From mboxrd@z Thu Jan  1 00:00:00 1970
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Wed, 11 Jul 2018 12:53:30 +0000
Subject: Re: [PATCH] [RFC] serial: sh-sci: fix register alocation in h8300.
Message-Id: <CAMuHMdVMw2OhbugZ2yxWoOddL_aBkJ0tF0UwN6hLJHppZ0yhTA@mail.gmail.com>
List-Id: <linux-sh.vger.kernel.org>
References: <20180711114121.10735-1-ysato@users.sourceforge.jp>
In-Reply-To: <20180711114121.10735-1-ysato@users.sourceforge.jp>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-sh@vger.kernel.org

Hi Sato-san,

CC Laurent

On Wed, Jul 11, 2018 at 2:38 PM Yoshinori Sato
<ysato@users.sourceforge.jp> wrote:
> h8300's SCI registers aligned byte address.
> Although it may be appropriate to put it in sci_port_params,
> because I can not think of a good way, I did it like this.
>
> Signei-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

Thanks for your patch!

Fixes: dfc80387aefb7816 ("serial: sh-sci: Compute the regshift value
for SCI ports")

> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> @@ -2862,12 +2862,16 @@ static int sci_init_single(struct platform_device *dev,
>         port->flags             = UPF_FIXED_PORT | UPF_BOOT_AUTOCONF | p->flags;
>         port->fifosize          = sci_port->params->fifosize;
>
> +#if !defined(CONFIG_H8300)
>         if (port->type = PORT_SCI) {
>                 if (sci_port->reg_size >= 0x20)
>                         port->regshift = 2;
>                 else
>                         port->regshift = 1;
>         }
> +#else
> +       port->regshift = 0;
> +#endif

What about using reg_size instead?

        if (sci_port->reg_size >= 0x20)
                port->regshift = 2;
        else if (sci_port->reg_size >= 0x10)
                port->regshift = 1;
        else
                port->regshift = 0;

>         /*
>          * The UART port needs an IRQ value, so we peg this to the RX IRQ

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds