SUPERH platform development
 help / color / mirror / Atom feed
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
To: "linux-sh@vger.kernel.org" <linux-sh@vger.kernel.org>
Cc: Ian Molton <ian@mnementh.co.uk>,
	Samuel Ortiz <sameo@linux.intel.com>,
	linux-mmc@vger.kernel.org, Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 3/3] ARM: add support for the second SD-/MMC-card slot on
Date: Fri, 14 May 2010 10:34:46 +0000	[thread overview]
Message-ID: <Pine.LNX.4.64.1005141233510.6147@axis700.grange> (raw)
In-Reply-To: <Pine.LNX.4.64.1005141228510.6147@axis700.grange>

The ap4evb board is equipped with two card slots: one SD-card slot and one
SD-/MMC-card slot. The latter is connected to the second SDHI interface on
sh7372 (SDHI1). Its power supply can be jumpered either to 1.8 or 3.3V, we fix
it at default 1.8V for now.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
 arch/arm/mach-shmobile/board-ap4evb.c |   44 +++++++++++++++++++++++++++++++-
 1 files changed, 42 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 865e024..9faed01 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -25,6 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
@@ -217,8 +218,8 @@ static struct platform_device keysc_device = {
 
 /* SDHI0 */
 static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -244,6 +245,36 @@ static struct platform_device sdhi0_device = {
 	},
 };
 
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
+	.tmio_ocr_mask	= MMC_VDD_165_195,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0xe6860000,
+		.end    = 0xe68601ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x0e80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.id             = 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
+};
+
 static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 	.clock_source = LCDC_CLK_PERIPHERAL, /* One of interface clocks */
 	.ch[0] = {
@@ -322,6 +353,7 @@ static struct platform_device *ap4evb_devices[] __initdata = {
 	&smc911x_device,
 	&keysc_device,
 	&sdhi0_device,
+	&sdhi1_device,
 	&lcdc_device,
 	&mipidsi0_device,
 };
@@ -448,6 +480,14 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
+	/* SDHI1 */
+	gpio_request(GPIO_FN_SDHICMD1, NULL);
+	gpio_request(GPIO_FN_SDHICLK1, NULL);
+	gpio_request(GPIO_FN_SDHID1_3, NULL);
+	gpio_request(GPIO_FN_SDHID1_2, NULL);
+	gpio_request(GPIO_FN_SDHID1_1, NULL);
+	gpio_request(GPIO_FN_SDHID1_0, NULL);
+
 	sh7372_add_standard_devices();
 
 	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
-- 
1.6.2.4


  parent reply	other threads:[~2010-05-14 10:34 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-14 10:34 [PATCH 0/3] tmio: Support board-specified voltages Guennadi Liakhovetski
2010-05-14 10:34 ` [PATCH 1/3] mmc: let MFD's provide supported Vdd card voltages to Guennadi Liakhovetski
2010-05-14 10:34 ` [PATCH 2/3] sh: allow platforms to specify SD-card supported voltages Guennadi Liakhovetski
2010-05-14 10:34 ` Guennadi Liakhovetski [this message]
2010-05-23 14:12   ` [PATCH 3/3 v2] ARM: mach-shmobile: add support for the second Guennadi Liakhovetski
2010-05-31  4:49     ` [PATCH 3/3 v2] ARM: mach-shmobile: add support for the second SD-/MMC-card slot on ap4evb Paul Mundt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.64.1005141233510.6147@axis700.grange \
    --to=g.liakhovetski@gmx.de \
    --cc=ian@mnementh.co.uk \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox