linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Baoquan He <bhe@redhat.com>
To: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: akpm@linux-foundation.org, glaubitz@physik.fu-berlin.de,
	linuxppc-dev@lists.ozlabs.org, linux-sh@vger.kernel.org,
	mpe@ellerman.id.au, kexec@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	"Reimar Döffinger" <Reimar.Doeffinger@gmx.de>
Subject: Re: [PATCH] crash: Default to CRASH_DUMP=n when support for it is unlikely
Date: Fri, 30 Aug 2024 14:35:28 +0800	[thread overview]
Message-ID: <ZtFoMMsS5PuFw3LF@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20240823125156.104775-1-dave@vasilevsky.ca>

On 08/23/24 at 08:51am, Dave Vasilevsky wrote:
> Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using
> Open Firmware. On these machines, the kernel refuses to boot
> from non-zero PHYSICAL_START, which occurs when CRASH_DUMP is on.
> 
> Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
> default to off for them. Users booting via some other mechanism
> can still turn it on explicitly.
> 
> Also defaults to CRASH_DUMP=n on sh.

The overrall looks good to me except of the CRASH_DUMP=n on sh, do you
have a comment about the reasoning since you have discussed with John?
Is it because of below config items?

arch/sh/Kconfig:
config ARCH_SUPPORTS_CRASH_DUMP
        def_bool BROKEN_ON_SMP
...
config PHYSICAL_START
        hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
        default MEMORY_START
	...

> 
> Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
> Reported-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
> Closes: https://lists.debian.org/debian-powerpc/2024/07/msg00001.html
> Fixes: 75bc255a7444 ("crash: clean up kdump related config items")
> ---
>  arch/arm/Kconfig       | 3 +++
>  arch/arm64/Kconfig     | 3 +++
>  arch/loongarch/Kconfig | 3 +++
>  arch/mips/Kconfig      | 3 +++
>  arch/powerpc/Kconfig   | 4 ++++
>  arch/riscv/Kconfig     | 3 +++
>  arch/s390/Kconfig      | 3 +++
>  arch/sh/Kconfig        | 3 +++
>  arch/x86/Kconfig       | 3 +++
>  kernel/Kconfig.kexec   | 2 +-
>  10 files changed, 29 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 54b2bb817a7f..200995052690 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1597,6 +1597,9 @@ config ATAGS_PROC
>  config ARCH_SUPPORTS_CRASH_DUMP
>  	def_bool y
>  
> +config ARCH_DEFAULT_CRASH_DUMP
> +	def_bool y
> +
>  config AUTO_ZRELADDR
>  	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
>  	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index a2f8ff354ca6..43e08cc8204f 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -1558,6 +1558,9 @@ config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
>  config ARCH_SUPPORTS_CRASH_DUMP
>  	def_bool y
>  
> +config ARCH_DEFAULT_CRASH_DUMP
> +	def_bool y
> +
>  config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
>  	def_bool CRASH_RESERVE
>  
> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
> index 70f169210b52..ce232ddcd27d 100644
> --- a/arch/loongarch/Kconfig
> +++ b/arch/loongarch/Kconfig
> @@ -599,6 +599,9 @@ config ARCH_SUPPORTS_KEXEC
>  config ARCH_SUPPORTS_CRASH_DUMP
>  	def_bool y
>  
> +config ARCH_DEFAULT_CRASH_DUMP
> +	def_bool y
> +
>  config ARCH_SELECTS_CRASH_DUMP
>  	def_bool y
>  	depends on CRASH_DUMP
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 60077e576935..b547f4304d0c 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -2881,6 +2881,9 @@ config ARCH_SUPPORTS_KEXEC
>  config ARCH_SUPPORTS_CRASH_DUMP
>  	def_bool y
>  
> +config ARCH_DEFAULT_CRASH_DUMP
> +	def_bool y
> +
>  config PHYSICAL_START
>  	hex "Physical address where the kernel is loaded"
>  	default "0xffffffff84000000"
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index d7b09b064a8a..0f3c1f958eac 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -682,6 +682,10 @@ config RELOCATABLE_TEST
>  config ARCH_SUPPORTS_CRASH_DUMP
>  	def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
>  
> +config ARCH_DEFAULT_CRASH_DUMP
> +	bool
> +	default y if !PPC_BOOK3S_32
> +
>  config ARCH_SELECTS_CRASH_DUMP
>  	def_bool y
>  	depends on CRASH_DUMP
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 0f3cd7c3a436..eb247b5ee569 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -880,6 +880,9 @@ config ARCH_SUPPORTS_KEXEC_PURGATORY
>  config ARCH_SUPPORTS_CRASH_DUMP
>  	def_bool y
>  
> +config ARCH_DEFAULT_CRASH_DUMP
> +	def_bool y
> +
>  config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
>  	def_bool CRASH_RESERVE
>  
> diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
> index a822f952f64a..05a1fb408471 100644
> --- a/arch/s390/Kconfig
> +++ b/arch/s390/Kconfig
> @@ -275,6 +275,9 @@ config ARCH_SUPPORTS_CRASH_DUMP
>  	  This option also enables s390 zfcpdump.
>  	  See also <file:Documentation/arch/s390/zfcpdump.rst>
>  
> +config ARCH_DEFAULT_CRASH_DUMP
> +	def_bool y
> +
>  menu "Processor type and features"
>  
>  config HAVE_MARCH_Z10_FEATURES
> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
> index 1aa3c4a0c5b2..b04cfa23378c 100644
> --- a/arch/sh/Kconfig
> +++ b/arch/sh/Kconfig
> @@ -549,6 +549,9 @@ config ARCH_SUPPORTS_KEXEC
>  config ARCH_SUPPORTS_CRASH_DUMP
>  	def_bool BROKEN_ON_SMP
>  
> +config ARCH_DEFAULT_CRASH_DUMP
> +	def_bool n
> +
>  config ARCH_SUPPORTS_KEXEC_JUMP
>  	def_bool y
>  
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 007bab9f2a0e..aa4666bb9e9c 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -2087,6 +2087,9 @@ config ARCH_SUPPORTS_KEXEC_JUMP
>  config ARCH_SUPPORTS_CRASH_DUMP
>  	def_bool X86_64 || (X86_32 && HIGHMEM)
>  
> +config ARCH_DEFAULT_CRASH_DUMP
> +	def_bool y
> +
>  config ARCH_SUPPORTS_CRASH_HOTPLUG
>  	def_bool y
>  
> diff --git a/kernel/Kconfig.kexec b/kernel/Kconfig.kexec
> index 6c34e63c88ff..4d111f871951 100644
> --- a/kernel/Kconfig.kexec
> +++ b/kernel/Kconfig.kexec
> @@ -97,7 +97,7 @@ config KEXEC_JUMP
>  
>  config CRASH_DUMP
>  	bool "kernel crash dumps"
> -	default y
> +	default ARCH_DEFAULT_CRASH_DUMP
>  	depends on ARCH_SUPPORTS_CRASH_DUMP
>  	depends on KEXEC_CORE
>  	select VMCORE_INFO
> -- 
> 2.34.1
> 


  parent reply	other threads:[~2024-08-30  6:35 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-23 12:51 [PATCH] crash: Default to CRASH_DUMP=n when support for it is unlikely Dave Vasilevsky
2024-08-23 13:13 ` Geert Uytterhoeven
2024-08-23 18:16   ` John Paul Adrian Glaubitz
2024-08-27  6:22     ` Baoquan He
2024-08-27  6:37       ` John Paul Adrian Glaubitz
2024-08-27  9:01         ` Baoquan He
2024-08-26  2:02   ` Michael Ellerman
2024-08-26  5:38     ` John Paul Adrian Glaubitz
2024-08-26  6:03       ` Dave Vasilevsky
2024-08-30  3:15 ` Baoquan He
2024-08-30  3:37   ` Dave Vasilevsky
2024-08-30  6:30     ` Baoquan He
2024-08-30  6:35 ` Baoquan He [this message]
2024-08-30  7:24   ` Dave Vasilevsky
2024-09-08 19:57 ` Dave Vasilevsky
2024-09-09  2:35   ` Baoquan He
2024-09-09  6:40   ` Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZtFoMMsS5PuFw3LF@MiWiFi-R3L-srv \
    --to=bhe@redhat.com \
    --cc=Reimar.Doeffinger@gmx.de \
    --cc=akpm@linux-foundation.org \
    --cc=dave@vasilevsky.ca \
    --cc=glaubitz@physik.fu-berlin.de \
    --cc=kexec@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).