* [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings
@ 2014-02-11 8:56 Geert Uytterhoeven
[not found] ` <1392109008-29941-1-git-send-email-geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Geert Uytterhoeven @ 2014-02-11 8:56 UTC (permalink / raw)
To: Simon Horman, Kuninori Morimoto
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-spi-u79uwXL29TY76Z2rM5mHXA, linux-sh-u79uwXL29TY76Z2rM5mHXA,
Geert Uytterhoeven, Mark Brown
From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Binding documentation:
- Add future-proof "renesas,hspi-<soctype>" compatible values,
- Add "interrupt-parent", "#address-cells" and "#size-cells" properties,
- Add reference to pinctrl documentation,
- Add example bindings.
r8a7778 and r8a7779 dtsi:
- Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible
values,
- Correct reference to parent interrupt controller
(use "interrupt-parent" instead of "interrupt-controller"),
- Add missing "#address-cells" and "#size-cells" properties, which are
needed when populating the SPI buses.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Cc: Mark Brown <broonie@linaro.org>
---
Untested due to lack of hardware
Documentation/devicetree/bindings/spi/sh-hspi.txt | 27 ++++++++++++++++++---
arch/arm/boot/dts/r8a7778.dtsi | 18 +++++++++-----
arch/arm/boot/dts/r8a7779.dtsi | 18 +++++++++-----
3 files changed, 48 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
index 30b57b1c8a13..d43080eb6b3a 100644
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt
@@ -1,7 +1,28 @@
Renesas HSPI.
Required properties:
-- compatible : "renesas,hspi"
-- reg : Offset and length of the register set for the device
-- interrupts : interrupt line used by HSPI
+- compatible : "renesas,hspi-<soctype>", "renesas,hspi" as fallback.
+ Examples of valid soctypes are "r8a7778" (R-Car M1),
+ and "r8a7779" (R-Car H1)
+- reg : Offset and length of the register set for the device
+- interrupt-parent : The phandle for the interrupt controller that
+ services interrupts for this device
+- interrupts : Interrupt specifier
+- #address-cells : Must be <1>
+- #size-cells : Must be <0>
+
+Pinctrl properties might be needed, too. See
+Documentation/devicetree/bindings/pinctrl/renesas,*.
+
+Example:
+
+ hspi0: spi@fffc7000 {
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+ reg = <0xfffc7000 0x18>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 85c5b3b99f5e..3c6fab5c9702 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -204,26 +204,32 @@
};
hspi0: spi@fffc7000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc7000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi1: spi@fffc8000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc8000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi2: spi@fffc6000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc6000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index d0561d4c7c46..8b1a336ee401 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -256,26 +256,32 @@
};
hspi0: spi@fffc7000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc7000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi1: spi@fffc8000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc8000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
hspi2: spi@fffc6000 {
- compatible = "renesas,hspi";
+ compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc6000 0x18>;
- interrupt-controller = <&gic>;
+ interrupt-parent = <&gic>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread[parent not found: <1392109008-29941-1-git-send-email-geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>]
* [PATCH 2/2] ARM: shmobile: bockw reference dts: Add SPI FLASH [not found] ` <1392109008-29941-1-git-send-email-geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org> @ 2014-02-11 8:56 ` Geert Uytterhoeven 2014-02-13 5:56 ` [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings Simon Horman 1 sibling, 0 replies; 6+ messages in thread From: Geert Uytterhoeven @ 2014-02-11 8:56 UTC (permalink / raw) To: Simon Horman, Kuninori Morimoto Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-spi-u79uwXL29TY76Z2rM5mHXA, linux-sh-u79uwXL29TY76Z2rM5mHXA, Geert Uytterhoeven From: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Add Spansion s25fl008k SPI FLASH and MTD partition, based on bockw legacy board code. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> --- Untested due to lack of hardware arch/arm/boot/dts/r8a7778-bockw-reference.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 06cda19dac6a..f76f6ec01e19 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -109,4 +109,18 @@ pinctrl-0 = <&hspi0_pins>; pinctrl-names = "default"; status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl008k"; + reg = <0>; + spi-max-frequency = <104000000>; + m25p,fast-read; + + partition@0 { + label = "data(spi)"; + reg = <0x00000000 0x00100000>; + }; + }; }; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings [not found] ` <1392109008-29941-1-git-send-email-geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org> 2014-02-11 8:56 ` [PATCH 2/2] ARM: shmobile: bockw reference dts: Add SPI FLASH Geert Uytterhoeven @ 2014-02-13 5:56 ` Simon Horman [not found] ` <20140213055600.GF17183-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> 1 sibling, 1 reply; 6+ messages in thread From: Simon Horman @ 2014-02-13 5:56 UTC (permalink / raw) To: Geert Uytterhoeven, Kuninori Morimoto Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-spi-u79uwXL29TY76Z2rM5mHXA, linux-sh-u79uwXL29TY76Z2rM5mHXA, Geert Uytterhoeven, Mark Brown Hi Morimoto-san, could you test this series as Geert does not have access to a bockw board? On Tue, Feb 11, 2014 at 09:56:47AM +0100, Geert Uytterhoeven wrote: > From: Geert Uytterhoeven <geert+renesas@linux-m68k.org> > > Binding documentation: > - Add future-proof "renesas,hspi-<soctype>" compatible values, > - Add "interrupt-parent", "#address-cells" and "#size-cells" properties, > - Add reference to pinctrl documentation, > - Add example bindings. > > r8a7778 and r8a7779 dtsi: > - Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible > values, > - Correct reference to parent interrupt controller > (use "interrupt-parent" instead of "interrupt-controller"), > - Add missing "#address-cells" and "#size-cells" properties, which are > needed when populating the SPI buses. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> > Cc: Mark Brown <broonie@linaro.org> > --- > Untested due to lack of hardware > > Documentation/devicetree/bindings/spi/sh-hspi.txt | 27 ++++++++++++++++++--- > arch/arm/boot/dts/r8a7778.dtsi | 18 +++++++++----- > arch/arm/boot/dts/r8a7779.dtsi | 18 +++++++++----- > 3 files changed, 48 insertions(+), 15 deletions(-) > > diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt > index 30b57b1c8a13..d43080eb6b3a 100644 > --- a/Documentation/devicetree/bindings/spi/sh-hspi.txt > +++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt > @@ -1,7 +1,28 @@ > Renesas HSPI. > > Required properties: > -- compatible : "renesas,hspi" > -- reg : Offset and length of the register set for the device > -- interrupts : interrupt line used by HSPI > +- compatible : "renesas,hspi-<soctype>", "renesas,hspi" as fallback. > + Examples of valid soctypes are "r8a7778" (R-Car M1), > + and "r8a7779" (R-Car H1) > +- reg : Offset and length of the register set for the device > +- interrupt-parent : The phandle for the interrupt controller that > + services interrupts for this device > +- interrupts : Interrupt specifier > +- #address-cells : Must be <1> > +- #size-cells : Must be <0> > + > +Pinctrl properties might be needed, too. See > +Documentation/devicetree/bindings/pinctrl/renesas,*. > + > +Example: > + > + hspi0: spi@fffc7000 { > + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; > + reg = <0xfffc7000 0x18>; > + interrupt-parent = <&gic>; > + interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > > diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi > index 85c5b3b99f5e..3c6fab5c9702 100644 > --- a/arch/arm/boot/dts/r8a7778.dtsi > +++ b/arch/arm/boot/dts/r8a7778.dtsi > @@ -204,26 +204,32 @@ > }; > > hspi0: spi@fffc7000 { > - compatible = "renesas,hspi"; > + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; > reg = <0xfffc7000 0x18>; > - interrupt-controller = <&gic>; > + interrupt-parent = <&gic>; > interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > status = "disabled"; > }; > > hspi1: spi@fffc8000 { > - compatible = "renesas,hspi"; > + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; > reg = <0xfffc8000 0x18>; > - interrupt-controller = <&gic>; > + interrupt-parent = <&gic>; > interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > status = "disabled"; > }; > > hspi2: spi@fffc6000 { > - compatible = "renesas,hspi"; > + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; > reg = <0xfffc6000 0x18>; > - interrupt-controller = <&gic>; > + interrupt-parent = <&gic>; > interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > status = "disabled"; > }; > }; > diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi > index d0561d4c7c46..8b1a336ee401 100644 > --- a/arch/arm/boot/dts/r8a7779.dtsi > +++ b/arch/arm/boot/dts/r8a7779.dtsi > @@ -256,26 +256,32 @@ > }; > > hspi0: spi@fffc7000 { > - compatible = "renesas,hspi"; > + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; > reg = <0xfffc7000 0x18>; > - interrupt-controller = <&gic>; > + interrupt-parent = <&gic>; > interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > status = "disabled"; > }; > > hspi1: spi@fffc8000 { > - compatible = "renesas,hspi"; > + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; > reg = <0xfffc8000 0x18>; > - interrupt-controller = <&gic>; > + interrupt-parent = <&gic>; > interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > status = "disabled"; > }; > > hspi2: spi@fffc6000 { > - compatible = "renesas,hspi"; > + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; > reg = <0xfffc6000 0x18>; > - interrupt-controller = <&gic>; > + interrupt-parent = <&gic>; > interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > status = "disabled"; > }; > }; > -- > 1.7.9.5 > ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <20140213055600.GF17183-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>]
* Re: [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings [not found] ` <20140213055600.GF17183-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> @ 2014-02-13 7:11 ` Kuninori Morimoto [not found] ` <87zjlvbi7l.wl%kuninori.morimoto.gx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 6+ messages in thread From: Kuninori Morimoto @ 2014-02-13 7:11 UTC (permalink / raw) To: Simon Horman Cc: Geert Uytterhoeven, Kuninori Morimoto, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-spi-u79uwXL29TY76Z2rM5mHXA, linux-sh-u79uwXL29TY76Z2rM5mHXA, Geert Uytterhoeven, Mark Brown Hi Simon, Geert Cc Mark > could you test this series as Geert does not have access to a bockw board? > > On Tue, Feb 11, 2014 at 09:56:47AM +0100, Geert Uytterhoeven wrote: > > From: Geert Uytterhoeven <geert+renesas@linux-m68k.org> > > > > Binding documentation: > > - Add future-proof "renesas,hspi-<soctype>" compatible values, > > - Add "interrupt-parent", "#address-cells" and "#size-cells" properties, > > - Add reference to pinctrl documentation, > > - Add example bindings. > > > > r8a7778 and r8a7779 dtsi: > > - Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible > > values, > > - Correct reference to parent interrupt controller > > (use "interrupt-parent" instead of "interrupt-controller"), > > - Add missing "#address-cells" and "#size-cells" properties, which are > > needed when populating the SPI buses. > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> > > Cc: Mark Brown <broonie@linaro.org> > > --- I tested this patch, and it works well. But there are some notes 1) m25p80 driver DT support seems strange ?? ${LINUX}/Documentation/devicetree/bindings/mtd/m25p80.txt has explain about DT of m25p80 driver, but, ${LINUX}/drivers/mtd/devices/m25p80.c doesn't have driver :: of_match_table. but, it is using of_property_read_bool() on probe. Is it out-of-tree support ?? I'm not sure, anyway, m25p80 driver didn't probe. So, I quick-hacked this issue in my local environment. 2) it needs Geert's this patch Subject: [PATCH] mtd: m25p80: add support for the Spansion s25fl008k chip Date: Tue, 11 Feb 2014 09:51:18 +0100 Kernel will hung-up without this patch For HSPI / BockW point of view Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <87zjlvbi7l.wl%kuninori.morimoto.gx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings [not found] ` <87zjlvbi7l.wl%kuninori.morimoto.gx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2014-02-13 8:31 ` Geert Uytterhoeven 2014-02-13 9:02 ` Kuninori Morimoto 0 siblings, 1 reply; 6+ messages in thread From: Geert Uytterhoeven @ 2014-02-13 8:31 UTC (permalink / raw) To: Kuninori Morimoto Cc: Simon Horman, Kuninori Morimoto, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-spi, Linux-sh list, Geert Uytterhoeven, Mark Brown Hi Morimoto-san, On Thu, Feb 13, 2014 at 8:11 AM, Kuninori Morimoto <kuninori.morimoto.gx@gmail.com> wrote: >> could you test this series as Geert does not have access to a bockw board? >> >> On Tue, Feb 11, 2014 at 09:56:47AM +0100, Geert Uytterhoeven wrote: >> > From: Geert Uytterhoeven <geert+renesas@linux-m68k.org> >> > >> > Binding documentation: >> > - Add future-proof "renesas,hspi-<soctype>" compatible values, >> > - Add "interrupt-parent", "#address-cells" and "#size-cells" properties, >> > - Add reference to pinctrl documentation, >> > - Add example bindings. >> > >> > r8a7778 and r8a7779 dtsi: >> > - Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible >> > values, >> > - Correct reference to parent interrupt controller >> > (use "interrupt-parent" instead of "interrupt-controller"), >> > - Add missing "#address-cells" and "#size-cells" properties, which are >> > needed when populating the SPI buses. >> > >> > Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> >> > Cc: Mark Brown <broonie@linaro.org> >> > --- > > I tested this patch, and it works well. > But there are some notes > > 1) m25p80 driver DT support seems strange ?? > > ${LINUX}/Documentation/devicetree/bindings/mtd/m25p80.txt > has explain about DT of m25p80 driver, but, > ${LINUX}/drivers/mtd/devices/m25p80.c > doesn't have driver :: of_match_table. > but, it is using of_property_read_bool() on probe. > Is it out-of-tree support ?? I'm not sure, > anyway, m25p80 driver didn't probe. It probes based on the values in m25p_ids[]. See drivers/of/base.c:of_modalias_node(): * Based on the value of the compatible property, this routine will attempt * to choose an appropriate modalias value for a particular device tree node. * It does this by stripping the manufacturer prefix (as delimited by a ',') * from the first entry in the compatible list property. Which is used by drivers/spi/spi.c:of_register_spi_devices(). > So, I quick-hacked this issue in my local environment. Was there anything else you needed to do, besides adding support for s25fl008k to m25p80.c? > 2) it needs Geert's this patch > > Subject: [PATCH] mtd: m25p80: add support for the Spansion s25fl008k chip > Date: Tue, 11 Feb 2014 09:51:18 +0100 > > Kernel will hung-up without this patch Hang up? Not just ignoring the device? > For HSPI / BockW point of view > > Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Thanks! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings 2014-02-13 8:31 ` Geert Uytterhoeven @ 2014-02-13 9:02 ` Kuninori Morimoto 0 siblings, 0 replies; 6+ messages in thread From: Kuninori Morimoto @ 2014-02-13 9:02 UTC (permalink / raw) To: Geert Uytterhoeven Cc: Simon Horman, Kuninori Morimoto, devicetree@vger.kernel.org, linux-spi, Linux-sh list, Geert Uytterhoeven, Mark Brown Hi Geert CC Simon Thank you for your help > * Based on the value of the compatible property, this routine will attempt > * to choose an appropriate modalias value for a particular device tree node. > * It does this by stripping the manufacturer prefix (as delimited by a ',') > * from the first entry in the compatible list property. > > Which is used by drivers/spi/spi.c:of_register_spi_devices(). > > > So, I quick-hacked this issue in my local environment. > > Was there anything else you needed to do, besides adding support for > s25fl008k to m25p80.c? I re-tested cleanly this patch. Yes, indeed, my local-hack was not needed. It was my fault. > > 2) it needs Geert's this patch > > > > Subject: [PATCH] mtd: m25p80: add support for the Spansion s25fl008k chip > > Date: Tue, 11 Feb 2014 09:51:18 +0100 > > > > Kernel will hung-up without this patch > > Hang up? Not just ignoring the device? It works without Hang-up in my re-test now. My previous test seems something wrong. Thank you Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Best regards --- Kuninori Morimoto ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-02-13 9:02 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-11 8:56 [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings Geert Uytterhoeven
[not found] ` <1392109008-29941-1-git-send-email-geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
2014-02-11 8:56 ` [PATCH 2/2] ARM: shmobile: bockw reference dts: Add SPI FLASH Geert Uytterhoeven
2014-02-13 5:56 ` [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings Simon Horman
[not found] ` <20140213055600.GF17183-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2014-02-13 7:11 ` Kuninori Morimoto
[not found] ` <87zjlvbi7l.wl%kuninori.morimoto.gx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-13 8:31 ` Geert Uytterhoeven
2014-02-13 9:02 ` Kuninori Morimoto
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).