Re: [PATCH 00/02] sh-pfc: Initial r8a73a4 PFC support

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Simon,

On Tuesday 19 March 2013 09:26:53 Simon Horman wrote:
> On Mon, Mar 18, 2013 at 11:50:29PM +0900, Magnus Damm wrote:
> > sh-pfc: Initial r8a73a4 PFC support
> > 
> > [PATCH 01/02] sh-pfc: Add r8a73a4 pinmux support
> > [PATCH 02/02] sh-pfc: Add r8a73a4 GPIO IRQ support
> > 
> > This series is V1 of initial PFC support for the r8a73a4 SoC.
> > Nothing out of the ordinary, just similar but different tables
> > to describe the pinmux hardware and GPIOs on r8a73a4.
> > 
> > The header in the mach directory is still used, and in the future
> > this will be removed when fully using PINCTRL. Until then a common
> > location is needed so this series simply follows what other SoCs
> > do. Because of this there is a dependency on the r8a73a4 SoC code.
> 
> Laurent, could you review these and either give me some Acks or a branch to
> pull? I assume the base should be the renesas-pinmux-for-v3.10 tag in the
> renesas tree.

I will review the patches. However, following a discussion I've had with 
Magnus, I won't take the patches without proper pinctrl support. The first 
patch uses the old API for r8a73a4 support in the PFC driver to make 
backporting easier, but I don't want to push it to mainline without additional 
patches to move to the pinctrl API.

Magnus, are you working on that ?

-- 
Regards,

Laurent Pinchart