From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
To: alsa-devel@alsa-project.org
Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com>,
Magnus Damm <damm@opensource.se>,
Liam Girdwood <lrg@slimlogic.co.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
linux-sh@vger.kernel.org
Subject: [PATCH 2b/4 v2] ASoC: add support for the sh7722 Migo-R board
Date: Fri, 22 Jan 2010 18:17:09 +0000 [thread overview]
Message-ID: <Pine.LNX.4.64.1001221909050.4652@axis700.grange> (raw)
In-Reply-To: <Pine.LNX.4.64.1001190902000.4607@axis700.grange>
Add support for audio on sh7722-based Migo-R boards, using SIU and wm8978
codec, recording via external microphone and playback via headphones are
implemented.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
v1 -> v2:
1. separated from core SIU patch
2. now selecting SND_SOC_SH4_SIU instead of depending on it
3. moved most of clocking calculations / configuration into the codec
driver, also removed confusing comments
4. refactored calculations, based on input frequency and output frequency
requirement, instead of internal codec knowledge
5. added datasheet revision - now in the actual codec driver
6. removed reconfiguring codec PLL in migor_hw_free() and consequently
removed migor_hw_free() altogether
7. removed hard-coded pin-enabling, now managed by DAPM
8. added widgets and an audio map to supportautomatic routing
configuration and other DAPM functions
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 8072a6d..a86696b 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -55,4 +61,12 @@ config SND_FSI_DA7210
This option enables generic sound support for the
FSI - DA7210 unit
+config SND_SIU_MIGOR
+ tristate "SIU sound support on Migo-R"
+ depends on SH_MIGOR
+ select SND_SOC_SH4_SIU
+ select SND_SOC_WM8978
+ help
+ This option enables sound support for the SH7722 Migo-R board
+
endmenu
diff --git a/sound/soc/sh/Makefile b/sound/soc/sh/Makefile
index 1d0ec0a..8a5a192 100644
--- a/sound/soc/sh/Makefile
+++ b/sound/soc/sh/Makefile
@@ -6,7 +6,9 @@ obj-$(CONFIG_SND_SOC_PCM_SH7760) += snd-soc-dma-sh7760.o
snd-soc-sh7760-ac97-objs := sh7760-ac97.o
snd-soc-fsi-ak4642-objs := fsi-ak4642.o
snd-soc-fsi-da7210-objs := fsi-da7210.o
+snd-soc-migor-objs := migor.o
obj-$(CONFIG_SND_SH7760_AC97) += snd-soc-sh7760-ac97.o
obj-$(CONFIG_SND_FSI_AK4642) += snd-soc-fsi-ak4642.o
obj-$(CONFIG_SND_FSI_DA7210) += snd-soc-fsi-da7210.o
+obj-$(CONFIG_SND_SIU_MIGOR) += snd-soc-migor.o
diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c
new file mode 100644
index 0000000..cae832d
--- /dev/null
+++ b/sound/soc/sh/migor.c
@@ -0,0 +1,227 @@
+/*
+ * ALSA SoC driver for Migo-R
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+
+#include <asm/clock.h>
+
+#include <cpu/sh7722.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/wm8978.h"
+#include "siu.h"
+
+/* Default 8000Hz sampling frequency */
+static unsigned long codec_freq = 8000 * 512;
+
+/* External clock, sourced from the codec at the SIUMCKB pin */
+static unsigned long siumckb_recalc(struct clk *clk)
+{
+ return codec_freq;
+}
+
+static struct clk_ops siumckb_clk_ops = {
+ .recalc = siumckb_recalc,
+};
+
+static struct clk siumckb_clk = {
+ .name = "siumckb_clk",
+ .id = -1,
+ .ops = &siumckb_clk_ops,
+ .rate = 0, /* initialised at run-time */
+};
+
+static int migor_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ unsigned int opclk_div;
+ int ret;
+ unsigned int rate = params_rate(params);
+
+ /* Configure f_out = rate * 512 */
+ switch (rate) {
+ case 48000:
+ opclk_div = 0;
+ break;
+ case 44100:
+ opclk_div = 0;
+ break;
+ case 32000:
+ opclk_div = 0x010;
+ break;
+ case 24000:
+ opclk_div = 0x010;
+ break;
+ case 22050:
+ opclk_div = 0x010;
+ break;
+ case 16000:
+ opclk_div = 0x020;
+ break;
+ case 11025:
+ opclk_div = 0x010;
+ break;
+ default:
+ case 8000:
+ opclk_div = 0x020;
+ break;
+ }
+
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8978_OPCLKDIV, opclk_div);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8978_DACCLK, 8);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_pll(codec_dai, 0, 0, 13000000, rate * 512);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(rtd->dai->cpu_dai, SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ codec_freq = rate * 512;
+ /*
+ * This propagates the parent frequency change to children and
+ * recalculates the frequency table
+ */
+ clk_set_rate(&siumckb_clk, codec_freq);
+ dev_dbg(codec_dai->dev, "%s: configure %luHz\n", __func__, codec_freq);
+
+ snd_soc_dai_set_sysclk(rtd->dai->cpu_dai, SIU_CLKB_EXT, codec_freq / 2,
+ SND_SOC_CLOCK_IN);
+
+ return ret;
+}
+
+static struct snd_soc_ops migor_dai_ops = {
+ .hw_params = migor_hw_params,
+};
+
+static const struct snd_soc_dapm_widget migor_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_MIC("Onboard Microphone", NULL),
+ SND_SOC_DAPM_MIC("External Microphone", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ /* Headphone output connected to LHP/RHP, enable OUT4 for VMID */
+ { "Headphone", NULL, "OUT4 VMID" },
+ { "OUT4 VMID", NULL, "LHP" },
+ { "OUT4 VMID", NULL, "RHP" },
+
+ /* On-board microphone */
+ { "RMICN", NULL, "Mic Bias" },
+ { "RMICP", NULL, "Mic Bias" },
+ { "Mic Bias", NULL, "Onboard Microphone" },
+
+ /* External microphone */
+ { "LMICN", NULL, "Mic Bias" },
+ { "LMICP", NULL, "Mic Bias" },
+ { "Mic Bias", NULL, "External Microphone" },
+};
+
+static int migor_dai_init(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, migor_dapm_widgets,
+ ARRAY_SIZE(migor_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ return 0;
+}
+
+/* migor digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link migor_dai = {
+ .name = "wm8978",
+ .stream_name = "WM8978",
+ .cpu_dai = &siu_i2s_dai,
+ .codec_dai = &wm8978_dai,
+ .ops = &migor_dai_ops,
+ .init = migor_dai_init,
+};
+
+/* migor audio machine driver */
+static struct snd_soc_card snd_soc_migor = {
+ .name = "Migo-R",
+ .platform = &siu_platform,
+ .dai_link = &migor_dai,
+ .num_links = 1,
+};
+
+/* migor audio subsystem */
+static struct snd_soc_device migor_snd_devdata = {
+ .card = &snd_soc_migor,
+ .codec_dev = &soc_codec_dev_wm8978,
+};
+
+static struct platform_device *migor_snd_device;
+
+static int __init migor_init(void)
+{
+ int ret;
+
+ ret = clk_register(&siumckb_clk);
+ if (ret < 0)
+ return ret;
+
+ /* Port number used on this machine: port B */
+ migor_snd_device = platform_device_alloc("soc-audio", 1);
+ if (!migor_snd_device) {
+ ret = -ENOMEM;
+ goto epdevalloc;
+ }
+
+ platform_set_drvdata(migor_snd_device, &migor_snd_devdata);
+
+ migor_snd_devdata.dev = &migor_snd_device->dev;
+
+ ret = platform_device_add(migor_snd_device);
+ if (ret)
+ goto epdevadd;
+
+ return 0;
+
+epdevadd:
+ platform_device_put(migor_snd_device);
+epdevalloc:
+ clk_unregister(&siumckb_clk);
+ return ret;
+}
+
+static void __exit migor_exit(void)
+{
+ clk_unregister(&siumckb_clk);
+ platform_device_unregister(migor_snd_device);
+}
+
+module_init(migor_init);
+module_exit(migor_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("ALSA SoC Migor");
+MODULE_LICENSE("GPL v2");
next prev parent reply other threads:[~2010-01-22 18:17 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-19 8:08 [PATCH 0/4] ALSA: SH: add ASoC driver for SIU audio engine, an audio Guennadi Liakhovetski
2010-01-19 8:08 ` [PATCH 1/4] ASoC: add a WM8978 codec driver Guennadi Liakhovetski
2010-01-19 10:46 ` [alsa-devel] " Liam Girdwood
2010-01-20 20:01 ` Guennadi Liakhovetski
2010-01-20 20:21 ` Mark Brown
2010-01-20 20:25 ` Liam Girdwood
[not found] ` <20100119105729.GA32559@opensource.wolfsonmicro.com::587>
2010-01-20 19:50 ` Guennadi Liakhovetski
2010-01-20 20:17 ` [alsa-devel] " Mark Brown
2010-01-22 8:35 ` Guennadi Liakhovetski
2010-01-22 10:35 ` Mark Brown
2010-01-22 16:27 ` [PATCH 1/4 v2] " Guennadi Liakhovetski
2010-01-22 17:39 ` Liam Girdwood
2010-01-23 20:47 ` [alsa-devel] " Mark Brown
2010-01-26 13:04 ` Guennadi Liakhovetski
2010-01-26 13:26 ` Mark Brown
2010-01-26 14:08 ` Guennadi Liakhovetski
2010-01-26 15:22 ` Mark Brown
2010-01-19 8:09 ` [PATCH 2/4] ASoC: add DAI and platform drivers for SH SIU and support Guennadi Liakhovetski
2010-01-19 11:13 ` [alsa-devel] [PATCH 2/4] ASoC: add DAI and platform drivers Liam Girdwood
2010-01-19 12:34 ` [PATCH 2/4] ASoC: add DAI and platform drivers for SH SIU and Mark Brown
2010-01-22 18:09 ` [PATCH 2a/4 v2] ASoC: add DAI and platform / DMA drivers for SH SIU Guennadi Liakhovetski
2010-01-25 13:58 ` [PATCH 2a/4 v2] ASoC: add DAI and platform / DMA drivers for Liam Girdwood
2010-01-25 15:06 ` Mark Brown
2010-01-22 18:17 ` Guennadi Liakhovetski [this message]
2010-01-25 13:21 ` [PATCH 2b/4 v2] ASoC: add support for the sh7722 Migo-R board Mark Brown
2010-01-25 13:47 ` [alsa-devel] [PATCH 2b/4 v2] ASoC: add support for the sh7722 Liam Girdwood
2010-01-27 11:15 ` [PATCH 2b/4 v2] ASoC: add support for the sh7722 Migo-R board Guennadi Liakhovetski
2010-01-29 14:13 ` [alsa-devel] [PATCH 2b/4 v2] ASoC: add support for the sh7722 Mark Brown
2010-01-19 8:09 ` [PATCH 3/4] sh: add DMA slave definitions and SIU platform data to Guennadi Liakhovetski
2010-01-19 8:09 ` [PATCH 4/4] sh: audio support for the sh7722 Migo-R board Guennadi Liakhovetski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.1001221909050.4652@axis700.grange \
--to=g.liakhovetski@gmx.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=damm@opensource.se \
--cc=linux-sh@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
--cc=morimoto.kuninori@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox