From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-sh@vger.kernel.org
Subject: [PATCH] SH2(A) cache update
Date: Sun, 06 Jul 2008 04:50:45 +0000 [thread overview]
Message-ID: <87hcb37h0a.wl%ysato@users.sourceforge.jp> (raw)
Include
- SH2 (7619) Writeback support.
- SH2A cache handling fix.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 29d8e3c..a84a104 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -229,7 +229,6 @@ choice
config CACHE_WRITEBACK
bool "Write-back"
- depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
config CACHE_WRITETHROUGH
bool "Write-through"
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index e295db6..e3f95b2 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -5,7 +5,9 @@
obj-y := init.o extable_32.o consistent.o
ifndef CONFIG_CACHE_OFF
-obj-$(CONFIG_CPU_SH2) += cache-sh2.o
+sh2-$(CONFIG_CPU_SH2) := cache-sh2.o
+sh2-$(CONFIG_CPU_SH2A) := cache-sh2a.o
+obj-$(CONFIG_CPU_SH2) += $(sh2-y)
obj-$(CONFIG_CPU_SH3) += cache-sh3.o
obj-$(CONFIG_CPU_SH4) += cache-sh4.o
obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index 6614033..cfa5d80 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -2,6 +2,7 @@
* arch/sh/mm/cache-sh2.c
*
* Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2008 Yoshinori Sato
*
* Released under the terms of the GNU GPL v2.0.
*/
@@ -15,6 +16,74 @@
#include <asm/cacheflush.h>
#include <asm/io.h>
+#ifdef CONFIG_CPU_SUBTYPE_SH7619
+void __flush_wback_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
+ int way;
+ for (way = 0; way < 4; way++) {
+ unsigned long data = ctrl_inl(addr | (way << 12));
+ if ((data & CACHE_PHYSADDR_MASK) = (v & CACHE_PHYSADDR_MASK)) {
+ data &= ~SH_CACHE_UPDATED;
+ ctrl_outl(data, addr | (way << 12));
+ }
+ }
+ }
+}
+
+void __flush_purge_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+ }
+}
+
+void __flush_invalidate_region(void *start, int size)
+{
+#ifdef CONFIG_CACHE_WRITEBACK
+/*
+ SH-2 is line invalidate not support
+ All line invalidate
+*/
+ unsigned long ccr;
+ unsigned long flags;
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ ccr = ctrl_inl(CCR);
+ ccr |= CCR_CACHE_INVALIDATE;
+ ctrl_outl(ccr, CCR);
+
+ back_to_cached();
+ local_irq_restore(flags);
+#else
+ unsigned long v;
+ unsigned long begin, end;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+ }
+#endif
+}
+#else
void __flush_wback_region(void *start, int size)
{
unsigned long v;
@@ -54,4 +123,5 @@ void __flush_invalidate_region(void *start, int size)
ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
}
}
+#endif
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
new file mode 100644
index 0000000..6d8da5c
--- /dev/null
+++ b/arch/sh/mm/cache-sh2a.c
@@ -0,0 +1,101 @@
+/*
+ * arch/sh/mm/cache-sh2a.c
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+void __flush_wback_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+ unsigned long flags;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0);
+ int way;
+ for (way = 0; way < 4; way++) {
+ unsigned long data = ctrl_inl(addr | (way << 11));
+ if ((data & CACHE_PHYSADDR_MASK) = (v & CACHE_PHYSADDR_MASK)) {
+ data &= ~SH_CACHE_UPDATED;
+ ctrl_outl(data, addr | (way << 11));
+ }
+ }
+ }
+
+ back_to_cached();
+ local_irq_restore(flags);
+}
+
+void __flush_purge_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+ unsigned long flags;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ }
+ back_to_cached();
+ local_irq_restore(flags);
+}
+
+void __flush_invalidate_region(void *start, int size)
+{
+ unsigned long v;
+ unsigned long begin, end;
+ unsigned long flags;
+
+ begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+ end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+ & ~(L1_CACHE_BYTES-1);
+ local_irq_save(flags);
+ jump_to_uncached();
+
+#ifdef CONFIG_CACHE_WRITEBACK
+/*
+ SH-2A O-cache is line invalidate not support
+ All line invalidate
+*/
+ ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+ /* I-cache invalidate */
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ }
+#else
+ for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ ctrl_outl((v & CACHE_PHYSADDR_MASK),
+ CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+ }
+#endif
+ back_to_cached();
+ local_irq_restore(flags);
+}
diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h
index 4e0b165..673515b 100644
--- a/include/asm-sh/cpu-sh2/cache.h
+++ b/include/asm-sh/cpu-sh2/cache.h
@@ -21,11 +21,11 @@
#define CCR 0xffffffec
#define CCR_CACHE_CE 0x01 /* Cache enable */
-#define CCR_CACHE_WT 0x06 /* CCR[bit1=1,bit2=1] */
+#define CCR_CACHE_WT 0x02 /* CCR[bit1=1,bit2=1] */
/* 0x00000000-0x7fffffff: Write-through */
/* 0x80000000-0x9fffffff: Write-back */
/* 0xc0000000-0xdfffffff: Write-through */
-#define CCR_CACHE_CB 0x00 /* CCR[bit1=0,bit2=0] */
+#define CCR_CACHE_CB 0x04 /* CCR[bit1=0,bit2=0] */
/* 0x00000000-0x7fffffff: Write-back */
/* 0x80000000-0x9fffffff: Write-through */
/* 0xc0000000-0xdfffffff: Write-back */
@@ -36,6 +36,8 @@
#define CCR_CACHE_ENABLE CCR_CACHE_CE
#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
+#define CACHE_PHYSADDR_MASK 0x1ffffc00
+
#endif
#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/include/asm-sh/cpu-sh2a/cache.h b/include/asm-sh/cpu-sh2a/cache.h
index afe228b..defb0ba 100644
--- a/include/asm-sh/cpu-sh2a/cache.h
+++ b/include/asm-sh/cpu-sh2a/cache.h
@@ -36,5 +36,8 @@
#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE)
#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI)
+#define CCR_ICACHE_INVALIDATE CCR_CACHE_ICI
+#define CCR_OCACHE_INVALIDATE CCR_CACHE_OCI
+#define CACHE_PHYSADDR_MASK 0x1ffffc00
#endif /* __ASM_CPU_SH2A_CACHE_H */
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
next reply other threads:[~2008-07-06 4:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-06 4:50 Yoshinori Sato [this message]
2008-07-08 20:20 ` [PATCH] SH2(A) cache update Yoshinori Sato
2008-08-04 7:35 ` Paul Mundt
2008-08-05 19:26 ` Yoshinori Sato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87hcb37h0a.wl%ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox