* [PATCH 01/13] ARM: shmobile: r8a73a4: Add CPG register bits header
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
@ 2015-03-05 1:57 ` Simon Horman
2015-03-05 1:57 ` [PATCH 02/13] ARM: shmobile: r8a73a4: Common clock framework DT description Simon Horman
` (12 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:57 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
include/dt-bindings/clock/r8a73a4-clock.h | 62 +++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 include/dt-bindings/clock/r8a73a4-clock.h
diff --git a/include/dt-bindings/clock/r8a73a4-clock.h b/include/dt-bindings/clock/r8a73a4-clock.h
new file mode 100644
index 0000000..9a4b4c9
--- /dev/null
+++ b/include/dt-bindings/clock/r8a73a4-clock.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A73A4_H__
+#define __DT_BINDINGS_CLOCK_R8A73A4_H__
+
+/* CPG */
+#define R8A73A4_CLK_MAIN 0
+#define R8A73A4_CLK_PLL0 1
+#define R8A73A4_CLK_PLL1 2
+#define R8A73A4_CLK_PLL2 3
+#define R8A73A4_CLK_PLL2S 4
+#define R8A73A4_CLK_PLL2H 5
+#define R8A73A4_CLK_Z 6
+#define R8A73A4_CLK_Z2 7
+#define R8A73A4_CLK_I 8
+#define R8A73A4_CLK_M3 9
+#define R8A73A4_CLK_B 10
+#define R8A73A4_CLK_M1 11
+#define R8A73A4_CLK_M2 12
+#define R8A73A4_CLK_ZX 13
+#define R8A73A4_CLK_ZS 14
+#define R8A73A4_CLK_HP 15
+
+/* MSTP2 */
+#define R8A73A4_CLK_DMAC 18
+#define R8A73A4_CLK_SCIFB3 17
+#define R8A73A4_CLK_SCIFB2 16
+#define R8A73A4_CLK_SCIFB1 7
+#define R8A73A4_CLK_SCIFB0 6
+#define R8A73A4_CLK_SCIFA0 4
+#define R8A73A4_CLK_SCIFA1 3
+
+/* MSTP3 */
+#define R8A73A4_CLK_CMT1 29
+#define R8A73A4_CLK_IIC1 23
+#define R8A73A4_CLK_IIC0 18
+#define R8A73A4_CLK_IIC7 17
+#define R8A73A4_CLK_IIC6 16
+#define R8A73A4_CLK_MMCIF0 15
+#define R8A73A4_CLK_SDHI0 14
+#define R8A73A4_CLK_SDHI1 13
+#define R8A73A4_CLK_SDHI2 12
+#define R8A73A4_CLK_MMCIF1 5
+#define R8A73A4_CLK_IIC2 0
+
+/* MSTP4 */
+#define R8A73A4_CLK_IIC3 11
+#define R8A73A4_CLK_IIC4 10
+#define R8A73A4_CLK_IIC5 9
+
+/* MSTP5 */
+#define R8A73A4_CLK_THERMAL 22
+#define R8A73A4_CLK_IIC8 15
+
+#endif /* __DT_BINDINGS_CLOCK_R8A73A4_H__ */
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 02/13] ARM: shmobile: r8a73a4: Common clock framework DT description
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
2015-03-05 1:57 ` [PATCH 01/13] ARM: shmobile: r8a73a4: Add CPG register bits header Simon Horman
@ 2015-03-05 1:57 ` Simon Horman
2015-03-05 1:57 ` [PATCH 03/13] ARM: shmobile: ape6evm: Disable legacy clock initialization Simon Horman
` (11 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:57 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Declares all r8a73a4 clocks supported by the legacy clock framework.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 294 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 294 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 38136d9..a1adfe4 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -9,6 +9,7 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/clock/r8a73a4-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -377,4 +378,297 @@
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* External root clocks */
+ extalr_clk: extalr_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "extalr";
+ };
+ extal1_clk: extal1_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "extal1";
+ };
+ extal2_clk: extal2_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "extal2";
+ };
+ fsiack_clk: fsiack_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "fsiack";
+ };
+ fsibck_clk: fsibck_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "fsibck";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a73a4-cpg-clocks";
+ reg = <0 0xe6150000 0 0x10000>;
+ clocks = <&extal1_clk>, <&extal2_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll2",
+ "pll2s", "pll2h", "z", "z2",
+ "i", "m3", "b", "m1", "m2",
+ "zx", "zs", "hp";
+ };
+
+ /* Variable factor clocks (DIV6) */
+ zb_clk: zb_clk@e6150010 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150010 0 4>;
+ clocks = <&pll1_div2_clk>, <0>,
+ <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "zb";
+ };
+ sdhi0_clk: sdhi0_clk@e6150074 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150074 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sdhi0ck";
+ };
+ sdhi1_clk: sdhi1_clk@e6150078 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150078 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sdhi1ck";
+ };
+ sdhi2_clk: sdhi2_clk@e615007c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615007c 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sdhi2ck";
+ };
+ mmc0_clk: mmc0_clk@e6150240 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150240 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mmc0";
+ };
+ mmc1_clk: mmc1_clk@e6150244 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150244 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mmc1";
+ };
+ vclk1_clk: vclk1_clk@e6150008 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150008 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk1";
+ };
+ vclk2_clk: vclk2_clk@e615000c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615000c 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk2";
+ };
+ vclk3_clk: vclk3_clk@e615001c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615001c 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk3";
+ };
+ vclk4_clk: vclk4_clk@e6150014 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150014 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk4";
+ };
+ vclk5_clk: vclk5_clk@e6150034 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150034 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <0>, <&extal2_clk>, <&main_div2_clk>,
+ <&extalr_clk>, <0>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "vclk5";
+ };
+ fsia_clk: fsia_clk@e6150018 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150018 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <&fsiack_clk>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "fsia";
+ };
+ fsib_clk: fsib_clk@e6150090 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150090 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <&fsibck_clk>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "fsib";
+ };
+ mp_clk: mp_clk@e6150080 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150080 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <&extal2_clk>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mp";
+ };
+ m4_clk: m4_clk@e6150098 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150098 0 4>;
+ clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>;
+ #clock-cells = <0>;
+ clock-output-names = "m4";
+ };
+ hsi_clk: hsi_clk@e615026c {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615026c 0 4>;
+ clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>,
+ <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>;
+ #clock-cells = <0>;
+ clock-output-names = "hsi";
+ };
+ spuv_clk: spuv_clk@e6150094 {
+ compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150094 0 4>;
+ clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+ <&extal2_clk>, <&extal2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "spuv";
+ };
+
+ /* Fixed factor clocks */
+ main_div2_clk: main_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A73A4_CLK_MAIN>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "main_div2";
+ };
+ pll0_div2_clk: pll0_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A73A4_CLK_PLL0>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll0_div2";
+ };
+ pll1_div2_clk: pll1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A73A4_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div2";
+ };
+ extal1_div2_clk: extal1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal1_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "extal1_div2";
+ };
+
+ /* Gate clocks */
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1
+ R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1
+ R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3
+ R8A73A4_CLK_DMAC
+ >;
+ clock-output-names + "scifa0", "scifa1", "scifb0", "scifb1",
+ "scifb2", "scifb3", "dmac";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+ clocks = <&cpg_clocks R8A73A4_CLK_HP>, <&mmc1_clk>,
+ <&sdhi2_clk>, <&sdhi1_clk>, <&sdhi0_clk>,
+ <&mmc0_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
+ <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks
+ R8A73A4_CLK_HP>, <&cpg_clocks
+ R8A73A4_CLK_HP>, <&extalr_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_IIC2 R8A73A4_CLK_MMCIF1
+ R8A73A4_CLK_SDHI2 R8A73A4_CLK_SDHI1
+ R8A73A4_CLK_SDHI0 R8A73A4_CLK_MMCIF0
+ R8A73A4_CLK_IIC6 R8A73A4_CLK_IIC7
+ R8A73A4_CLK_IIC0 R8A73A4_CLK_IIC1
+ R8A73A4_CLK_CMT1
+ >;
+ clock-output-names + "iic2", "mmcif1", "sdhi2", "sdhi1", "sdhi0",
+ "mmcif0", "iic6", "iic7", "iic0", "iic1",
+ "cmt1";
+ };
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
+ <&cpg_clocks R8A73A4_CLK_HP>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4
+ R8A73A4_CLK_IIC3
+ >;
+ clock-output-names + "iic5", "iic4", "iic3";
+ };
+ mstp5_clks: mstp5_clks@e6150144 {
+ compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+ clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8
+ >;
+ clock-output-names + "thermal", "iic8";
+ };
+ };
};
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 03/13] ARM: shmobile: ape6evm: Disable legacy clock initialization
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
2015-03-05 1:57 ` [PATCH 01/13] ARM: shmobile: r8a73a4: Add CPG register bits header Simon Horman
2015-03-05 1:57 ` [PATCH 02/13] ARM: shmobile: r8a73a4: Common clock framework DT description Simon Horman
@ 2015-03-05 1:57 ` Simon Horman
2015-03-05 1:57 ` [PATCH 04/13] ARM: shmobile: r8a73a4: Add MSTP clock assignments to DT Simon Horman
` (10 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:57 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Disables r8a73a4_clock_init() if CCF is enabled.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/board-ape6evm-reference.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index 3b68370..dd5bc63 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -29,7 +29,7 @@
static void __init ape6evm_add_standard_devices(void)
{
-
+#ifndef CONFIG_COMMON_CLK
struct clk *parent;
struct clk *mp;
@@ -43,6 +43,7 @@ static void __init ape6evm_add_standard_devices(void)
clk_set_parent(mp, parent);
clk_put(parent);
clk_put(mp);
+#endif
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 04/13] ARM: shmobile: r8a73a4: Add MSTP clock assignments to DT
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (2 preceding siblings ...)
2015-03-05 1:57 ` [PATCH 03/13] ARM: shmobile: ape6evm: Disable legacy clock initialization Simon Horman
@ 2015-03-05 1:57 ` Simon Horman
2015-03-05 1:57 ` [PATCH 05/13] ARM: shmobile: r8a73a4 dtsi: Add Bus State Controller node Simon Horman
` (9 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:57 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Assigns clocks to dmac, i2c*, cmt1, thermal, scif*, sdhi*, and mmcif*.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index a1adfe4..fdcca5d 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -88,6 +88,7 @@
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14", "ch15",
"ch16", "ch17", "ch18", "ch19";
+ clocks = <&mstp2_clks R8A73A4_CLK_DMAC>;
};
};
@@ -120,6 +121,7 @@
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x428>;
interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IIC5>;
status = "disabled";
};
@@ -128,6 +130,8 @@
compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
+ clock-names = "fck";
renesas,channels-mask = <0xff>;
@@ -211,6 +215,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
};
i2c0: i2c@e6500000 {
@@ -219,6 +224,7 @@
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x428>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC0>;
status = "disabled";
};
@@ -228,6 +234,7 @@
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x428>;
interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC1>;
status = "disabled";
};
@@ -237,6 +244,7 @@
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x428>;
interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC2>;
status = "disabled";
};
@@ -246,6 +254,7 @@
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6530000 0 0x428>;
interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IIC3>;
status = "disabled";
};
@@ -255,6 +264,7 @@
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6540000 0 0x428>;
interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IIC4>;
status = "disabled";
};
@@ -264,6 +274,7 @@
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6550000 0 0x428>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC6>;
status = "disabled";
};
@@ -273,6 +284,7 @@
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6560000 0 0x428>;
interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_IIC7>;
status = "disabled";
};
@@ -282,6 +294,7 @@
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6570000 0 0x428>;
interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A73A4_CLK_IIC8>;
status = "disabled";
};
@@ -289,6 +302,8 @@
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6c20000 0 0x100>;
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -296,6 +311,8 @@
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6c30000 0 0x100>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -303,6 +320,8 @@
compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
reg = <0 0xe6c40000 0 0x100>;
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -310,6 +329,8 @@
compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
reg = <0 0xe6c50000 0 0x100>;
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -317,6 +338,8 @@
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -324,6 +347,8 @@
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6cf0000 0 0x100>;
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -331,6 +356,7 @@
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>;
cap-sd-highspeed;
status = "disabled";
};
@@ -339,6 +365,7 @@
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee120000 0 0x100>;
interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>;
cap-sd-highspeed;
status = "disabled";
};
@@ -347,6 +374,7 @@
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee140000 0 0x100>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>;
cap-sd-highspeed;
status = "disabled";
};
@@ -355,6 +383,7 @@
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
reg-io-width = <4>;
status = "disabled";
};
@@ -363,6 +392,7 @@
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
reg-io-width = <4>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 05/13] ARM: shmobile: r8a73a4 dtsi: Add Bus State Controller node
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (3 preceding siblings ...)
2015-03-05 1:57 ` [PATCH 04/13] ARM: shmobile: r8a73a4: Add MSTP clock assignments to DT Simon Horman
@ 2015-03-05 1:57 ` Simon Horman
2015-03-05 1:57 ` [PATCH 06/13] ARM: shmobile: ape6evm dts: Move Ethernet node to BSC Simon Horman
` (8 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:57 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a node for the Bus State Controller (BSC) on r8a73a4, to which
multiple external devices can be connected.
The BSC is driven by the ZB clock, and located in PM domain C4.
A reference to the latter will be added later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index fdcca5d..77bd35c 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -409,6 +409,16 @@
interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ bsc: bus@fec10000 {
+ compatible = "renesas,bsc-r8a73a4", "renesas,bsc",
+ "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
+ reg = <0 0xfec10000 0 0x400>;
+ clocks = <&zb_clk>;
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 06/13] ARM: shmobile: ape6evm dts: Move Ethernet node to BSC
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (4 preceding siblings ...)
2015-03-05 1:57 ` [PATCH 05/13] ARM: shmobile: r8a73a4 dtsi: Add Bus State Controller node Simon Horman
@ 2015-03-05 1:57 ` Simon Horman
2015-03-05 1:57 ` [PATCH 07/13] ARM: shmobile: r8a73a4: Move pfc node to work around probe ordering bug Simon Horman
` (7 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:57 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Move the Ethernet node from the ad-hoc lbsc node to the BSC node,
as its connected to the Bus State Controller. This allows the system to
know the right position of the Ethernet node in the clock and PM domain
hierarchy, and manage the clock and PM domain appropriately.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 35 +++++++++++++++--------------------
1 file changed, 15 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index 0d50bef..44c4cac 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -72,26 +72,6 @@
regulator-always-on;
};
- lbsc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x20000000>;
-
- ethernet@8000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x08000000 0x1000>;
- interrupt-parent = <&irqc1>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
- phy-mode = "mii";
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vdd33a-supply = <&ape6evm_fixed_3v3>;
- vddvario-supply = <&ape6evm_fixed_1v8>;
- };
- };
-
leds {
compatible = "gpio-leds";
led1 {
@@ -184,6 +164,21 @@
voltage-tolerance = <1>; /* 1% */
};
+&bsc {
+ ethernet@8000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x08000000 0x1000>;
+ interrupt-parent = <&irqc1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&ape6evm_fixed_3v3>;
+ vddvario-supply = <&ape6evm_fixed_1v8>;
+ };
+};
+
&cmt1 {
status = "okay";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 07/13] ARM: shmobile: r8a73a4: Move pfc node to work around probe ordering bug
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (5 preceding siblings ...)
2015-03-05 1:57 ` [PATCH 06/13] ARM: shmobile: ape6evm dts: Move Ethernet node to BSC Simon Horman
@ 2015-03-05 1:57 ` Simon Horman
2015-03-05 1:58 ` [PATCH 08/13] ARM: shmobile: ape6evm-reference: Remove board C code and DT file Simon Horman
` (6 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:57 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Currently the pin function controller (which is also a GPIO controller)
is instantiated before the interrupt controllers due to the order in the
DTS. At that time, the irq domains for the interrupt controllers
referenced by its interrupts-extended property cannot be found yet:
irq: no irq domain found for /interrupt-controller@e61c0000 !
Nevertheless, the core OF probing code ignores this failure, besides a
debug message that's not normally printed:
not all legacy IRQ resources mapped for pfc
and continues initialization of the device. Then, the sh-pfc driver
cannot find any IRQ resources, and thinks no interrupts are available,
causing gpio-keys to fail later:
gpio-keys keyboard: Unable to claim irq 0; error -22
gpio-keys: probe of keyboard failed with error -22
Move the pin function controller node after the interrupt controller
nodes it references to work around the bug in the core OF probing code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 46 +++++++++++++++++++++---------------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 77bd35c..d41201d 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -92,29 +92,6 @@
};
};
- pfc: pfc@e6050000 {
- compatible = "renesas,pfc-r8a73a4";
- reg = <0 0xe6050000 0 0x9000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts-extended - <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
- <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
- <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
- <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
- <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
- <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
- <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
- <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
- <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>,
- <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>,
- <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
- <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
- <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
- <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
- <&irqc1 24 0>, <&irqc1 25 0>;
- };
-
i2c5: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -210,6 +187,29 @@
<0 57 IRQ_TYPE_LEVEL_HIGH>;
};
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-r8a73a4";
+ reg = <0 0xe6050000 0 0x9000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts-extended + <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
+ <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
+ <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
+ <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
+ <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
+ <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
+ <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
+ <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
+ <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>,
+ <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>,
+ <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
+ <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
+ <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
+ <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
+ <&irqc1 24 0>, <&irqc1 25 0>;
+ };
+
thermal@e61f0000 {
compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 08/13] ARM: shmobile: ape6evm-reference: Remove board C code and DT file
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (6 preceding siblings ...)
2015-03-05 1:57 ` [PATCH 07/13] ARM: shmobile: r8a73a4: Move pfc node to work around probe ordering bug Simon Horman
@ 2015-03-05 1:58 ` Simon Horman
2015-03-05 1:58 ` [PATCH 09/13] ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform Simon Horman
` (5 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:58 UTC (permalink / raw)
To: linux-arm-kernel
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Now that the r8a73a4 generic multiplatform case has the same features as the
APE6EVM DT reference board code, we get rid of the latter. DT reference
code in the future shall make use of the r8a73a4 multiplatform support code
with the generic SoC machine vector.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Update Documentation/devicetree/bindings/arm/shmobile.txt]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 -
arch/arm/boot/dts/Makefile | 1 -
arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts | 156 ---------------------
arch/arm/mach-shmobile/Kconfig | 12 --
arch/arm/mach-shmobile/Makefile | 1 -
arch/arm/mach-shmobile/Makefile.boot | 1 -
arch/arm/mach-shmobile/board-ape6evm-reference.c | 61 --------
7 files changed, 234 deletions(-)
delete mode 100644 arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
delete mode 100644 arch/arm/mach-shmobile/board-ape6evm-reference.c
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 51147cb..18a8591 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -37,8 +37,6 @@ Boards:
compatible = "renesas,alt", "renesas,r8a7794"
- APE6-EVM
compatible = "renesas,ape6evm", "renesas,r8a73a4"
- - APE6-EVM - Reference Device Tree Implementation
- compatible = "renesas,ape6evm-reference", "renesas,r8a73a4"
- Atmark Techno Armadillo-800 EVA
compatible = "renesas,armadillo800eva"
- BOCK-W
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..d3e6cf3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -465,7 +465,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-torbreck.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
r8a73a4-ape6evm.dtb \
- r8a73a4-ape6evm-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
deleted file mode 100644
index b3d8f84..0000000
--- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Device Tree Source for the APE6EVM board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a73a4.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "APE6EVM";
- compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
-
- aliases {
- serial0 = &scifa0;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw";
- stdout-path = &scifa0;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- memory@200000000 {
- device_type = "memory";
- reg = <2 0x00000000 0 0x40000000>;
- };
-
- vcc_mmc0: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "MMC0 Vcc";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- vcc_sdhi0: regulator@1 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- /* Common 3.3V rail, used by several devices on APE6EVM */
- ape6evm_fixed_3v3: regulator@2 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- lbsc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0x20000000>;
- };
-};
-
-&i2c5 {
- status = "okay";
- vdd_dvfs: max8973@1b {
- compatible = "maxim,max8973";
- reg = <0x1b>;
-
- regulator-min-microvolt = <935000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_dvfs>;
- operating-points = <
- /* kHz uV */
- 1950000 1115000
- 1462500 995000
- >;
- voltage-tolerance = <1>; /* 1% */
-};
-
-&cmt1 {
- status = "okay";
-};
-
-&pfc {
- scifa0_pins: serial0 {
- renesas,groups = "scifa0_data";
- renesas,function = "scifa0";
- };
-
- mmc0_pins: mmc {
- renesas,groups = "mmc0_data8", "mmc0_ctrl";
- renesas,function = "mmc0";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
- renesas,function = "sdhi0";
- };
-
- sdhi1_pins: sd1 {
- renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
- renesas,function = "sdhi1";
- };
-};
-
-&mmcif0 {
- vmmc-supply = <&vcc_mmc0>;
- bus-width = <8>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- status = "okay";
-};
-
-&scifa0 {
- pinctrl-0 = <&scifa0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&sdhi0 {
- vmmc-supply = <&vcc_sdhi0>;
- bus-width = <4>;
- toshiba,mmc-wrprotect-disable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhi0_pins>;
- status = "okay";
-};
-
-&sdhi1 {
- vmmc-supply = <&ape6evm_fixed_3v3>;
- bus-width = <4>;
- broken-cd;
- toshiba,mmc-wrprotect-disable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhi1_pins>;
- status = "okay";
-};
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 2f36c85..f8977e7 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -142,18 +142,6 @@ config MACH_APE6EVM
select SMSC_PHY if SMSC911X
select USE_OF
-config MACH_APE6EVM_REFERENCE
- bool "APE6EVM board - Reference Device Tree Implementation"
- depends on ARCH_R8A73A4
- select SMSC_PHY if SMSC911X
- select USE_OF
- ---help---
- Use reference implementation of APE6EVM board support
- which makes a greater use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index d53996e..40f82ee 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -59,7 +59,6 @@ ifdef CONFIG_ARCH_SHMOBILE_MULTI
obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o
else
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
-obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 02532be..e67a6c9 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,7 +1,6 @@
# per-board load address for uImage
loadaddr-y : loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
-loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
deleted file mode 100644
index dd5bc63..0000000
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * APE6EVM board support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_device.h>
-#include <linux/sh_clk.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "r8a73a4.h"
-
-static void __init ape6evm_add_standard_devices(void)
-{
-#ifndef CONFIG_COMMON_CLK
- struct clk *parent;
- struct clk *mp;
-
- r8a73a4_clock_init();
-
- /* MP clock parent = extal2 */
- parent = clk_get(NULL, "extal2");
- mp = clk_get(NULL, "mp");
- BUG_ON(IS_ERR(parent) || IS_ERR(mp));
-
- clk_set_parent(mp, parent);
- clk_put(parent);
- clk_put(mp);
-#endif
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *ape6evm_boards_compat_dt[] __initdata = {
- "renesas,ape6evm-reference",
- NULL,
-};
-
-DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = shmobile_init_delay,
- .init_machine = ape6evm_add_standard_devices,
- .init_late = shmobile_init_late,
- .dt_compat = ape6evm_boards_compat_dt,
-MACHINE_END
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 09/13] ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (7 preceding siblings ...)
2015-03-05 1:58 ` [PATCH 08/13] ARM: shmobile: ape6evm-reference: Remove board C code and DT file Simon Horman
@ 2015-03-05 1:58 ` Simon Horman
2015-03-05 1:58 ` [PATCH 10/13] ARM: shmobile: ape6evm dts: Drop console= bootargs parameter Simon Horman
` (4 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:58 UTC (permalink / raw)
To: linux-arm-kernel
This removes the remains of the legacy ape6evm platform.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
MAINTAINERS | 1 -
arch/arm/boot/dts/Makefile | 1 -
arch/arm/configs/ape6evm_defconfig | 109 ------------
arch/arm/mach-shmobile/Kconfig | 13 --
arch/arm/mach-shmobile/Makefile | 1 -
arch/arm/mach-shmobile/Makefile.boot | 1 -
arch/arm/mach-shmobile/board-ape6evm.c | 306 ---------------------------------
7 files changed, 432 deletions(-)
delete mode 100644 arch/arm/configs/ape6evm_defconfig
delete mode 100644 arch/arm/mach-shmobile/board-ape6evm.c
diff --git a/MAINTAINERS b/MAINTAINERS
index ddc5a8c..5181e7a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1414,7 +1414,6 @@ F: arch/arm/boot/dts/emev2*
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
-F: arch/arm/configs/ape6evm_defconfig
F: arch/arm/configs/armadillo800eva_defconfig
F: arch/arm/configs/bockw_defconfig
F: arch/arm/configs/kzm9g_defconfig
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d3e6cf3..3dbd553 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -464,7 +464,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
- r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig
deleted file mode 100644
index 9e9a72e..0000000
--- a/arch/arm/configs/ape6evm_defconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT\x16
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A73A4=y
-CONFIG_MACH_APE6EVM=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BPREDICT_DISABLE=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_SMP=y
-CONFIG_SCHED_MC=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_NR_CPUS=8
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-# CONFIG_HW_PERF_EVENTS is not set
-# CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_NETFILTER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER_USER_HELPER is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS\x12
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SH_PFC=y
-CONFIG_GPIOLIB=y
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_RCAR_THERMAL=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_MAX8973=y
-# CONFIG_HID is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_DMADEVICES=y
-CONFIG_SH_DMAE=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_ENABLE_DEFAULT_TRACERS=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index f8977e7..5fc4756 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -108,13 +108,6 @@ config ARCH_SH73A0
select SH_INTC
select RENESAS_INTC_IRQPIN
-config ARCH_R8A73A4
- bool "R-Mobile APE6 (R8A73A40)"
- select ARCH_RMOBILE
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
- select RENESAS_IRQC
-
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_RMOBILE
@@ -136,12 +129,6 @@ config ARCH_R8A7779
comment "Renesas ARM SoCs Board Type"
-config MACH_APE6EVM
- bool "APE6EVM board"
- depends on ARCH_R8A73A4
- select SMSC_PHY if SMSC911X
- select USE_OF
-
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 40f82ee..963d985 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -58,7 +58,6 @@ obj-$(CONFIG_ARCH_SH7372) += entry-intc.o sleep-sh7372.o
ifdef CONFIG_ARCH_SHMOBILE_MULTI
obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o
else
-obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index e67a6c9..d893aa4 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,6 +1,5 @@
# per-board load address for uImage
loadaddr-y :-loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
deleted file mode 100644
index 444f22d..0000000
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * APE6EVM board support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/kernel.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_clk.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a73a4.h"
-
-/* LEDS */
-static struct gpio_led ape6evm_leds[] = {
- {
- .name = "gnss-en",
- .gpio = 28,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "nfc-nrst",
- .gpio = 126,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "gnss-nrst",
- .gpio = 132,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "bt-wakeup",
- .gpio = 232,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "strobe",
- .gpio = 250,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }, {
- .name = "bbresetout",
- .gpio = 288,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
-};
-
-static __initdata struct gpio_led_platform_data ape6evm_leds_pdata = {
- .leds = ape6evm_leds,
- .num_leds = ARRAY_SIZE(ape6evm_leds),
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d, ...) \
- { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
- GPIO_KEY(KEY_0, 324, "S16"),
- GPIO_KEY(KEY_MENU, 325, "S17"),
- GPIO_KEY(KEY_HOME, 326, "S18"),
- GPIO_KEY(KEY_BACK, 327, "S19"),
- GPIO_KEY(KEY_VOLUMEUP, 328, "S20"),
- GPIO_KEY(KEY_VOLUMEDOWN, 329, "S21"),
-};
-
-static struct gpio_keys_platform_data ape6evm_keys_pdata __initdata = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* SMSC LAN9220 */
-static const struct resource lan9220_res[] __initconst = {
- DEFINE_RES_MEM(0x08000000, 0x1000),
- {
- .start = irq_pin(40), /* IRQ40 */
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
- },
-};
-
-static const struct smsc911x_platform_config lan9220_data __initconst = {
- .flags = SMSC911X_USE_32BIT,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-};
-
-/*
- * MMC0 power supplies:
- * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage
- * regulator. Until support for it is added to this file we simulate the
- * Vcc supply by a fixed always-on regulator
- */
-static struct regulator_consumer_supply vcc_mmc0_consumers[] -{
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-};
-
-/*
- * SDHI0 power supplies:
- * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is
- * provided by the same tps80032 regulator as both MMC0 voltages - see comment
- * above
- */
-static struct regulator_consumer_supply vcc_sdhi0_consumers[] -{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-};
-
-static struct regulator_init_data vcc_sdhi0_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers),
- .consumer_supplies = vcc_sdhi0_consumers,
-};
-
-static const struct fixed_voltage_config vcc_sdhi0_info __initconst = {
- .supply_name = "SDHI0 Vcc",
- .microvolts = 3300000,
- .gpio = 76,
- .enable_high = 1,
- .init_data = &vcc_sdhi0_init_data,
-};
-
-/*
- * SDHI1 power supplies:
- * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V
- */
-static struct regulator_consumer_supply vcc_sdhi1_consumers[] -{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-};
-
-/* MMCIF */
-static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = {
- .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
- .slave_id_tx = SHDMA_SLAVE_MMCIF0_TX,
- .slave_id_rx = SHDMA_SLAVE_MMCIF0_RX,
- .ccs_unsupported = true,
-};
-
-static const struct resource mmcif0_resources[] __initconst = {
- DEFINE_RES_MEM(0xee200000, 0x100),
- DEFINE_RES_IRQ(gic_spi(169)),
-};
-
-/* SDHI0 */
-static const struct sh_mobile_sdhi_info sdhi0_pdata __initconst = {
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
-};
-
-static const struct resource sdhi0_resources[] __initconst = {
- DEFINE_RES_MEM(0xee100000, 0x100),
- DEFINE_RES_IRQ(gic_spi(165)),
-};
-
-/* SDHI1 */
-static const struct sh_mobile_sdhi_info sdhi1_pdata __initconst = {
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_NEEDS_POLL,
-};
-
-static const struct resource sdhi1_resources[] __initconst = {
- DEFINE_RES_MEM(0xee120000, 0x100),
- DEFINE_RES_IRQ(gic_spi(166)),
-};
-
-static const struct pinctrl_map ape6evm_pinctrl_map[] __initconst = {
- /* SCIFA0 console */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
- "scifa0_data", "scifa0"),
- /* SMSC */
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4",
- "irqc_irq40", "irqc"),
- /* MMCIF0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
- "mmc0_data8", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
- "mmc0_ctrl", "mmc0"),
- /* SDHI0: uSD: no WP */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
- "sdhi0_cd", "sdhi0"),
- /* SDHI1 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
- "sdhi1_data4", "sdhi1"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
- "sdhi1_ctrl", "sdhi1"),
-};
-
-static void __init ape6evm_add_standard_devices(void)
-{
-
- struct clk *parent;
- struct clk *mp;
-
- r8a73a4_clock_init();
-
- /* MP clock parent = extal2 */
- parent = clk_get(NULL, "extal2");
- mp = clk_get(NULL, "mp");
- BUG_ON(IS_ERR(parent) || IS_ERR(mp));
-
- clk_set_parent(mp, parent);
- clk_put(parent);
- clk_put(mp);
-
- pinctrl_register_mappings(ape6evm_pinctrl_map,
- ARRAY_SIZE(ape6evm_pinctrl_map));
- r8a73a4_pinmux_init();
- r8a73a4_add_standard_devices();
-
- /* LAN9220 ethernet */
- gpio_request_one(270, GPIOF_OUT_INIT_HIGH, NULL); /* smsc9220 RESET */
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- platform_device_register_resndata(NULL, "smsc911x", -1,
- lan9220_res, ARRAY_SIZE(lan9220_res),
- &lan9220_data, sizeof(lan9220_data));
-
- regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers,
- ARRAY_SIZE(vcc_mmc0_consumers), 2800000);
- platform_device_register_resndata(NULL, "sh_mmcif", 0,
- mmcif0_resources, ARRAY_SIZE(mmcif0_resources),
- &mmcif0_pdata, sizeof(mmcif0_pdata));
- platform_device_register_data(NULL, "reg-fixed-voltage", 2,
- &vcc_sdhi0_info, sizeof(vcc_sdhi0_info));
- platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0,
- sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
- &sdhi0_pdata, sizeof(sdhi0_pdata));
- regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers,
- ARRAY_SIZE(vcc_sdhi1_consumers), 3300000);
- platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1,
- sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
- &sdhi1_pdata, sizeof(sdhi1_pdata));
- platform_device_register_data(NULL, "gpio-keys", -1,
- &ape6evm_keys_pdata,
- sizeof(ape6evm_keys_pdata));
- platform_device_register_data(NULL, "leds-gpio", -1,
- &ape6evm_leds_pdata,
- sizeof(ape6evm_leds_pdata));
-}
-
-static void __init ape6evm_legacy_init_time(void)
-{
- /* Do not invoke DT-based timers via clocksource_of_init() */
-}
-
-static void __init ape6evm_legacy_init_irq(void)
-{
- void __iomem *gic_dist_base = ioremap_nocache(0xf1001000, 0x1000);
- void __iomem *gic_cpu_base = ioremap_nocache(0xf1002000, 0x1000);
-
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
- /* Do not invoke DT-based interrupt code via irqchip_init() */
-}
-
-
-static const char *ape6evm_boards_compat_dt[] __initdata = {
- "renesas,ape6evm",
- NULL,
-};
-
-DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_early = shmobile_init_delay,
- .init_irq = ape6evm_legacy_init_irq,
- .init_machine = ape6evm_add_standard_devices,
- .init_late = shmobile_init_late,
- .dt_compat = ape6evm_boards_compat_dt,
- .init_time = ape6evm_legacy_init_time,
-MACHINE_END
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 10/13] ARM: shmobile: ape6evm dts: Drop console= bootargs parameter
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (8 preceding siblings ...)
2015-03-05 1:58 ` [PATCH 09/13] ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform Simon Horman
@ 2015-03-05 1:58 ` Simon Horman
2015-03-05 1:58 ` [PATCH 11/13] PM / Domains: R-Mobile SYSC: Document R-Mobile APE6 (r8a73a4) binding Simon Horman
` (3 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:58 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Since ("ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform"),
ape6evm is restricted to booting from DT, so chosen/stdout-path is
always used, and we can drop the "console=" parameter from
chosen/bootargs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index 44c4cac..f9e8151 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -22,7 +22,7 @@
};
chosen {
- bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
stdout-path = &scifa0;
};
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 11/13] PM / Domains: R-Mobile SYSC: Document R-Mobile APE6 (r8a73a4) binding
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (9 preceding siblings ...)
2015-03-05 1:58 ` [PATCH 10/13] ARM: shmobile: ape6evm dts: Drop console= bootargs parameter Simon Horman
@ 2015-03-05 1:58 ` Simon Horman
2015-03-05 1:58 ` [PATCH 12/13] ARM: shmobile: r8a73a4 dtsi: Add PM domain support Simon Horman
` (2 subsequent siblings)
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:58 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
R-Mobile APE6 (r8a73a4) is handled fine by the same driver and bindings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
index cc3b1f0..beda7d2 100644
--- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
+++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.txt
@@ -11,6 +11,7 @@ Required properties:
- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
fallback.
Examples with soctypes are:
+ - "renesas,sysc-r8a73a4" (R-Mobile APE6)
- "renesas,sysc-r8a7740" (R-Mobile A1)
- "renesas,sysc-sh73a0" (SH-Mobile AG5)
- reg: Two address start and address range blocks for the device:
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 12/13] ARM: shmobile: r8a73a4 dtsi: Add PM domain support
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (10 preceding siblings ...)
2015-03-05 1:58 ` [PATCH 11/13] PM / Domains: R-Mobile SYSC: Document R-Mobile APE6 (r8a73a4) binding Simon Horman
@ 2015-03-05 1:58 ` Simon Horman
2015-03-05 1:58 ` [PATCH 13/13] ARM: shmobile: r8a73a4: Remove legacy code Simon Horman
2015-04-01 23:32 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Olof Johansson
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:58 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the System Controller, with subnodes that
represent the hardware power area hierarchy.
Hook up all devices to their respective PM domains.
Add a minimal device node for the Coresight-ETM hardware block, and
hook it up to the D4 PM domain, so the R-Mobile System Controller
driver can keep the domain powered, until the new Coresight code
handles runtime PM.
The System Controller is also used by the R-Mobile Reset driver, which
can now restart the system.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 177 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 177 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index d41201d..0fd889f 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -28,9 +28,15 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1500000000>;
+ power-domains = <&pd_a2sl>;
};
};
+ ptm {
+ compatible = "arm,coresight-etm3x";
+ power-domains = <&pd_d4>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -42,11 +48,13 @@
dbsc1: memory-controller@e6790000 {
compatible = "renesas,dbsc-r8a73a4";
reg = <0 0xe6790000 0 0x10000>;
+ power-domains = <&pd_a3bc>;
};
dbsc2: memory-controller@e67a0000 {
compatible = "renesas,dbsc-r8a73a4";
reg = <0 0xe67a0000 0 0x10000>;
+ power-domains = <&pd_a3bc>;
};
dmac: dma-multiplexer {
@@ -89,6 +97,7 @@
"ch12", "ch13", "ch14", "ch15",
"ch16", "ch17", "ch18", "ch19";
clocks = <&mstp2_clks R8A73A4_CLK_DMAC>;
+ power-domains = <&pd_a3sp>;
};
};
@@ -99,6 +108,7 @@
reg = <0 0xe60b0000 0 0x428>;
interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A73A4_CLK_IIC5>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -109,6 +119,7 @@
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
clock-names = "fck";
+ power-domains = <&pd_c5>;
renesas,channels-mask = <0xff>;
@@ -152,6 +163,7 @@
<0 29 IRQ_TYPE_LEVEL_HIGH>,
<0 30 IRQ_TYPE_LEVEL_HIGH>,
<0 31 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_c4>;
};
irqc1: interrupt-controller@e61c0200 {
@@ -185,6 +197,7 @@
<0 55 IRQ_TYPE_LEVEL_HIGH>,
<0 56 IRQ_TYPE_LEVEL_HIGH>,
<0 57 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_c4>;
};
pfc: pfc@e6050000 {
@@ -208,6 +221,7 @@
<&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
<&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
<&irqc1 24 0>, <&irqc1 25 0>;
+ power-domains = <&pd_c5>;
};
thermal@e61f0000 {
@@ -216,6 +230,7 @@
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+ power-domains = <&pd_c5>;
};
i2c0: i2c@e6500000 {
@@ -225,6 +240,7 @@
reg = <0 0xe6500000 0 0x428>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC0>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -235,6 +251,7 @@
reg = <0 0xe6510000 0 0x428>;
interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC1>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -245,6 +262,7 @@
reg = <0 0xe6520000 0 0x428>;
interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC2>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -255,6 +273,7 @@
reg = <0 0xe6530000 0 0x428>;
interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A73A4_CLK_IIC3>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -265,6 +284,7 @@
reg = <0 0xe6540000 0 0x428>;
interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A73A4_CLK_IIC4>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -275,6 +295,7 @@
reg = <0 0xe6550000 0 0x428>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC6>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -285,6 +306,7 @@
reg = <0 0xe6560000 0 0x428>;
interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC7>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -295,6 +317,7 @@
reg = <0 0xe6570000 0 0x428>;
interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A73A4_CLK_IIC8>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -304,6 +327,7 @@
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -313,6 +337,7 @@
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -322,6 +347,7 @@
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -331,6 +357,7 @@
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -340,6 +367,7 @@
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -349,6 +377,7 @@
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
clock-names = "sci_ick";
+ power-domains = <&pd_c4>;
status = "disabled";
};
@@ -357,6 +386,7 @@
reg = <0 0xee100000 0 0x100>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
status = "disabled";
};
@@ -366,6 +396,7 @@
reg = <0 0xee120000 0 0x100>;
interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
status = "disabled";
};
@@ -375,6 +406,7 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
status = "disabled";
};
@@ -384,6 +416,7 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
+ power-domains = <&pd_a3sp>;
reg-io-width = <4>;
status = "disabled";
};
@@ -393,6 +426,7 @@
reg = <0 0xee220000 0 0x80>;
interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
+ power-domains = <&pd_a3sp>;
reg-io-width = <4>;
status = "disabled";
};
@@ -417,6 +451,7 @@
ranges = <0 0 0 0x20000000>;
reg = <0 0xfec10000 0 0x400>;
clocks = <&zb_clk>;
+ power-domains = <&pd_c4>;
};
clocks {
@@ -711,4 +746,146 @@
"thermal", "iic8";
};
};
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile";
+ reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>;
+
+ pm-domains {
+ pd_c5: c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_c4: c4@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3sg: a3sg@16 {
+ reg = <16>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3ex: a3ex@17 {
+ reg = <17>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3sp: a3sp@18 {
+ reg = <18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2us: a2us@19 {
+ reg = <19>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a3sm: a3sm@20 {
+ reg = <20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2sl: a2sl@21 {
+ reg = <21>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a3km: a3km@22 {
+ reg = <22>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2kl: a2kl@23 {
+ reg = <23>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+ pd_c4ma: c4ma@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_c4cl: c4cl@2 {
+ reg = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_d4: d4@3 {
+ reg = <3>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4bc: a4bc@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3bc: a3bc@5 {
+ reg = <5>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4l: a4l@6 {
+ reg = <6>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4lc: a4lc@7 {
+ reg = <7>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4mp: a4mp@8 {
+ reg = <8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3mp: a3mp@9 {
+ reg = <9>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3vc: a3vc@10 {
+ reg = <10>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4sf: a4sf@11 {
+ reg = <11>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3r: a3r@12 {
+ reg = <12>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a2rv: a2rv@13 {
+ reg = <13>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a2is: a2is@14 {
+ reg = <14>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
+ };
};
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH 13/13] ARM: shmobile: r8a73a4: Remove legacy code
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (11 preceding siblings ...)
2015-03-05 1:58 ` [PATCH 12/13] ARM: shmobile: r8a73a4 dtsi: Add PM domain support Simon Horman
@ 2015-03-05 1:58 ` Simon Horman
2015-04-01 23:32 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Olof Johansson
13 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-03-05 1:58 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
All r8a73a4 boards are now used with multiplatform kernels only. We can
remove all the unused r8a73a4 legacy device and clock registration code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/Makefile | 1 -
arch/arm/mach-shmobile/clock-r8a73a4.c | 659 ---------------------------------
arch/arm/mach-shmobile/r8a73a4.h | 17 -
arch/arm/mach-shmobile/setup-r8a73a4.c | 273 +-------------
4 files changed, 2 insertions(+), 948 deletions(-)
delete mode 100644 arch/arm/mach-shmobile/clock-r8a73a4.c
delete mode 100644 arch/arm/mach-shmobile/r8a73a4.h
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 963d985..cf8b348 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -23,7 +23,6 @@ ifndef CONFIG_COMMON_CLK
obj-y += clock.o
obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o
-obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
deleted file mode 100644
index 1cf44dc..0000000
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ /dev/null
@@ -1,659 +0,0 @@
-/*
- * r8a73a4 clock framework support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "common.h"
-#include "clock.h"
-
-#define CPG_BASE 0xe6150000
-#define CPG_LEN 0x270
-
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR4 0xe6150140
-#define SMSTPCR5 0xe6150144
-
-#define FRQCRA 0xE6150000
-#define FRQCRB 0xE6150004
-#define FRQCRC 0xE61500E0
-#define VCLKCR1 0xE6150008
-#define VCLKCR2 0xE615000C
-#define VCLKCR3 0xE615001C
-#define VCLKCR4 0xE6150014
-#define VCLKCR5 0xE6150034
-#define ZBCKCR 0xE6150010
-#define SD0CKCR 0xE6150074
-#define SD1CKCR 0xE6150078
-#define SD2CKCR 0xE615007C
-#define MMC0CKCR 0xE6150240
-#define MMC1CKCR 0xE6150244
-#define FSIACKCR 0xE6150018
-#define FSIBCKCR 0xE6150090
-#define MPCKCR 0xe6150080
-#define SPUVCKCR 0xE6150094
-#define HSICKCR 0xE615026C
-#define M4CKCR 0xE6150098
-#define PLLECR 0xE61500D0
-#define PLL0CR 0xE61500D8
-#define PLL1CR 0xE6150028
-#define PLL2CR 0xE615002C
-#define PLL2SCR 0xE61501F4
-#define PLL2HCR 0xE61501E4
-#define CKSCR 0xE61500C0
-
-#define CPG_MAP(o) ((o - CPG_BASE) + cpg_mapping.base)
-
-static struct clk_mapping cpg_mapping = {
- .phys = CPG_BASE,
- .len = CPG_LEN,
-};
-
-static struct clk extalr_clk = {
- .rate = 32768,
- .mapping = &cpg_mapping,
-};
-
-static struct clk extal1_clk = {
- .rate = 26000000,
- .mapping = &cpg_mapping,
-};
-
-static struct clk extal2_clk = {
- .rate = 48000000,
- .mapping = &cpg_mapping,
-};
-
-static struct sh_clk_ops followparent_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct clk main_clk = {
- /* .parent will be set r8a73a4_clock_init */
- .ops = &followparent_clk_ops,
-};
-
-SH_CLK_RATIO(div2, 1, 2);
-SH_CLK_RATIO(div4, 1, 4);
-
-SH_FIXED_RATIO_CLK(main_div2_clk, main_clk, div2);
-SH_FIXED_RATIO_CLK(extal1_div2_clk, extal1_clk, div2);
-SH_FIXED_RATIO_CLK(extal2_div2_clk, extal2_clk, div2);
-SH_FIXED_RATIO_CLK(extal2_div4_clk, extal2_clk, div4);
-
-/* External FSIACK/FSIBCK clock */
-static struct clk fsiack_clk = {
-};
-
-static struct clk fsibck_clk = {
-};
-
-/*
- * PLL clocks
- */
-static struct clk *pll_parent_main[] = {
- [0] = &main_clk,
- [1] = &main_div2_clk
-};
-
-static struct clk *pll_parent_main_extal[8] = {
- [0] = &main_div2_clk,
- [1] = &extal2_div2_clk,
- [3] = &extal2_div4_clk,
- [4] = &main_clk,
- [5] = &extal2_clk,
-};
-
-static unsigned long pll_recalc(struct clk *clk)
-{
- unsigned long mult = 1;
-
- if (ioread32(CPG_MAP(PLLECR)) & (1 << clk->enable_bit))
- mult = (((ioread32(clk->mapped_reg) >> 24) & 0x7f) + 1);
-
- return clk->parent->rate * mult;
-}
-
-static int pll_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 val;
- int i, ret;
-
- if (!clk->parent_table || !clk->parent_num)
- return -EINVAL;
-
- /* Search the parent */
- for (i = 0; i < clk->parent_num; i++)
- if (clk->parent_table[i] = parent)
- break;
-
- if (i = clk->parent_num)
- return -ENODEV;
-
- ret = clk_reparent(clk, parent);
- if (ret < 0)
- return ret;
-
- val = ioread32(clk->mapped_reg) &
- ~(((1 << clk->src_width) - 1) << clk->src_shift);
-
- iowrite32(val | i << clk->src_shift, clk->mapped_reg);
-
- return 0;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
- .recalc = pll_recalc,
- .set_parent = pll_set_parent,
-};
-
-#define PLL_CLOCK(name, p, pt, w, s, reg, e) \
- static struct clk name = { \
- .ops = &pll_clk_ops, \
- .flags = CLK_ENABLE_ON_INIT, \
- .parent = p, \
- .parent_table = pt, \
- .parent_num = ARRAY_SIZE(pt), \
- .src_width = w, \
- .src_shift = s, \
- .enable_reg = (void __iomem *)reg, \
- .enable_bit = e, \
- .mapping = &cpg_mapping, \
- }
-
-PLL_CLOCK(pll0_clk, &main_clk, pll_parent_main, 1, 20, PLL0CR, 0);
-PLL_CLOCK(pll1_clk, &main_clk, pll_parent_main, 1, 7, PLL1CR, 1);
-PLL_CLOCK(pll2_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR, 2);
-PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4);
-PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5);
-
-SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2);
-
-static atomic_t frqcr_lock;
-
-/* Several clocks need to access FRQCRB, have to lock */
-static bool frqcr_kick_check(struct clk *clk)
-{
- return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31));
-}
-
-static int frqcr_kick_do(struct clk *clk)
-{
- int i;
-
- /* set KICK bit in FRQCRB to update hardware setting, check success */
- iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB));
- for (i = 1000; i; i--)
- if (ioread32(CPG_MAP(FRQCRB)) & BIT(31))
- cpu_relax();
- else
- return 0;
-
- return -ETIMEDOUT;
-}
-
-static int zclk_set_rate(struct clk *clk, unsigned long rate)
-{
- void __iomem *frqcrc;
- int ret;
- unsigned long step, p_rate;
- u32 val;
-
- if (!clk->parent || !__clk_get(clk->parent))
- return -ENODEV;
-
- if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) {
- ret = -EBUSY;
- goto done;
- }
-
- /*
- * Users are supposed to first call clk_set_rate() only with
- * clk_round_rate() results. So, we don't fix wrong rates here, but
- * guard against them anyway
- */
-
- p_rate = clk_get_rate(clk->parent);
- if (rate = p_rate) {
- val = 0;
- } else {
- step = DIV_ROUND_CLOSEST(p_rate, 32);
-
- if (rate > p_rate || rate < step) {
- ret = -EINVAL;
- goto done;
- }
-
- val = 32 - rate / step;
- }
-
- frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
-
- iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) |
- (val << clk->enable_bit), frqcrc);
-
- ret = frqcr_kick_do(clk);
-
-done:
- atomic_dec(&frqcr_lock);
- __clk_put(clk->parent);
- return ret;
-}
-
-static long zclk_round_rate(struct clk *clk, unsigned long rate)
-{
- /*
- * theoretical rate = parent rate * multiplier / 32,
- * where 1 <= multiplier <= 32. Therefore we should do
- * multiplier = rate * 32 / parent rate
- * rounded rate = parent rate * multiplier / 32.
- * However, multiplication before division won't fit in 32 bits, so
- * we sacrifice some precision by first dividing and then multiplying.
- * To find the nearest divisor we calculate both and pick up the best
- * one. This avoids 64-bit arithmetics.
- */
- unsigned long step, mul_min, mul_max, rate_min, rate_max;
-
- rate_max = clk_get_rate(clk->parent);
-
- /* output freq <= parent */
- if (rate >= rate_max)
- return rate_max;
-
- step = DIV_ROUND_CLOSEST(rate_max, 32);
- /* output freq >= parent / 32 */
- if (step >= rate)
- return step;
-
- mul_min = rate / step;
- mul_max = DIV_ROUND_UP(rate, step);
- rate_min = step * mul_min;
- if (mul_max = mul_min)
- return rate_min;
-
- rate_max = step * mul_max;
-
- if (rate_max - rate < rate - rate_min)
- return rate_max;
-
- return rate_min;
-}
-
-static unsigned long zclk_recalc(struct clk *clk)
-{
- void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg;
- unsigned int max = clk->div_mask + 1;
- unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) &
- clk->div_mask);
-
- return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) *
- (max - val);
-}
-
-static struct sh_clk_ops zclk_ops = {
- .recalc = zclk_recalc,
- .set_rate = zclk_set_rate,
- .round_rate = zclk_round_rate,
-};
-
-static struct clk z_clk = {
- .parent = &pll0_clk,
- .div_mask = 0x1f,
- .enable_bit = 8,
- /* We'll need to access FRQCRB and FRQCRC */
- .enable_reg = (void __iomem *)FRQCRB,
- .ops = &zclk_ops,
-};
-
-/*
- * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3
- * switching is only available in auto-DVFS mode
- */
-SH_FIXED_RATIO_CLK(pll0_div2_clk, pll0_clk, div2);
-
-static struct clk z2_clk = {
- .parent = &pll0_div2_clk,
- .div_mask = 0x1f,
- .enable_bit = 0,
- /* We'll need to access FRQCRB and FRQCRC */
- .enable_reg = (void __iomem *)FRQCRB,
- .ops = &zclk_ops,
-};
-
-static struct clk *main_clks[] = {
- &extalr_clk,
- &extal1_clk,
- &extal1_div2_clk,
- &extal2_clk,
- &extal2_div2_clk,
- &extal2_div4_clk,
- &main_clk,
- &main_div2_clk,
- &fsiack_clk,
- &fsibck_clk,
- &pll0_clk,
- &pll1_clk,
- &pll1_div2_clk,
- &pll2_clk,
- &pll2s_clk,
- &pll2h_clk,
- &z_clk,
- &pll0_div2_clk,
- &z2_clk,
-};
-
-/* DIV4 */
-static void div4_kick(struct clk *clk)
-{
- if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n"))
- frqcr_kick_do(clk);
- atomic_dec(&frqcr_lock);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10};
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
- .kick = div4_kick,
-};
-
-enum {
- DIV4_I, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
- DIV4_ZX, DIV4_ZS, DIV4_HP,
- DIV4_NR };
-
-static struct clk div4_clks[DIV4_NR] = {
- [DIV4_I] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 20, 0x0dff, CLK_ENABLE_ON_INIT),
- [DIV4_M3] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
- [DIV4_B] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 8, 0x0dff, CLK_ENABLE_ON_INIT),
- [DIV4_M1] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 4, 0x1dff, 0),
- [DIV4_M2] = SH_CLK_DIV4(&pll1_clk, FRQCRA, 0, 0x1dff, 0),
- [DIV4_ZX] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 12, 0x0dff, 0),
- [DIV4_ZS] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 8, 0x0dff, 0),
- [DIV4_HP] = SH_CLK_DIV4(&pll1_clk, FRQCRB, 4, 0x0dff, 0),
-};
-
-enum {
- DIV6_ZB,
- DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
- DIV6_MMC0, DIV6_MMC1,
- DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VCK4, DIV6_VCK5,
- DIV6_FSIA, DIV6_FSIB,
- DIV6_MP, DIV6_M4, DIV6_HSI, DIV6_SPUV,
- DIV6_NR };
-
-static struct clk *div6_parents[8] = {
- [0] = &pll1_div2_clk,
- [1] = &pll2s_clk,
- [3] = &extal2_clk,
- [4] = &main_div2_clk,
- [6] = &extalr_clk,
-};
-
-static struct clk *fsia_parents[4] = {
- [0] = &pll1_div2_clk,
- [1] = &pll2s_clk,
- [2] = &fsiack_clk,
-};
-
-static struct clk *fsib_parents[4] = {
- [0] = &pll1_div2_clk,
- [1] = &pll2s_clk,
- [2] = &fsibck_clk,
-};
-
-static struct clk *mp_parents[4] = {
- [0] = &pll1_div2_clk,
- [1] = &pll2s_clk,
- [2] = &extal2_clk,
- [3] = &extal2_clk,
-};
-
-static struct clk *m4_parents[2] = {
- [0] = &pll2s_clk,
-};
-
-static struct clk *hsi_parents[4] = {
- [0] = &pll2h_clk,
- [1] = &pll1_div2_clk,
- [3] = &pll2s_clk,
-};
-
-/*** FIXME ***
- * SH_CLK_DIV6_EXT() macro doesn't care .mapping
- * but, it is necessary on R-Car (= ioremap() base CPG)
- * The difference between
- * SH_CLK_DIV6_EXT() <--> SH_CLK_MAP_DIV6_EXT()
- * is only .mapping
- */
-#define SH_CLK_MAP_DIV6_EXT(_reg, _flags, _parents, \
- _num_parents, _src_shift, _src_width) \
-{ \
- .enable_reg = (void __iomem *)_reg, \
- .enable_bit = 0, /* unused */ \
- .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \
- .div_mask = SH_CLK_DIV6_MSK, \
- .parent_table = _parents, \
- .parent_num = _num_parents, \
- .src_shift = _src_shift, \
- .src_width = _src_width, \
- .mapping = &cpg_mapping, \
-}
-
-static struct clk div6_clks[DIV6_NR] = {
- [DIV6_ZB] = SH_CLK_MAP_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
- div6_parents, 2, 7, 1),
- [DIV6_SDHI0] = SH_CLK_MAP_DIV6_EXT(SD0CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_SDHI1] = SH_CLK_MAP_DIV6_EXT(SD1CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_SDHI2] = SH_CLK_MAP_DIV6_EXT(SD2CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_MMC0] = SH_CLK_MAP_DIV6_EXT(MMC0CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_MMC1] = SH_CLK_MAP_DIV6_EXT(MMC1CKCR, 0,
- div6_parents, 2, 6, 2),
- [DIV6_VCK1] = SH_CLK_MAP_DIV6_EXT(VCLKCR1, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_VCK2] = SH_CLK_MAP_DIV6_EXT(VCLKCR2, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_VCK3] = SH_CLK_MAP_DIV6_EXT(VCLKCR3, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_VCK4] = SH_CLK_MAP_DIV6_EXT(VCLKCR4, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_VCK5] = SH_CLK_MAP_DIV6_EXT(VCLKCR5, 0, /* didn't care bit[6-7] */
- div6_parents, ARRAY_SIZE(div6_parents), 12, 3),
- [DIV6_FSIA] = SH_CLK_MAP_DIV6_EXT(FSIACKCR, 0,
- fsia_parents, ARRAY_SIZE(fsia_parents), 6, 2),
- [DIV6_FSIB] = SH_CLK_MAP_DIV6_EXT(FSIBCKCR, 0,
- fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2),
- [DIV6_MP] = SH_CLK_MAP_DIV6_EXT(MPCKCR, 0, /* it needs bit[9-11] control */
- mp_parents, ARRAY_SIZE(mp_parents), 6, 2),
- /* pll2s will be selected always for M4 */
- [DIV6_M4] = SH_CLK_MAP_DIV6_EXT(M4CKCR, 0, /* it needs bit[9] control */
- m4_parents, ARRAY_SIZE(m4_parents), 6, 1),
- [DIV6_HSI] = SH_CLK_MAP_DIV6_EXT(HSICKCR, 0, /* it needs bit[9] control */
- hsi_parents, ARRAY_SIZE(hsi_parents), 6, 2),
- [DIV6_SPUV] = SH_CLK_MAP_DIV6_EXT(SPUVCKCR, 0,
- mp_parents, ARRAY_SIZE(mp_parents), 6, 2),
-};
-
-/* MSTP */
-enum {
- MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
- MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
- MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
- MSTP411, MSTP410, MSTP409,
- MSTP522, MSTP515,
- MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 4, 0), /* SCIFA0 */
- [MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 3, 0), /* SCIFA1 */
- [MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 6, 0), /* SCIFB0 */
- [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */
- [MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */
- [MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */
- [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC */
- [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */
- [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
- [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
- [MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */
- [MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */
- [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */
- [MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 16, 0), /* IIC6 */
- [MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 17, 0), /* IIC7 */
- [MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* IIC0 */
- [MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
- [MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */
- [MSTP409] = SH_CLK_MSTP32(&main_div2_clk, SMSTPCR4, 9, 0), /* IIC5 */
- [MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
- [MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
- [MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
- [MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR5, 15, 0), /* IIC8 */
-};
-
-static struct clk_lookup lookups[] = {
- /* main clock */
- CLKDEV_CON_ID("extal1", &extal1_clk),
- CLKDEV_CON_ID("extal1_div2", &extal1_div2_clk),
- CLKDEV_CON_ID("extal2", &extal2_clk),
- CLKDEV_CON_ID("extal2_div2", &extal2_div2_clk),
- CLKDEV_CON_ID("extal2_div4", &extal2_div4_clk),
- CLKDEV_CON_ID("fsiack", &fsiack_clk),
- CLKDEV_CON_ID("fsibck", &fsibck_clk),
-
- /* pll clock */
- CLKDEV_CON_ID("pll1", &pll1_clk),
- CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk),
- CLKDEV_CON_ID("pll2", &pll2_clk),
- CLKDEV_CON_ID("pll2s", &pll2s_clk),
- CLKDEV_CON_ID("pll2h", &pll2h_clk),
-
- /* CPU clock */
- CLKDEV_DEV_ID("cpu0", &z_clk),
-
- /* DIV6 */
- CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]),
- CLKDEV_CON_ID("vck1", &div6_clks[DIV6_VCK1]),
- CLKDEV_CON_ID("vck2", &div6_clks[DIV6_VCK2]),
- CLKDEV_CON_ID("vck3", &div6_clks[DIV6_VCK3]),
- CLKDEV_CON_ID("vck4", &div6_clks[DIV6_VCK4]),
- CLKDEV_CON_ID("vck5", &div6_clks[DIV6_VCK5]),
- CLKDEV_CON_ID("fsia", &div6_clks[DIV6_FSIA]),
- CLKDEV_CON_ID("fsib", &div6_clks[DIV6_FSIB]),
- CLKDEV_CON_ID("mp", &div6_clks[DIV6_MP]),
- CLKDEV_CON_ID("m4", &div6_clks[DIV6_M4]),
- CLKDEV_CON_ID("hsi", &div6_clks[DIV6_HSI]),
- CLKDEV_CON_ID("spuv", &div6_clks[DIV6_SPUV]),
-
- /* MSTP */
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
- CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]),
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
- CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]),
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
- CLKDEV_DEV_ID("e6c20000.serial", &mstp_clks[MSTP206]),
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
- CLKDEV_DEV_ID("e6c30000.serial", &mstp_clks[MSTP207]),
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
- CLKDEV_DEV_ID("e6ce0000.serial", &mstp_clks[MSTP216]),
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
- CLKDEV_DEV_ID("e6cf0000.serial", &mstp_clks[MSTP217]),
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
- CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]),
- CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
- CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
- CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
- CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]),
- CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
- CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
- CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
- CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.1", &mstp_clks[MSTP329]),
- CLKDEV_ICK_ID("fck", "e6130000.timer", &mstp_clks[MSTP329]),
- CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
- CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
- CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
- CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]),
-
- /* for DT */
- CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
-};
-
-void __init r8a73a4_clock_init(void)
-{
- void __iomem *reg;
- int k, ret = 0;
- u32 ckscr;
-
- atomic_set(&frqcr_lock, -1);
-
- reg = ioremap_nocache(CKSCR, PAGE_SIZE);
- BUG_ON(!reg);
- ckscr = ioread32(reg);
- iounmap(reg);
-
- switch ((ckscr >> 28) & 0x3) {
- case 0:
- main_clk.parent = &extal1_clk;
- break;
- case 1:
- main_clk.parent = &extal1_div2_clk;
- break;
- case 2:
- main_clk.parent = &extal2_clk;
- break;
- case 3:
- main_clk.parent = &extal2_div2_clk;
- break;
- }
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- shmobile_clk_init();
- else
- panic("failed to setup r8a73a4 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/r8a73a4.h b/arch/arm/mach-shmobile/r8a73a4.h
deleted file mode 100644
index 70dcd84..0000000
--- a/arch/arm/mach-shmobile/r8a73a4.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_R8A73A4_H__
-#define __ASM_R8A73A4_H__
-
-/* DMA slave IDs */
-enum {
- SHDMA_SLAVE_INVALID,
- SHDMA_SLAVE_MMCIF0_TX,
- SHDMA_SLAVE_MMCIF0_RX,
- SHDMA_SLAVE_MMCIF1_TX,
- SHDMA_SLAVE_MMCIF1_RX,
-};
-
-void r8a73a4_add_standard_devices(void);
-void r8a73a4_clock_init(void);
-void r8a73a4_pinmux_init(void);
-
-#endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index c276822..446cee6 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -13,280 +13,12 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/irq-renesas-irqc.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_timer.h>
+
+#include <linux/init.h>
#include <asm/mach/arch.h>
#include "common.h"
-#include "dma-register.h"
-#include "irqs.h"
-#include "r8a73a4.h"
-
-static const struct resource pfc_resources[] = {
- DEFINE_RES_MEM(0xe6050000, 0x9000),
-};
-
-void __init r8a73a4_pinmux_init(void)
-{
- platform_device_register_simple("pfc-r8a73a4", -1, pfc_resources,
- ARRAY_SIZE(pfc_resources));
-}
-
-#define R8A73A4_SCIF(scif_type, _scscr, index, baseaddr, irq) \
-static struct plat_sci_port scif##index##_platform_data = { \
- .type = scif_type, \
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
- .scscr = _scscr, \
-}; \
- \
-static struct resource scif##index##_resources[] = { \
- DEFINE_RES_MEM(baseaddr, 0x100), \
- DEFINE_RES_IRQ(irq), \
-}
-
-#define R8A73A4_SCIFA(index, baseaddr, irq) \
- R8A73A4_SCIF(PORT_SCIFA, SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
- index, baseaddr, irq)
-
-#define R8A73A4_SCIFB(index, baseaddr, irq) \
- R8A73A4_SCIF(PORT_SCIFB, SCSCR_RE | SCSCR_TE, \
- index, baseaddr, irq)
-
-R8A73A4_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
-R8A73A4_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
-R8A73A4_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
-R8A73A4_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
-R8A73A4_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
-R8A73A4_SCIFB(5, 0xe6cf0000, gic_spi(151)); /* SCIFB3 */
-
-#define r8a73a4_register_scif(index) \
- platform_device_register_resndata(NULL, "sh-sci", index, \
- scif##index##_resources, \
- ARRAY_SIZE(scif##index##_resources), \
- &scif##index##_platform_data, \
- sizeof(scif##index##_platform_data))
-
-static const struct renesas_irqc_config irqc0_data = {
- .irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */
-};
-
-static const struct resource irqc0_resources[] = {
- DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
- DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
- DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
- DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
- DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
- DEFINE_RES_IRQ(gic_spi(4)), /* IRQ4 */
- DEFINE_RES_IRQ(gic_spi(5)), /* IRQ5 */
- DEFINE_RES_IRQ(gic_spi(6)), /* IRQ6 */
- DEFINE_RES_IRQ(gic_spi(7)), /* IRQ7 */
- DEFINE_RES_IRQ(gic_spi(8)), /* IRQ8 */
- DEFINE_RES_IRQ(gic_spi(9)), /* IRQ9 */
- DEFINE_RES_IRQ(gic_spi(10)), /* IRQ10 */
- DEFINE_RES_IRQ(gic_spi(11)), /* IRQ11 */
- DEFINE_RES_IRQ(gic_spi(12)), /* IRQ12 */
- DEFINE_RES_IRQ(gic_spi(13)), /* IRQ13 */
- DEFINE_RES_IRQ(gic_spi(14)), /* IRQ14 */
- DEFINE_RES_IRQ(gic_spi(15)), /* IRQ15 */
- DEFINE_RES_IRQ(gic_spi(16)), /* IRQ16 */
- DEFINE_RES_IRQ(gic_spi(17)), /* IRQ17 */
- DEFINE_RES_IRQ(gic_spi(18)), /* IRQ18 */
- DEFINE_RES_IRQ(gic_spi(19)), /* IRQ19 */
- DEFINE_RES_IRQ(gic_spi(20)), /* IRQ20 */
- DEFINE_RES_IRQ(gic_spi(21)), /* IRQ21 */
- DEFINE_RES_IRQ(gic_spi(22)), /* IRQ22 */
- DEFINE_RES_IRQ(gic_spi(23)), /* IRQ23 */
- DEFINE_RES_IRQ(gic_spi(24)), /* IRQ24 */
- DEFINE_RES_IRQ(gic_spi(25)), /* IRQ25 */
- DEFINE_RES_IRQ(gic_spi(26)), /* IRQ26 */
- DEFINE_RES_IRQ(gic_spi(27)), /* IRQ27 */
- DEFINE_RES_IRQ(gic_spi(28)), /* IRQ28 */
- DEFINE_RES_IRQ(gic_spi(29)), /* IRQ29 */
- DEFINE_RES_IRQ(gic_spi(30)), /* IRQ30 */
- DEFINE_RES_IRQ(gic_spi(31)), /* IRQ31 */
-};
-
-static const struct renesas_irqc_config irqc1_data = {
- .irq_base = irq_pin(32), /* IRQ32 -> IRQ57 */
-};
-
-static const struct resource irqc1_resources[] = {
- DEFINE_RES_MEM(0xe61c0200, 0x200), /* IRQC Event Detector Block_1 */
- DEFINE_RES_IRQ(gic_spi(32)), /* IRQ32 */
- DEFINE_RES_IRQ(gic_spi(33)), /* IRQ33 */
- DEFINE_RES_IRQ(gic_spi(34)), /* IRQ34 */
- DEFINE_RES_IRQ(gic_spi(35)), /* IRQ35 */
- DEFINE_RES_IRQ(gic_spi(36)), /* IRQ36 */
- DEFINE_RES_IRQ(gic_spi(37)), /* IRQ37 */
- DEFINE_RES_IRQ(gic_spi(38)), /* IRQ38 */
- DEFINE_RES_IRQ(gic_spi(39)), /* IRQ39 */
- DEFINE_RES_IRQ(gic_spi(40)), /* IRQ40 */
- DEFINE_RES_IRQ(gic_spi(41)), /* IRQ41 */
- DEFINE_RES_IRQ(gic_spi(42)), /* IRQ42 */
- DEFINE_RES_IRQ(gic_spi(43)), /* IRQ43 */
- DEFINE_RES_IRQ(gic_spi(44)), /* IRQ44 */
- DEFINE_RES_IRQ(gic_spi(45)), /* IRQ45 */
- DEFINE_RES_IRQ(gic_spi(46)), /* IRQ46 */
- DEFINE_RES_IRQ(gic_spi(47)), /* IRQ47 */
- DEFINE_RES_IRQ(gic_spi(48)), /* IRQ48 */
- DEFINE_RES_IRQ(gic_spi(49)), /* IRQ49 */
- DEFINE_RES_IRQ(gic_spi(50)), /* IRQ50 */
- DEFINE_RES_IRQ(gic_spi(51)), /* IRQ51 */
- DEFINE_RES_IRQ(gic_spi(52)), /* IRQ52 */
- DEFINE_RES_IRQ(gic_spi(53)), /* IRQ53 */
- DEFINE_RES_IRQ(gic_spi(54)), /* IRQ54 */
- DEFINE_RES_IRQ(gic_spi(55)), /* IRQ55 */
- DEFINE_RES_IRQ(gic_spi(56)), /* IRQ56 */
- DEFINE_RES_IRQ(gic_spi(57)), /* IRQ57 */
-};
-
-#define r8a73a4_register_irqc(idx) \
- platform_device_register_resndata(NULL, "renesas_irqc", \
- idx, irqc##idx##_resources, \
- ARRAY_SIZE(irqc##idx##_resources), \
- &irqc##idx##_data, \
- sizeof(struct renesas_irqc_config))
-
-/* Thermal0 -> Thermal2 */
-static const struct resource thermal0_resources[] = {
- DEFINE_RES_MEM(0xe61f0000, 0x14),
- DEFINE_RES_MEM(0xe61f0100, 0x38),
- DEFINE_RES_MEM(0xe61f0200, 0x38),
- DEFINE_RES_MEM(0xe61f0300, 0x38),
- DEFINE_RES_IRQ(gic_spi(69)),
-};
-
-#define r8a73a4_register_thermal() \
- platform_device_register_simple("rcar_thermal", -1, \
- thermal0_resources, \
- ARRAY_SIZE(thermal0_resources))
-
-static struct sh_timer_config cmt1_platform_data = {
- .channels_mask = 0xff,
-};
-
-static struct resource cmt1_resources[] = {
- DEFINE_RES_MEM(0xe6130000, 0x1004),
- DEFINE_RES_IRQ(gic_spi(120)),
-};
-
-#define r8a73a4_register_cmt(idx) \
- platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \
- idx, cmt##idx##_resources, \
- ARRAY_SIZE(cmt##idx##_resources), \
- &cmt##idx##_platform_data, \
- sizeof(struct sh_timer_config))
-
-/* DMA */
-static const struct sh_dmae_slave_config dma_slaves[] = {
- {
- .slave_id = SHDMA_SLAVE_MMCIF0_TX,
- .addr = 0xee200034,
- .chcr = CHCR_TX(XMIT_SZ_32BIT),
- .mid_rid = 0xd1,
- }, {
- .slave_id = SHDMA_SLAVE_MMCIF0_RX,
- .addr = 0xee200034,
- .chcr = CHCR_RX(XMIT_SZ_32BIT),
- .mid_rid = 0xd2,
- }, {
- .slave_id = SHDMA_SLAVE_MMCIF1_TX,
- .addr = 0xee220034,
- .chcr = CHCR_TX(XMIT_SZ_32BIT),
- .mid_rid = 0xe1,
- }, {
- .slave_id = SHDMA_SLAVE_MMCIF1_RX,
- .addr = 0xee220034,
- .chcr = CHCR_RX(XMIT_SZ_32BIT),
- .mid_rid = 0xe2,
- },
-};
-
-#define DMAE_CHANNEL(a, b) \
- { \
- .offset = (a) - 0x20, \
- .dmars = (a) - 0x20 + 0x40, \
- .chclr_bit = (b), \
- .chclr_offset = 0x80 - 0x20, \
- }
-
-static const struct sh_dmae_channel dma_channels[] = {
- DMAE_CHANNEL(0x8000, 0),
- DMAE_CHANNEL(0x8080, 1),
- DMAE_CHANNEL(0x8100, 2),
- DMAE_CHANNEL(0x8180, 3),
- DMAE_CHANNEL(0x8200, 4),
- DMAE_CHANNEL(0x8280, 5),
- DMAE_CHANNEL(0x8300, 6),
- DMAE_CHANNEL(0x8380, 7),
- DMAE_CHANNEL(0x8400, 8),
- DMAE_CHANNEL(0x8480, 9),
- DMAE_CHANNEL(0x8500, 10),
- DMAE_CHANNEL(0x8580, 11),
- DMAE_CHANNEL(0x8600, 12),
- DMAE_CHANNEL(0x8680, 13),
- DMAE_CHANNEL(0x8700, 14),
- DMAE_CHANNEL(0x8780, 15),
- DMAE_CHANNEL(0x8800, 16),
- DMAE_CHANNEL(0x8880, 17),
- DMAE_CHANNEL(0x8900, 18),
- DMAE_CHANNEL(0x8980, 19),
-};
-
-static const struct sh_dmae_pdata dma_pdata = {
- .slave = dma_slaves,
- .slave_num = ARRAY_SIZE(dma_slaves),
- .channel = dma_channels,
- .channel_num = ARRAY_SIZE(dma_channels),
- .ts_low_shift = TS_LOW_SHIFT,
- .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
- .ts_high_shift = TS_HI_SHIFT,
- .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
- .ts_shift = dma_ts_shift,
- .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
- .dmaor_init = DMAOR_DME,
- .chclr_present = 1,
- .chclr_bitwise = 1,
-};
-
-static struct resource dma_resources[] = {
- DEFINE_RES_MEM(0xe6700020, 0x89e0),
- DEFINE_RES_IRQ(gic_spi(220)),
- {
- /* IRQ for channels 0-19 */
- .start = gic_spi(200),
- .end = gic_spi(219),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define r8a73a4_register_dmac() \
- platform_device_register_resndata(NULL, "sh-dma-engine", 0, \
- dma_resources, ARRAY_SIZE(dma_resources), \
- &dma_pdata, sizeof(dma_pdata))
-
-void __init r8a73a4_add_standard_devices(void)
-{
- r8a73a4_register_cmt(1);
- r8a73a4_register_scif(0);
- r8a73a4_register_scif(1);
- r8a73a4_register_scif(2);
- r8a73a4_register_scif(3);
- r8a73a4_register_scif(4);
- r8a73a4_register_scif(5);
- r8a73a4_register_irqc(0);
- r8a73a4_register_irqc(1);
- r8a73a4_register_thermal();
- r8a73a4_register_dmac();
-}
-
-#ifdef CONFIG_USE_OF
static const char *r8a73a4_boards_compat_dt[] __initdata = {
"renesas,r8a73a4",
@@ -298,4 +30,3 @@ DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
.init_late = shmobile_init_late,
.dt_compat = r8a73a4_boards_compat_dt,
MACHINE_END
-#endif /* CONFIG_USE_OF */
--
2.1.4
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1
2015-03-05 1:57 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Simon Horman
` (12 preceding siblings ...)
2015-03-05 1:58 ` [PATCH 13/13] ARM: shmobile: r8a73a4: Remove legacy code Simon Horman
@ 2015-04-01 23:32 ` Olof Johansson
2015-04-02 0:21 ` Simon Horman
13 siblings, 1 reply; 22+ messages in thread
From: Olof Johansson @ 2015-04-01 23:32 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Mar 05, 2015 at 10:57:57AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM based SoC r8a73a4 CCF and multiplatform
> updates for v4.1.
>
>
> This pull request is based on "Renesas ARM Based SoC Simple PM Bus Updates
> for v4.1", tagged as renesas-simple-pm-bus-for-v4.1, which you have already
> pulled. That pull request provides run-time dependencies for this one.
>
>
> This pull requests has minor conflicts with "Renesas ARM Based SoC sh7372
> SoC Removal Updates for v4.1", tagged as
> renesas-sh7372-soc-removal-for-v4.1, which you have already pulled.
>
> The conflicts are in the following files:
> arch/arm/mach-shmobile/Kconfig
> arch/arm/mach-shmobile/Makefile
>
> The solution is to delete both.
>
> This solution can be found in the renesas-next-20150305v2-v4.0-rc1 tag of
> the renesas tree.
>
>
> The following changes since commit 89d463ea106dba530786a2815fd174f9e6eab71f:
>
> drivers: bus: Add Simple Power-Managed Bus Driver (2015-02-24 06:36:18 +0900)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-r8a73a4-ccf-and-multiplatform-for-v4.1
>
> for you to fetch changes up to 914d7d148411997c2f76f689338d27c362300b7a:
>
> ARM: shmobile: r8a73a4: Remove legacy code (2015-02-25 16:14:02 +0900)
Thanks, merged.
I don't see a reason for you to split your branches per SoC like this
though -- you already had another multiplatform branch for another SoC,
you can combine the two.
-Olof
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1
2015-04-01 23:32 ` [GIT PULL] Renesas ARM Based SoC r8a73a4 CCF and Multiplatform Updates for v4.1 Olof Johansson
@ 2015-04-02 0:21 ` Simon Horman
0 siblings, 0 replies; 22+ messages in thread
From: Simon Horman @ 2015-04-02 0:21 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Apr 01, 2015 at 04:32:11PM -0700, Olof Johansson wrote:
> On Thu, Mar 05, 2015 at 10:57:57AM +0900, Simon Horman wrote:
> > Hi Olof, Hi Kevin, Hi Arnd,
> >
> > Please consider these Renesas ARM based SoC r8a73a4 CCF and multiplatform
> > updates for v4.1.
> >
> >
> > This pull request is based on "Renesas ARM Based SoC Simple PM Bus Updates
> > for v4.1", tagged as renesas-simple-pm-bus-for-v4.1, which you have already
> > pulled. That pull request provides run-time dependencies for this one.
> >
> >
> > This pull requests has minor conflicts with "Renesas ARM Based SoC sh7372
> > SoC Removal Updates for v4.1", tagged as
> > renesas-sh7372-soc-removal-for-v4.1, which you have already pulled.
> >
> > The conflicts are in the following files:
> > arch/arm/mach-shmobile/Kconfig
> > arch/arm/mach-shmobile/Makefile
> >
> > The solution is to delete both.
> >
> > This solution can be found in the renesas-next-20150305v2-v4.0-rc1 tag of
> > the renesas tree.
> >
> >
> > The following changes since commit 89d463ea106dba530786a2815fd174f9e6eab71f:
> >
> > drivers: bus: Add Simple Power-Managed Bus Driver (2015-02-24 06:36:18 +0900)
> >
> > are available in the git repository at:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-r8a73a4-ccf-and-multiplatform-for-v4.1
> >
> > for you to fetch changes up to 914d7d148411997c2f76f689338d27c362300b7a:
> >
> > ARM: shmobile: r8a73a4: Remove legacy code (2015-02-25 16:14:02 +0900)
>
> Thanks, merged.
>
> I don't see a reason for you to split your branches per SoC like this
> though -- you already had another multiplatform branch for another SoC,
> you can combine the two.
I think that the reason was that historically I had only done
multiplatform for one SoC at a time and thus had become used to
per-SoC multiplatform branches.
^ permalink raw reply [flat|nested] 22+ messages in thread