SUPERH platform development
 help / color / mirror / Atom feed
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>, Chris Ball <cjb@laptop.org>,
	Simon <horms@verge.net.au>, Linux-SH <linux-sh@vger.kernel.org>,
	linux-mmc <linux-mmc@vger.kernel.org>
Subject: [PATCH 07/17] mmc: tmio: tmio_mmc_host has .bus_shift
Date: Tue, 13 Jan 2015 04:58:20 +0000	[thread overview]
Message-ID: <87k30ruvhn.wl%kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <87twzvuvl1.wl%kuninori.morimoto.gx@renesas.com>

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current .bus_shift is implemented under tmio_mmc_data.
It goes to tmio_mmc_host by this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 drivers/mmc/host/sh_mobile_sdhi.c |    5 ++---
 drivers/mmc/host/tmio_mmc.c       |    5 +++--
 drivers/mmc/host/tmio_mmc.h       |   17 +++++++++--------
 drivers/mmc/host/tmio_mmc_dma.c   |    2 +-
 include/linux/mfd/tmio.h          |    1 -
 5 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index c92efe5..0db2a0a 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -218,6 +218,8 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	host->clk_enable	= sh_mobile_sdhi_clk_enable;
 	host->clk_disable	= sh_mobile_sdhi_clk_disable;
 	host->multi_io_quirk	= sh_mobile_sdhi_multi_io_quirk;
+	/* SD control register space size is 0x100, 0x200 for bus_shift=1 */
+	host->bus_shift		= resource_size(res) >> 9;
 
 	mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
 	if (p) {
@@ -277,9 +279,6 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 		dma_priv->dma_rx_offset = of_data->dma_rx_offset;
 	}
 
-	/* SD control register space size is 0x100, 0x200 for bus_shift=1 */
-	mmc_data->bus_shift = resource_size(res) >> 9;
-
 	ret = tmio_mmc_host_probe(host, mmc_data);
 	if (ret < 0)
 		goto efree;
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index f47ae08..9e8723d 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -88,14 +88,15 @@ static int tmio_mmc_probe(struct platform_device *pdev)
 	if (!res)
 		return -EINVAL;
 
-	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
-	pdata->bus_shift = resource_size(res) >> 10;
 	pdata->flags |= TMIO_MMC_HAVE_HIGH_REG;
 
 	host = tmio_mmc_host_alloc(pdev);
 	if (!host)
 		goto cell_disable;
 
+	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+	host->bus_shift = resource_size(res) >> 10;
+
 	ret = tmio_mmc_host_probe(host, pdata);
 	if (ret)
 		goto host_free;
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 263256c..a5d30bf 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -66,6 +66,7 @@ struct tmio_mmc_host {
 	struct scatterlist      *sg_orig;
 	unsigned int            sg_len;
 	unsigned int            sg_off;
+	unsigned long		bus_shift;
 
 	struct platform_device *pdev;
 	struct tmio_mmc_data *pdata;
@@ -169,19 +170,19 @@ int tmio_mmc_host_runtime_resume(struct device *dev);
 
 static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
 {
-	return readw(host->ctl + (addr << host->pdata->bus_shift));
+	return readw(host->ctl + (addr << host->bus_shift));
 }
 
 static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
 		u16 *buf, int count)
 {
-	readsw(host->ctl + (addr << host->pdata->bus_shift), buf, count);
+	readsw(host->ctl + (addr << host->bus_shift), buf, count);
 }
 
 static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
 {
-	return readw(host->ctl + (addr << host->pdata->bus_shift)) |
-	       readw(host->ctl + ((addr + 2) << host->pdata->bus_shift)) << 16;
+	return readw(host->ctl + (addr << host->bus_shift)) |
+	       readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
 }
 
 static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val)
@@ -191,19 +192,19 @@ static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val
 	 */
 	if (host->write16_hook && host->write16_hook(host, addr))
 		return;
-	writew(val, host->ctl + (addr << host->pdata->bus_shift));
+	writew(val, host->ctl + (addr << host->bus_shift));
 }
 
 static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
 		u16 *buf, int count)
 {
-	writesw(host->ctl + (addr << host->pdata->bus_shift), buf, count);
+	writesw(host->ctl + (addr << host->bus_shift), buf, count);
 }
 
 static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
 {
-	writew(val, host->ctl + (addr << host->pdata->bus_shift));
-	writew(val >> 16, host->ctl + ((addr + 2) << host->pdata->bus_shift));
+	writew(val, host->ctl + (addr << host->bus_shift));
+	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
 }
 
 
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
index 6c214d6..ee0131e 100644
--- a/drivers/mmc/host/tmio_mmc_dma.c
+++ b/drivers/mmc/host/tmio_mmc_dma.c
@@ -289,7 +289,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
 		if (host->dma->chan_priv_tx)
 			cfg.slave_id = host->dma->slave_id_tx;
 		cfg.direction = DMA_MEM_TO_DEV;
-		cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->pdata->bus_shift);
+		cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->bus_shift);
 		cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 		cfg.src_addr = 0;
 		ret = dmaengine_slave_config(host->chan_tx, &cfg);
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 3edaa17..7a5c279 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -120,7 +120,6 @@ struct tmio_mmc_data {
 	unsigned long			capabilities;
 	unsigned long			capabilities2;
 	unsigned long			flags;
-	unsigned long			bus_shift;
 	u32				ocr_mask;	/* available voltages */
 	unsigned int			cd_gpio;
 	void (*set_pwr)(struct platform_device *host, int state);
-- 
1.7.9.5


  parent reply	other threads:[~2015-01-13  4:58 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <201501131902.WqokttpY%fengguang.wu@intel.com>
2015-01-13  4:56 ` [PATCH 0/17 v2] tmio: mmc: header cleanup / sh_mobile_cleanup Kuninori Morimoto
2015-01-13  4:57   ` [PATCH 01/17] mmc: tmio: add tmio_mmc_host_alloc/free() Kuninori Morimoto
2015-01-20  9:10     ` Ulf Hansson
2015-01-20  9:38       ` Lee Jones
2015-01-13  4:57   ` [PATCH 02/17] mmc: tmio: tmio_mmc_host has .dma Kuninori Morimoto
2015-01-20  9:10     ` Ulf Hansson
2015-01-20  9:37       ` Lee Jones
2015-01-13  4:57   ` [PATCH 03/17] mmc: tmio: tmio_mmc_host has .write16_hook Kuninori Morimoto
2015-01-20  9:11     ` Ulf Hansson
2015-01-20  9:37       ` Lee Jones
2015-01-13  4:57   ` [PATCH 04/17] mmc: tmio: tmio_mmc_host has .clk_enable Kuninori Morimoto
2015-01-20  9:11     ` Ulf Hansson
2015-01-20  9:36       ` Lee Jones
2015-01-13  4:58   ` [PATCH 05/17] mmc: tmio: tmio_mmc_host has .clk_disable Kuninori Morimoto
2015-01-20  9:11     ` Ulf Hansson
2015-01-20  9:36       ` Lee Jones
2015-01-13  4:58   ` [PATCH 06/17] mmc: tmio: tmio_mmc_host has .multi_io_quirk Kuninori Morimoto
2015-01-20  9:12     ` Ulf Hansson
2015-01-20  9:35       ` Lee Jones
2015-01-13  4:58   ` Kuninori Morimoto [this message]
2015-01-20  9:12     ` [PATCH 07/17] mmc: tmio: tmio_mmc_host has .bus_shift Ulf Hansson
2015-01-20  9:35       ` Lee Jones
2015-01-13  4:58   ` [PATCH 08/17] mmc: tmio: tmio_mmc_data has .alignment_shift Kuninori Morimoto
2015-01-20  9:13     ` Ulf Hansson
2015-01-20  9:34       ` Lee Jones
2015-01-13  4:58   ` [PATCH 09/17] mmc: tmio: tmio_mmc_data has .dma_rx_offset Kuninori Morimoto
2015-01-20  9:13     ` Ulf Hansson
2015-01-20  9:34       ` Lee Jones
2015-01-13  4:59   ` [PATCH 10/17] mmc: tmio: add .enable_dma on tmio_mmc_data Kuninori Morimoto
2015-01-13  4:59   ` [PATCH 11/17] mmc: tmio: enable SoC specific DMA buswidth settings Kuninori Morimoto
2015-01-13  4:59   ` [PATCH 12/17] mmc: sh_mobile_sdhi: remove .init/.cleanup Kuninori Morimoto
2015-01-13  4:59   ` [PATCH 13/17] mmc: sh_mobile_sdhi: tidyup mmc_data->bus_shift for latest SoC Kuninori Morimoto
2015-01-13  4:59   ` [PATCH 14/17] mmc: sh_mobile_sdhi: add new macro for mmc_host to sh_mobile_sdhi Kuninori Morimoto
2015-01-13  4:59   ` [PATCH 15/17] mmc: sh_mobile_sdhi: use .enable_dma Kuninori Morimoto
2015-01-13  5:00   ` [PATCH 16/17] mmc: sh_mobile_sdhi: enable 32bit DMA access Kuninori Morimoto
2015-01-13  5:00   ` [PATCH 17/17] mmc: tmio: remove TMIO_MMC_HAVE_CTL_DMA_REG flag Kuninori Morimoto
2015-01-20  9:14     ` Ulf Hansson
2015-01-20  9:33       ` Lee Jones
2015-01-13  9:35   ` [PATCH 0/17 v2] tmio: mmc: header cleanup / sh_mobile_cleanup Ulf Hansson
2015-01-14  8:30   ` [PATCH] mmc: tmio: add missing EXPORT_SYMBOL for tmio_mmc_host_alloc/free Ulf Hansson
2015-01-14  8:57     ` Kuninori Morimoto
2015-01-20  9:15     ` Ulf Hansson
2015-01-20  9:09   ` [PATCH 0/17 v2] tmio: mmc: header cleanup / sh_mobile_cleanup Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87k30ruvhn.wl%kuninori.morimoto.gx@renesas.com \
    --to=kuninori.morimoto.gx@renesas.com \
    --cc=arnd@arndb.de \
    --cc=cjb@laptop.org \
    --cc=horms@verge.net.au \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox