kuninori.morimoto.gx@renesas.com>
[not found] ` <53AD638C.5060907@renesas.com>
2014-07-22 5:30 ` [PATCH 0/10][RFC] mmc: tmio: fixup patches Kuninori Morimoto
2014-07-22 5:33 ` [PATCH 01/10] mmc: sh_mobile_sdhi: Add EXT_ACC register busy check Kuninori Morimoto
2014-07-22 12:39 ` Sergei Shtylyov
2014-07-22 23:51 ` Kuninori Morimoto
2014-07-22 5:34 ` [PATCH 02/10] mmc: block: add block number limitation flag for multiple block read Kuninori Morimoto
2014-07-22 5:34 ` [PATCH 03/10] mmc: tmio: care about DMA tx/rx addr offset Kuninori Morimoto
2014-07-22 5:34 ` [PATCH 04/10] mmc: tmio: clear error IRQ status Kuninori Morimoto
2014-07-22 5:34 ` [PATCH 05/10] mmc: tmio: control multiple block transfer mode Kuninori Morimoto
2014-07-22 5:34 ` [PATCH 06/10] mmc: tmio: add TMIO_MMC_SDIO_STATUS_QUIRK Kuninori Morimoto
2014-07-22 5:34 ` [PATCH 07/10] mmc: tmio: check ILL_FUNC instead of CBSY Kuninori Morimoto
2014-07-22 5:34 ` [PATCH 08/10] mmc: tmio: remove Renesas specific #ifdef Kuninori Morimoto
2014-07-22 5:35 ` [PATCH 09/10] mmc: tmio: remove SCLKEN bit setting from tmio_mmc_set_clock() Kuninori Morimoto
2014-07-22 5:35 ` [PATCH 10/10] mmc: tmio: add actual clock support as option Kuninori Morimoto
2014-07-29 8:42 ` [PATCH 0/10 v2] mmc: tmio: fixup patches Kuninori Morimoto
2014-07-29 8:44 ` [PATCH 01/10 v2] mmc: block: add block number limitation flag for multiple block read Kuninori Morimoto
2014-07-31 6:14 ` [Bug] mmc: MMC and SDHI has a kernel panic error when transfer data カオ ミン ヒェップ
2014-07-29 8:44 ` [PATCH 02/10 v2] mmc: tmio: care about DMA tx/rx addr offset Kuninori Morimoto
2014-07-29 8:44 ` [PATCH 03/10 v2] mmc: tmio: clear error IRQ status Kuninori Morimoto
2014-07-29 8:45 ` [PATCH 04/10 v2] mmc: tmio: control multiple block transfer mode Kuninori Morimoto
2014-07-29 8:45 ` [PATCH 05/10 v2] mmc: tmio: add TMIO_MMC_SDIO_STATUS_QUIRK Kuninori Morimoto
2014-07-29 8:46 ` [PATCH 06/10 v2] mmc: tmio: check ILL_FUNC instead of CBSY Kuninori Morimoto
2014-07-29 8:46 ` [PATCH 07/10 v2] mmc: tmio: remove Renesas specific #ifdef Kuninori Morimoto
2014-07-29 8:47 ` [PATCH 08/10 v2] mmc: tmio: remove SCLKEN bit setting from tmio_mmc_set_clock() Kuninori Morimoto
2014-07-29 8:47 ` [PATCH 09/10 v2] mmc: tmio: ensure that the clock has been stopped before set_clock Kuninori Morimoto
2014-07-29 8:47 ` [PATCH 10/10 v2] mmc: tmio: add actual clock support as option Kuninori Morimoto
2014-07-30 0:45 ` [PATCH 0/10 v2] mmc: tmio: fixup patches Simon Horman
2014-07-31 1:52 ` カオ ミン ヒェップ
2014-07-31 2:30 ` Simon Horman
2014-07-31 4:27 ` カオ ミン ヒェップ
2014-07-31 4:30 ` Simon Horman
2014-07-31 4:34 ` Kuninori Morimoto
2014-07-31 5:05 ` カオ ミン ヒェップ
2014-08-05 3:16 ` [PATCH 1/5] mmc: shmobile: add renesas,sdhi-rcar-gen1/gen2 in DT compatible Kuninori Morimoto
2014-08-05 6:59 ` Geert Uytterhoeven
2014-08-05 23:45 ` Kuninori Morimoto [this message]
2014-08-05 3:17 ` [PATCH 2/5] ARM: shmobile: r8a7778: add generation level compatible for SDHI Kuninori Morimoto
2014-08-05 3:17 ` [PATCH 3/5] ARM: shmobile: r8a7779: " Kuninori Morimoto
2014-08-05 3:17 ` [PATCH 4/5] ARM: shmobile: r8a7790: " Kuninori Morimoto
2014-08-05 3:17 ` [PATCH 5/5] ARM: shmobile: r8a7791: " Kuninori Morimoto
2014-08-06 1:47 ` [PATCH 0/5 v2] mmc: shmobile: adds generatoin level DT compatible Kuninori Morimoto
2014-08-06 1:48 ` [PATCH 1/5 v2] mmc: shmobile: add renesas,sdhi-rcar-gen1/gen2 in " Kuninori Morimoto
2014-08-07 0:43 ` Simon Horman
2014-08-06 1:49 ` [PATCH 2/5 v2] ARM: shmobile: r8a7778: add generation level compatible for SDHI Kuninori Morimoto
2014-08-06 1:49 ` [PATCH 3/5 v2] ARM: shmobile: r8a7779: " Kuninori Morimoto
2014-08-06 1:49 ` [PATCH 4/5 v2] ARM: shmobile: r8a7790: " Kuninori Morimoto
2014-08-06 1:50 ` [PATCH 5/5 v2] ARM: shmobile: r8a7791: " Kuninori Morimoto
2014-08-22 8:35 ` [PATCH 0/10 v2 resend] mmc: tmio: fixup patches Kuninori Morimoto
2014-08-22 8:36 ` [PATCH 01/10 v2 resend] mmc: block: add block number limitation flag for multiple block read Kuninori Morimoto
2014-08-22 10:31 ` Ulf Hansson
2014-08-25 0:53 ` Kuninori Morimoto
2014-08-25 8:50 ` Ulf Hansson
2014-08-25 9:59 ` Kuninori Morimoto
2014-08-27 1:37 ` Kuninori Morimoto
2014-08-22 8:37 ` [PATCH 02/10 v2 resend] mmc: tmio: care about DMA tx/rx addr offset Kuninori Morimoto
2014-08-22 8:38 ` [PATCH 03/10 v2 resend] mmc: tmio: clear error IRQ status Kuninori Morimoto
2014-08-22 8:39 ` [PATCH 04/10 v2 resend] mmc: tmio: control multiple block transfer mode Kuninori Morimoto
2014-08-22 8:40 ` [PATCH 05/10 v2 resend] mmc: tmio: add TMIO_MMC_SDIO_STATUS_QUIRK Kuninori Morimoto
2014-08-22 8:40 ` [PATCH 06/10 v2 resend] mmc: tmio: check ILL_FUNC instead of CBSY Kuninori Morimoto
2014-08-22 8:40 ` [PATCH 07/10 v2 resend] mmc: tmio: remove Renesas specific #ifdef Kuninori Morimoto
2014-08-22 8:40 ` [PATCH 08/10 v2 resend] mmc: tmio: remove SCLKEN bit setting from tmio_mmc_set_clock() Kuninori Morimoto
2014-08-22 8:41 ` [PATCH 09/10 v2 resend] mmc: tmio: ensure that the clock has been stopped before set_clock Kuninori Morimoto
2014-08-25 2:57 ` [PATCH 0/9 v3] mmc: tmio: fixup patches Kuninori Morimoto
2014-08-25 2:58 ` [PATCH 1/9 v3] mmc: tmio: care about DMA tx/rx addr offset Kuninori Morimoto
2014-08-25 2:59 ` [PATCH 2/9 v3] mmc: tmio: clear error IRQ status Kuninori Morimoto
2014-08-25 3:00 ` [PATCH 3/9 v3] mmc: tmio: control multiple block transfer mode Kuninori Morimoto
2014-08-25 3:00 ` [PATCH 4/9 v3] mmc: tmio: add TMIO_MMC_SDIO_STATUS_QUIRK Kuninori Morimoto
2014-08-25 3:01 ` [PATCH 5/9 v3] mmc: tmio: check ILL_FUNC instead of CBSY Kuninori Morimoto
2014-08-25 3:01 ` [PATCH 6/9 v3] mmc: tmio: remove Renesas specific #ifdef Kuninori Morimoto
2014-08-25 3:02 ` [PATCH 7/9 v3] mmc: tmio: remove SCLKEN bit setting from tmio_mmc_set_clock() Kuninori Morimoto
2014-08-25 3:02 ` [PATCH 8/9 v3] mmc: tmio: ensure that the clock has been stopped before set_clock Kuninori Morimoto
2014-08-25 3:03 ` [PATCH 9/9 v3] mmc: tmio: add actual clock support as option Kuninori Morimoto
2014-08-27 13:11 ` [PATCH 0/9 v3] mmc: tmio: fixup patches Ulf Hansson
2014-08-28 2:24 ` [PATCH v4] mmc: tmio: ensure that the clock has been stopped before set_clock Kuninori Morimoto
2014-08-28 7:11 ` Ulf Hansson
2014-08-28 7:13 ` Ulf Hansson
2014-08-28 10:36 ` Kuninori Morimoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a97ilcw3.wl%kuninori.morimoto.gx@gmail.com \
--to=kuninori.morimoto.gx@gmail.com \
--cc=cjb@laptop.org \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=yusuke.goda.sx@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).