From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v5 12/15] ARM: shmobile: r8a7778: Switch to new style TMU device
Date: Fri, 02 May 2014 18:19:19 +0000 [thread overview]
Message-ID: <9785908.DSqaheyPyN@avalon> (raw)
In-Reply-To: <1398251722-31667-13-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
This should be v6, not v5, sorry.
On Friday 02 May 2014 19:09:35 Laurent Pinchart wrote:
> The TMU (Timer Unit) driver implements a new style of platform data that
> handles the timer as a single device with multiple channel. Switch from
> the old-style platform data to the new-style platform data.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
> arch/arm/mach-shmobile/clock-r8a7778.c | 4 ++--
> arch/arm/mach-shmobile/setup-r8a7778.c | 28 +++++++---------------------
> 2 files changed, 9 insertions(+), 23 deletions(-)
>
> Changes since v4:
>
> - Fixed TMU interrupts that mistakenly used gic_spi instead of gic_iid
>
> diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c
> b/arch/arm/mach-shmobile/clock-r8a7778.c index 201fc48..65f08f7 100644
> --- a/arch/arm/mach-shmobile/clock-r8a7778.c
> +++ b/arch/arm/mach-shmobile/clock-r8a7778.c
> @@ -207,8 +207,6 @@ static struct clk_lookup lookups[] = {
> CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
> CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
> CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
> - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
> - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
> CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
> CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
> CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
> @@ -239,6 +237,8 @@ static struct clk_lookup lookups[] = {
> CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
> CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
> CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
> + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
> + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
> };
>
> void __init r8a7778_clock_init(void)
> diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c
> b/arch/arm/mach-shmobile/setup-r8a7778.c index 6d69452..8c02e24 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7778.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7778.c
> @@ -71,33 +71,20 @@ R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
> sizeof(scif##index##_platform_data))
>
> /* TMU */
> -static struct resource sh_tmu0_resources[] __initdata = {
> - DEFINE_RES_MEM(0xffd80008, 12),
> - DEFINE_RES_IRQ(gic_iid(0x40)),
> -};
> -
> -static struct sh_timer_config sh_tmu0_platform_data __initdata = {
> - .name = "TMU00",
> - .channel_offset = 0x4,
> - .timer_bit = 0,
> - .clockevent_rating = 200,
> +static struct sh_timer_config sh_tmu0_platform_data = {
> + .channels_mask = 7,
> };
>
> -static struct resource sh_tmu1_resources[] __initdata = {
> - DEFINE_RES_MEM(0xffd80014, 12),
> +static struct resource sh_tmu0_resources[] = {
> + DEFINE_RES_MEM(0xffd80000, 0x30),
> + DEFINE_RES_IRQ(gic_iid(0x40)),
> DEFINE_RES_IRQ(gic_iid(0x41)),
> -};
> -
> -static struct sh_timer_config sh_tmu1_platform_data __initdata = {
> - .name = "TMU01",
> - .channel_offset = 0x10,
> - .timer_bit = 1,
> - .clocksource_rating = 200,
> + DEFINE_RES_IRQ(gic_iid(0x42)),
> };
>
> #define r8a7778_register_tmu(idx) \
> platform_device_register_resndata( \
> - &platform_bus, "sh_tmu", idx, \
> + &platform_bus, "sh-tmu", idx, \
> sh_tmu##idx##_resources, \
> ARRAY_SIZE(sh_tmu##idx##_resources), \
> &sh_tmu##idx##_platform_data, \
> @@ -312,7 +299,6 @@ void __init r8a7778_add_dt_devices(void)
> r8a7778_register_scif(4);
> r8a7778_register_scif(5);
> r8a7778_register_tmu(0);
> - r8a7778_register_tmu(1);
> }
>
> /* HPB-DMA */
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-05-02 18:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-23 11:15 [PATCH v5 12/15] ARM: shmobile: r8a7778: Switch to new style TMU device Laurent Pinchart
2014-05-02 3:51 ` Geert Uytterhoeven
2014-05-02 17:09 ` Laurent Pinchart
2014-05-02 18:19 ` Laurent Pinchart [this message]
2014-05-02 18:21 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9785908.DSqaheyPyN@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox